homeoneusa 
Nowadays, there are so many products of 120v 30 gallon hot water tank in the market and you are wondering to choose a best one. You have searched for 120v 30 gallon hot water tank in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 120v 30 gallon hot water tank which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
20,937 Reviews Scanned
Rheem 120V 1 Heating Chamber RTEX-04 Residential Tankless Water Heater
Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications
Rheem PROE20 1 RH POU Professional Classic Residential 20 Gallon Electric Point-of-Use Water Heater
- Exclusive tank lining resists corrosion and prolongs tank life
- Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements
- These units are U.L. listed and comply with Underwriter’s Laboratories Specifications 174
- Enhanced-flow brass drain valve on 2.5-gallon model
- This new Model number replaces the old Model number 81VP20S
Product Description
Efficiency: .93 EF for 30-gallon model – Single stainless steel heating element – High efficiency heating element – Over-temperature protector cuts off power in excess temperature situations – Automatic thermostat keeps water at desired temperature – Wall bracket for easy wall mount installations and corrosion resistant 1/4 turn drain valve included with 2.5 gallon model.
From the Manufacturer
Efficiency: .93 EF for 30-gallon model – Single stainless steel heating element – High efficiency heating element – Over-temperature protector cuts off power in excess temperature situations – Automatic thermostat keeps water at desired temperature – Wall bracket for easy wall mount installations and corrosion resistant 1/4 turn drain valve included with 2.5 gallon model
100305721 A.O. Smith Product Preservers Powered Anode Rod System
- The Product Preservers Powered Anode System uses patented adaptive technology that quickly adjusts to your water type providing the precise amount of current needed to deliver the best protection for your water heater tank
- Consistent protection is paramount in maintaining the integrity of the steel water heater tank. Built-in LED fault light and audible alarm provides peace of mind knowing the system is working properly.
- Installation is made easy for professionals with a small control box that can plug into any standard 120 volt wall outlet.
- Eliminates smelly water issues caused by sacrificial magnesium anodes. – Protects for years
- no maintenance required. – Great for softened water applications.
- The system is great for residential gas or electric 30-50 gallon water heater installations
The Product Preservers Powered Anode System is an ideal solution for eliminating smelly water caused by sacrificial magnesium anodes or to replace aluminum anodes where aluminum hydroxide is a problem. The system is also great for new residential gas or electric 30-50 gallon water heater installations providing protection for years with virtually no maintenance required. Protect your investment with a permanent anode rod made of titanium and mixed metal oxide that will never be depleted unlike traditional sacrificial anodes. This latest technology allows the system to quickly adjust to local water conditions providing the precise amount of current for the best protection of the water heater tank. Protection is maintained as long as the control module remains connected to a power source and continually adjusts the amount of protection needed. Additional features include a built-in LED fault light and audible alarm that provide peace of mind knowing the system is working properly.
Hygger Quiet Submersible Aquarium Water Pump for Water Transfer Quick Auto Electric Vacuum Siphon Aquarium Cleaning Pump for Fish Tank with Adaptors 215-1060 GPH
- 【VERSATILE】 Hygger Submersible Water Pump is a multi-functional pump in terms of aquarium cleaning water change, water circulation, transferring water and powering fountain waterfall
- 【WORKS LIKE A CHARM】Easy to use, simply plug in power for quick water draining, this bottom pump can remove water level down to 1/4″ and suck out 1/5″ debris and fish waste with ease
- 【RUN DRY PROTECTION】This aquarium pump shuts itself off when the protection circuit gets hot. And it runs again once it cool down (It is not auto shut off. You need to turn it off when not in use.)
- 【For 5-30 Gallon Tank】Provides efficient, instant water flow, power: 18W, Maximum flow rate: 215 GPH
- Max Lift Height: 5.3ft (power cord’s length: 6ft), Presented two different sizes of barb fittings for desired water flow: 1/2″ and 5/8″(PS: hose is not included)
- 【Oil-free Magnetic Driven Motor】Ideal for saltwater and freshwater aquariums, ponds, gardens, fountains, bird bathes and hydroponics up to 30 gallon
Flextrol FTH30 Hydronic Expansion Tanks-for Hot Water Heaters, Carbon Steel Shell 3/4 Inch MIP Connection, SBR Synthetic Rubber, 60 PSI, 210 Degrees Fahrenheit, Gray Color, 4.8 Gallons
- Hydronic Expansion Tanks Are Diaphragm Type Tanks Designed to Keep System Pressures Below Relief Valve Settings
- Hydronic (Forced Hot Water) Expansion Tanks Absorb the Expansion of Water in Residential or Commercial Hydronic Heating and Cooling Systems
- Low Profile Tank Design with Full Membrane Depth Eliminates Stretching of Diaphragm, Providing Increased Life Cycle
- Hydronic Non-Potable Expansion Tank for Closed Hot Water Heating Systems, Boilers
- MIG Welding Eliminates Interior Rough Spots and Sharp Edges
- High Grade Steel Construction
- Made In Italy
- Certified Synthetic SBR Rubber Diaphragm
What is Hydronic Expansion?
Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic (forced hot water) heating and cooling systems. Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic expansion tanks protect safety valves from failing or wearing out quickly, avoids valve stem and ball seal leaks, prevents wasted BTU’s and vastly extends water heater life.
Technical Features
- Certified synthetic SBR rubber diaphragm
- MIG welding eliminates interior rough spots and sharp edges
- Each tank is factory leak tested to ensure tank integrity
- All diaphragms designed to maximize drawdown
- External baked epoxy-polyester coating provides a durable appliance finish
- Welded side outlet allows easy and quick installation
- Protected pre charge valve eliminates potential leak path
- Low profile tank design with full membrane depth eliminates stretching of diaphragm, providing increased life cycle
Additional Description
- Shell: Carbon Steel
- Connection: Carbon Steel
- Diaphragm: SBR Synthetic Rubber
- Color: Gray
Operating Conditions
- Max. Operating Pressure: 60 PSI
- Operating Temperature: 210 Degrees Fahrenheit
- Factory Precharge: 12 PSI
- Warranty: 1 Year
Specifications
- Model Number: FTH30
- Tank Size: 4.8 Gallons
- Tank Weight: 6.8 Pounds
- Connection Size (National Pipe Thread): 1/2" Male Iron Pipe (MIP)
- Dimensions (LxWxH): 12" x 12" x 16"
- Acceptance Volume: 3.0 Gallons
- UPC Code: 80459513075
Aqua-Pure AP430SS Hot Water System Protector
- Binds calcium and magnesium hardness minerals, preventing them from precipitating out of solution and building up on metallic surfaces
- Contains siliphos, a 100% Pure FOOD Grade scale inhibitor approved by usda
- Stainless Steel head
- Flow rate 6 gallons per minute
- Max operating Temp. 100F
Product Description
Aquapure by cuno hot water system protector to reduce scale build up in pipes and extend life of water heater. Installs on cold water side of hot water system to inhibit scaling and corrosion. Whole house scale inhibition water treatment system. Ap430-10 features: -product type: whole house -filter component: filtration system -filter change indicator: no. Dimensions: -overall HEIGHT – top to bottom:13 -overall WIDTH – side to side:2 -overall depth – front to back:2 -overall product WEIGHT:2.25 . Do not install in direct sunlight or outdoors
From the Manufacturer
Aquapure by Cuno hot water system protector to reduce scale build up in pipes and extend life of water heater. Installs on cold water side of hot water system to inhibit scaling and corrosion.
MarineLand Magnum Polishing Internal Canister Filter
- The Marineland Magnum Polishing Internal Canister Filter uses powerful three stage filtration to ensure water clarity
- Water polishing option removes fine debris, leaving water crystal clear
- The Marineland Magnum Polishing Internal Canister Filter filters 290 gallons per hour and is ideal for aquariums up to 97 gallons
- No priming necessary. The submerged motor means quick and easy setup
- Dual-chamber media container allows for customizable media – Black Diamond Carbon is included
The Marineland Magnum Polishing Internal Canister Filter uses two refillable chambers to house carbon or customizable filter media. The Magnum PI Canister Filter is the most versatile filter Marineland has to offer. The submerged motor mean quick and easy start up, no priming necessary.
Similar items with 4 stars and above
Rheem PROE6 1 RH POU Professional Classic Residential 6 Gallon Electric Point-of-Use Water Heater
- Exclusive tank lining resists corrosion and prolongs tank life
- Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements
- These units are U.L. listed and comply with Underwriter’s Laboratories Specifications 174
- Enhanced-flow brass drain valve on 2.5-gallon model
- This new Model number replaces the old Model number 81VP6S
Product Description
Efficiency: .93 EF for 30-gallon model – Single stainless steel heating element – High efficiency heating element – Over-temperature protector cuts off power in excess temperature situations – Automatic thermostat keeps water at desired temperature – Wall bracket for easy wall mount installations and corrosion resistant 1/4 turn drain valve included with 2.5 gallon model.
From the Manufacturer
Efficiency: .93 EF for 30-gallon model – Single stainless steel heating element – High efficiency heating element – Over-temperature protector cuts off power in excess temperature situations – Automatic thermostat keeps water at desired temperature – Wall bracket for easy wall mount installations and corrosion resistant 1/4 turn drain valve included with 2.5 gallon model
American Standard CE-12-AS 12 gallon Point of Use Electric Water Heater
- Heavy gauge Steel tank
- Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion
- Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life
- Factory installed Brass temperature/pressure relief valve
- American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
Conclusion
By our suggestions above, we hope that you can found 120v 30 gallon hot water tank for you.Please don’t forget to share your experience by comment in this post. Thank you!
