The 9 Best 12V Pc Cooling Pump

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

LENX SC600 DC 12V PC Cpu Water Cooling System Tool Water Pump 132.09 GPH 10W Brushless Drive Water pump for Destop Computer Laptop computer

Specifications:
Power consumption:10W
Rated voltage: DC 12V
Rated current: 0.8A
Max flow rate: 500L/H (132.09G/H)
Max static head: 3m (9.8ft)
Diameter of inlet:Female G 1/4″
Diameter of outlet:Female G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:3000 RPM
Size:length 9 cm, height 8 cm, width 6cm.

NOTE:

1. Working at rated voltage (DC12V/0.8A). The positive pole is red wire, the negative pole is black wire,white wire is test wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump

Features:
G1/4 thread water pump for computer CPU water cooling system. Noiseless water cooling pump – Ultra-quiet operation won’t disturb you. Made of high-quality acrylic and plastic, ensure a long service life. Stable performance with high flow rate( 500L/H) Easy to install and use.
Specification:
Type: Water Pump
Voltage: 12V DC, large 4P / small 3P plug
Current: 0.8A
Power: 10W
Lift: 4 meters
Flow rate: 500L/H
Material: Acrylic + Plastic
Thread: G1/4
Inlet and outlet: 1/4 internal thread, Thread Coupling is NOT included
Weight: Approx. 290g
Size: Approx. 5 * 5 * 7.8cm /  2 * 2 * 3.1in
Package size: Approx. 13.5 * 8.5 * 9.5cm / 5.3 * 3.3 * 3.7in

Package list:
1 * Water Pump

Note:
Please allow slight error due to manual measurement. Thanks for your kind understanding.

LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 117 ml CO2 Cooler

Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 110 MM, diameter 50MM.

NOTE:

1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws

Specification:
Flow Rate: max 500L / H
Head: max 3 Meter
Power Connector: 3pin connector
Voltage: DC12V
Power: 10W
Noise: 16 DB
Working life: 50000 hours
Water tank capacity: 250 ml
Threaded connections: G 1/4″ DN8
Product Dimensions: Diameter 60mm × height 160mm

Package:
1 × Water Cooling DC Pump Tank 250ML F CPU CO2 Heat Exchanger Water Cooler 500 L/H

Specifications:
Material: PMMA + POM + Anode Aluminum
Color: Black + Transparency
Tank length: 110mm, 160mm, 210mm, 300mm (Optional)
Hole site: G1/4 Thread
Rated current: 0.8A
Rated power: 19W
Water pump flow: 800L/H
Starting voltage: 12V
Maximum voltage: 13.5V
Power interface: big 4pin, small 4pin
Overall Length: Approx. 19.5cm / 7.7in 
                                     or 24.5cm / 9.6in 
                                     or 29.5cm / 11.6in 
                                     or 38.5cm / 15.1in
Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)
Weight: Approx. 557-640g

Package List:
1 * Water Tank and Pump
2 * Plastic Buckle
2 * Metal Buckle
1 * Bag of Screw and Nut

Features:
1. In order to facilitate transportation, the pump and the water tank are disassembled and placed, and the user needs to install it simply.

Specifications:
Material: PMMA + POM + Anode Aluminum
Color: Black + Transparency
Tank length: 110mm, 160mm, 210mm, 300mm (Optional)
Hole site: G1/4 Thread
Rated current: 0.8A
Rated power: 19W
Water pump flow: 800L/H
Starting voltage: 12V
Maximum voltage: 13.5V
Power interface: big 4pin, small 4pin
Overall Length: Approx. 19.5cm / 7.7in 
                                     or 24.5cm / 9.6in 
                                     or 29.5cm / 11.6in 
                                     or 38.5cm / 15.1in
Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)
Weight: Approx. 557-640g

Package List:
1 * Water Tank and Pump
2 * Plastic Buckle
2 * Metal Buckle
1 * Bag of Screw and Nut

Product Name: Water Cooling Radiator

Product Specifications:
– Fitting Thread: G1/4 Inch;
– Fin density: 18 lines per inch
– Color: Black; Product Weight: 106g
– Type: Water Cooling; Material: Aluminum
– Mouth: 9.5 (D) mm; Model Number: 80mm;
– Longer Screw Size: 31 x 3 mm / 1.2” x 0.12”(L*D);
– Size: 105 x 80 x 37 mm / 4.1” x 3.1” x 1.5”(L*W*H);
– Tube Quantity: 8; Fit ID Tube Inner Diameter: 8 -12mm / 0.3” – 0.5”
– Fit ID Tube Outer Diameter: 9.5 mm / 0.37”; Shorter Screw Size: 7 x 3 mm / 0.3” x 0.12”(L*D)

Product Features:
– Pure aluminum fins
– Parts brazing seal as a whole
– Surface treatment: Dark paint
– Joint: disposable stainless steel-band
– The sealing process: vacuum aluminum brazing
– Item Type: Computer Radiator Water Cooling Cooler; Material: Metal
– Can be installed 80mm fan, mounting hole size: 69.5（D）×69.5（W）mm

✔Optimized for high performance at low cost,No weak welds nor leakage.
✔Suitable for computer CPU cooling, industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.

Package Included:
1 x Aluminum Heat Exchanger High speed fan
NOTE: Screw holes below is channel pipe, so make sure not to use long screw, will top leaking.

Specifications:
Material: PMMA + POM + Anode Aluminum
Color: Black + Transparency
Tank length: 110mm, 160mm, 210mm, 300mm (Optional)
Hole site: G1/4 Thread
Rated current: 0.8A
Rated power: 19W
Water pump flow: 800L/H
Starting voltage: 12V
Maximum voltage: 13.5V
Power interface: big 4pin, small 4pin
Overall Length: Approx. 19.5cm / 7.7in 
                                     or 24.5cm / 9.6in 
                                     or 29.5cm / 11.6in 
                                     or 38.5cm / 15.1in
Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)
Weight: Approx. 557-640g

Package List:
1 * Water Tank and Pump
2 * Plastic Buckle
2 * Metal Buckle
1 * Bag of Screw and Nut

Conclusion

By our suggestions above, we hope that you can found 12v pc cooling pump for you.Please don’t forget to share your experience by comment in this post. Thank you!