Which Is The Best 3M Respirator Kit

The 3M Mold Remediation Respirator Kit 69097 includes one large sized 3M Full Face piece Reusable Respirator 6900 plus 2 pair (4 total) 3M Particulate Filters 2097. The 3M Particulate Filter 2097, P100, helps provide respiratory protection against exposure to mold, lead, asbestos, cadmium, arsenic, and MDA (methylenedianiline). This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odor relief from organic vapors that are below the PEL. The 3M Full Face piece Reusable Respirator 6000 Series is a lightweight, well-balanced, full face respirator design with silicone face seal for enhanced comfort and durability. The 3M Cool Flow Valve helps make breathing easier. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Full Face piece Reusable Respirator 6000 Series with 3M cartridges, filters or PAPR and supplied air systems to help reduce breathing certain airborne contaminants. The 3M Full Face piece Reusable Respirator 6000 Series face piece also meets the impact requirements of the ANSI Z87. 1-2010 standard, high impact level for face and eye protection. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U. S. , a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910. 134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94. 4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U. S. A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g. , for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. g. , U. S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Product Description

3M Paint Respirator Supply Kit is used by professionals for certain paint spraying, solvents and pesticides. Designed for performance and comfort, 3M Paint Project Respirator features a balanced design for a more comfortable fit. 3M Paint Respirator Supply Kit is a great choice in respiratory protection for the pro.

From the Manufacturer

3M Respirator Supply Kit R6023 includes one set of 3M Cartridge 6001, one set of 3M Filter 5P71 and one set of 3M Retainer 501. Kit is an excellent tool to convert competitive facepiece users to 3M. By providing a setup of cartridges, filters and retainers all the consumer needs to purchase is a 3M Respirator.

Product Description

Use with 3M Filters 2000 Series, 3M Filter 7093 P100, 3M Cartridges 6000 Series, or 3M Dual Airline Systems against a variety of gases, vapours and particulate hazards according to NIOSH approvals. Reliable, convenient, compatible respiratory protection: The 3M Full Facepiece Reusable Respirator 6000 Series offers versatility for many envrionments and applications and helps provide respiratory protection against a wide variety of gases and vapors when used with approved catridges and filters. For use with 3M Cartridges 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvalsWhen properly fitted and used with approved 3M Cartridges and Filters, helps provide respiratory protection from a variety of gases, vapors and particulate hazards at concentrations up to 10 times the Permissible Exposure Limit (PEL). Not for use in environments that are immediately dangerous to life or health (IDLH).

From the Manufacturer

3M&#8482 Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants while still allowing for a wide field of view and wearer comfort. The large lens provides a panoramic field of view, allowing the worker to see better. An improved field of view can help increase both safety and productivity. All sizes of this lightweight facepiece weigh 2 pounds or less, which enhances comfort and promotes better worker compliance in wearing respiratory protection. This versatile respiratory protection facepiece works with numerous 3M particulate filters, gas/vapor cartridges and supplied air respirator systems, allowing for specialized use with multiple applications (filters, cartridges and supplied air systems sold separately).

 

Wide field of view – cartridge shown sold separately view larger

Curved lens offers peripheral viewing view larger

Rear view showing comfortable silicone faceseal view larger

Cool and comfortable breathing
This reusable respirator comes with a 3M Cool Flow&#8482 valve. This proprietary valve is designed to release hot, humid exhaled breath quickly, helping to prevent unpleasant build-up of heat inside the facepiece. Respirators with Cool Flow valves are ideal for long periods of wear, especially where conditions are hot, humid, or physically demanding.

 

A versatile respirator for many applications and industries
Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.

 

Meets industry recognized government standards
NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce inhalation of certain airborne contaminants. The 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2003 standard, high impact level for face and eye protection.

 

Protects the health of workers
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable to wear.

 

About 3M Company
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Cartridges Compatible with 3M Full Facepiece Reusable Respirator 6000 Series
	3M Multi Gas Vapor Cartridge/Filter P100	3M Organic Vapor/Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge	3M Ammonia Methylamine Organic Vapor Cartridge/Filter P100	3M Formaldehyde Organic Vapor Cartridge/Filter P100	3M Mercury Vapor Chlorine Gas Cartridge/Filter P100	3M Mercury Organic Vapor or Acid Gas Cartridge
Part Number	60926	60928	60922	6002	60924	60925	60929	6009
NIOSH Color Code	Magenta Olive	Magenta Yellow	Magenta White	White	Magenta Green	Magenta Black Olive	Magenta Orange	Orange
NIOSH Approved for:
Chlorine
Hydrogen Chlorine
Sulfur Dioxide
Chlorine Dioxide
Hydrogen Sulfide
Particulates
Ammonia
Methylamine
Formaldehyde
Certain Organic Vapors
Hydrogen Fluoride
Mercury Vapor

Product Description

This half facepiece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals. Compatible and convenient respiratory protection. Half facepiece reusable respirator. Offers reliable, convenient respiratory protection when combined with particulate filters or cartridges (such as organic vapor/acid gas cartridges) or dual airline system. Comes with reclosable storage bag. When properly fitted, helps provide respiratory protection from a variety of gases, vapors and particulate hazards at concentrations up to 10 times the permissible exposure limit (PEL). Not for use in environments that are immediately dangerous to life or health (IDLH). Connection type: bayonet. Facepiece type: half facepiece reusable. Harness type: 4 point. Primary material: thermoplastic elastomer (TPE). Product type: half facepiece. Recommended application: chemical clean-up, chemical handling, chipping, chiseling, furnace operations, grinding, laboratories, machining, masonary, painting, pouring/casting, sanding, sawing, welding. Recommended industry: agriculture, automotive, chemicals, construction, general manufacturing, mining, oil and gas, pharmaceuticals, primary metals, transportation. Size: large.

From the Manufacturer

The 3M™ Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps that allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time.

NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with 3M cartridges, filters or supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals.

Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Cartridges Compatible with 3M 6000 Series Half Facepiece Reusable Respirator
	3M Multi Gas Vapor Cartridge/Filter P100	3M Organic Vapor/Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge	3M Ammonia Methylamine Organic Vapor Cartridge/Filter P100	3M Formaldehyde Organic Vapor Cartridge/Filter P100	3M Mercury Vapor Chlorine Gas Cartridge/Filter P100	3M Mercury Organic Vapor or Acid Gas Cartridge
Part Number	60926	60928	60922	6002	60924	60925	60929	6009
NIOSH Color Code	Magenta Olive	Magenta Yellow	Magenta White	White	Magenta Green	Magenta Black Olive	Magenta Orange	Orange
NIOSH Approved for:
Chlorine
Hydrogen Chlorine
Sulfur Dioxide
Chlorine Dioxide
Hydrogen Sulfide
Particulates
Ammonia
Methylamine
Formaldehyde
Certain Organic Vapors
Hydrogen Fluoride
Mercury Vapor

Product Description

3M Paint Project Respirator is used for certain paint spraying, solvents and pesticides. Designed for performance and comfort, 3M Paint Project Respirator features a balanced design for a more comfortable fit. The swept back cartridges are positioned to enhance visibility making it easier to see the project you are working on. 3M Paint Project Respirator is a great choice in respiratory protection for the professional.

Amazon.com

Use when around solvents, pesticides, and paint; helps protect against certain airborne contaminants.

Includes swept back cartridges for improved visibility

3M Respirators

As one of the leading designers and manufacturers of respirators in the world, 3M provides products that address the needs of both workplace, regulated applications and do-it-yourself, non-regulated applications. For workplace uses, employees may be exposed to known concentrations of harmful contaminants for part or all of the workday. In these situations, respirators are intended to help protect the wearer by reducing their exposure to airborne contaminants from a level that may be hazardous to one that is considered safe or acceptable according to government established levels. In addition, home users cannot easily determine exposure levels nor do they have ready access to the type of training medical evaluation and fit testing needed to be in compliance with workplace respirator standards. In these situations, respirators are intended to help keep non-harmful dusts and certain particles out of your nose, mouth and lungs and with some filters help eliminate annoying odors only.

About NIOSH Respirators

This respirator is government approved by the National Institute for Occupational Safety and Health (NIOSH) as an N95 class respirator and is designed for workplace, regulated uses and applications. NIOSH certification means the respirator has passed stringent government performance standards including filtration efficiency testing and provides at least 95% filtration efficiency solid and liquid particles that do not contain oil.

Fitting Instructions

1. Place respirator over mouth and nose, then pull harness over the crown of your head

2. Take bottom straps in both hands, place them in back of your neck, and hook them together.

3. Position face-piece low on the bridge of your nose for optimal visibility and best fit.

4. Adjust top straps first, then lower neck straps by pulling on ends. Do not pull too tight. Strap tension can be decreased by pushing out on back side of buckles. Perform a positive pressure seal check.

Positive Pressure Seal Check

1. Place the palm of your hand over the exhalation valve cover and exhale gently. If face-piece bulges slightly and no air leaks are detected between your face and the face-piece, a proper fit has been obtained

2. If air leakage is detected, reposition respirator on your face and/or readjust tension of the elastic straps to eliminate leakage

3. Repeat above steps until a tight seal is obtained

What’s in the box

One 3M respirator face-piece, one pair organic cartridges, two pair pre-filters, one pair filter retainers

Protect your health while working on your DIY project

NIOSH Certification Guide

See all Product description

Product Description

3M Mold and Lead Paint Removal Respirator is used for the professional remediation of mold. In accordance with US-EPA Guidelines and for sanding and scraping lead-based paint, 3M Mold and Lead Paint Removal Respirator helps reduce exposure to mold spores and odors. 3M Mold and Lead Paint Removal Respirator is a great choice in mold and lead paint respiratory protection for the professional.

From the Manufacturer

3M(TM) TEKK Protection(TM) Mold and Lead Particle Respirator 6297PA1-A, Size Medium.

The 3M Versaflo Powered Air Purifying Respirator TR-600-ECK is a is a compact, lightweight, easy-to-use PAPR for protection against certain particulates, vapors and gases. It includes everything required to get started. The kit includes S-433 Hood Assembly, TR-614 PAPR Assembly (includes TR-602N motor/blower, TR-630 Standard Lithium-ion Battery, BT-30 Length Adjusting Breathing Tube, TR-627 Easy Clean Belt and TR-971 Airflow Indicator), TR-6710N (HE) Filter for particulates and TR-6700FC filter cover, TR-641 Single Station Battery Charger, and BT-922 disposable breathing tube cover. This ready-to-use kit provides a simple way to purchase a complete PAPR system for use in operations where it is important to be able to easily clean the PAPR system. Suitable for applications such as pharmaceutical Manufacturing, health care, food processing, painting, and lead battery manufacturing/recycling. 3M Versaflo S-Series Hoods are designed to provide users with the optimal level of comfort. They feature wide face seals with soft elastic for improved comfort and reduced air flow noise. A comfortable stream of air is directed into the headgear which may help make hot environments more tolerable while reducing visor fogging. Breathing tubes feature the innovative 3M Quick Release Swivel (QRS) connection. Simply push the QRS end of the breathing tube into the air inlet of the headgear until it snaps into place. The breathing tube can be quickly removed with only one hand by squeezing the breathing tube clips. When combined with approved 3M Versaflo parts, the TR-602N motor/blower becomes part of a NIOSH approved respirator assembly featuring: multiple speeds, audible, visual and vibratory alarms and the capacity to work with a wide variety of head tops, filters and cartridges. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U. S. , a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910. 134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94. 4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U. S. A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g. , for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. g. , U. S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Product Description

The 3M 6291 Half Facepiece Respirator Assembly includes the 3M Half Facepiece Respirator 6200 and 3M P100 Particulate Filters 2091. Helps provide respiratory protection in environments containing certain oil and non-oil based particles.

From the Manufacturer

3M™ Half Facepiece Reusable Respirator Assembly includes a 3M™ 6000 Series Half Facepiece Reusable Respirator and two 3M™ 2091 P100 Particulate Filters. This assembly is NIOSH approved for environments containing certain oil and non-oil based particles. When properly fitted, this respirator helps provide protection in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead asbestos, cadmium, arsenic, and MDA at concentrations up to 10 times the Permissible Exposure Limit (PEL).

Combining Comfort and Convenience
This respirator is remarkably comfortable, soft, and lightweight, and features easy-to-adjust head straps. The swept-back design of the cartridges helps improve balance and visibility. Easy-to-adjust head straps allow for a customized fit to the user. When used to capacity, the included cartridges can be removed and replaced with new P100 Filter/Cartridges or other NIOSH approved 3M™ 2000 or 2200 Series Filters or 6000 Series Cartridges. The respirator can also be disassembled, cleaned, and reused, extending the life and cost effectiveness of the product.

Meets Government Safety Standards
NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The 6000 Series is NIOSH approved for negative air purifying and positive pressure dual airline applications. The respirator comes with a P100 filter, which is replaceable. This half facepiece respirator may be used with any of these replacements: 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals.

Importance of Respiratory Protection
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

About 3M Company
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Product Description

3M Professional Paint Respirator is used for certain paint spraying, solvents and pesticides. Offering both comfort and protection, 3M Professional Paint Respirator features 3M Cool Flow Valve technology for heat reduction and easier breathing. Designed and constructed for exceptional performance and comfort that lasts, 3M Professional Paint Respirator is an ideal choice in respiratory protection for the professional.

Amazon.com

The 3M Professional Paint Respirator (view larger).

Used by professionals for certain paint spraying, solvents and pesticides, the 3M Professional Paint Respirator (model R-7512ES) provides at least 95 percent filtration efficiency against solid and liquid aerosols including oils. Designed and constructed for exceptional performance and comfort that lasts, the Professional Paint Respirator features 3M Cool Flow Valve technology for heat reduction and easier breathing. It is NIOSH approved at OV/P95.

Specifications

Product Type	Dual-cartridge respirator
Applications	Spraying paint, using solvents and applying pesticides
Usage	Odors from chemical strippers, stains, varnishes, paints, pesticides, etc. Particulate matter (dust from sanding, sawing, grinding, sweeping, etc.)
HEPA	No
NIOSH Filter Approval Rating	OV/P95
Valved vs. Non-Valved	Valved
Size	Medium

What’s in the Box

Kit contains one facepiece, one pair 6001 cartridges, one pair 501 retainers, and two pair 5P71 filters

Why 3M Safety?

Doing it right means doing it safely. That means choosing the right safety products before the project begins. With a full portfolio of personal protection and home safety products, 3M Safety Products are designed to help keep DIYers and professionals protected in and around the home. We strive to give consumers the confidence in knowing they are prepared with reliable products from a trusted brand, so they can stay focused on the task at hand, not on their safety products.

R-7512ES Professional Half-Mask Organic Vapor

At a Glance

• For workplace/occupational applications only
• 3M Cool Flow Valve technology for heat reduction and easier breathing
• Silicone facepiece for soft, secure fit
• NIOSH approved: OV/P95
• Medium-sized

From the Manufacturer

3M Professional Series Respirator Assembly R7512ES, OV/P95 Medium. 3M recommended for exposures to organic vapors and mists commonly associated with spray painting, lawn and garden pesticides, staining or refinishing decks and hardwood floors, and many other applications. Assembly consists of 3M Half Facepiece 7502/37082(AAD), Medium, 1 each; 3M Organic Vapor Cartridge 6001, 2 each; 3M Particulate Filter 5P71/07194(AAD), P95, 4 each; 3M Retainer 501, 2 each.

3M Tekk Protection 27 Pack Respirator Cool Valve Filtering Facepiece Particulate Respirator N95 Lightweight Comfortable “M” Nose Clip Recommended For Sanding & Preparation Before Painting NIOSH Approved: N95

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m respirator kit, eg:

• What are Top 10 3m respirator kit for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m respirator kit to buy?
• What are Top Rated 3m respirator kit to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m respirator kit?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m respirator kit.
• Before deciding to buy any 3m respirator kit, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m respirator kit and What you should consider when buying the 3m respirator kit and Where to Buy or Purchase the 3m respirator kit. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m respirator kit of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m respirator kit.

Conclusion

By our suggestions above, we hope that you can found 3m respirator kit for you.Please don’t forget to share your experience by comment in this post. Thank you!