homeoneusa 
Nowadays, there are so many products of 40mm cooling fan heat sink in the market and you are wondering to choose a best one. You have searched for 40mm cooling fan heat sink in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 40mm cooling fan heat sink which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)
- ❃❃ Power Connection: 2 Pin-ph2.5
- ❃❃ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 24V, 0.06A.
Similar items with 4 stars and above
Heatsink fan for DaHua DVR Fan,HDCVI Camera Fan,DAHUA DVR 5V motherboard fan, 5V DAHUA Fan, 2Wire 2Pin Cooler Fan (shell fan)
Voltage:5V
Hole Size:45*45mm
Line: 2Wire
Remark:ship it from china within 24hours via ePacket ,then you can get it about 5~10days or so.
Similar items with 4 stars and above
BAY Direct Heatsink Cooling fan for DaHua DVR/HDCVI Camera Fan DVR Motherboard Fan 5V DAHUA Fan with 2 Wire 2 Pin
Feature
Voltage:5V
2Wire 2Pin
Package:
1 * DaHua DVR HDCVI Camera Fan
1 * Warranty Card
Easycargo 40mm Heatsink Fan 12V Kit, Cooler Heat Sink + 12V Ball Bearing Fan + Silicon Thermal Tape + Grill Screw Mounting Kit (1)
- 40mm Fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc
- Fan specifications: Ball bearing, speed 6500rpm, airflow 7.93CFM, noise level: 28 dBA, life time: 50000 hours,, start up voltage: 7V DC, working voltage range: 10.8-13.2V DC
- Fan dimension: 40x40x10mm, 12V DC, wire connector 2-pin-2.5mm, wire length: 5.9″/15cm.
- Heatsink dimension: 40x40x11mm, Adhesive silicone pad dimension: 40x40x0.5mm.
- Each pack includes: 1pc 12V DC fan, 1pc heatsink, 1pc silicone pad, 1 metal grill, screw monthing screw nut set.
12V DC cooler fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier. Each pack includes: 1pc 12V DC fan, 1pc heatsink, 1pc silicone pad, 1 metal grill, screw monthing screw nut set. Fan dimension: 40x40x10mm, 12V DC, wire 2-pin-2.5mm connector 5.9″/15cm, speed: 6500rpm, airflow 7.93CFM, noise level: 28 dBA, life time: 50000 hours,, start up voltage: 7V DC, working voltage range: 10.8-13.2V DC.
Similar items with 4 stars and above
Yuanhaourty 40mm PC Cooling Fan Heatsink Northbridge Chipset Aluminium Cooler Heatsink for 3D Printer Cooling
- ✿ 40x40x10mm 12V 3-pin cooling fan for computer motherboard north bridge.
- ✿ Convenient to paste in to your north bridge. It is easy to use. Keeps computer working well.
- ✿ Air Flow: 10-28CFM Life: 35000 hours
- ✿ Rated Current: 0.087Amp ±10% Fan Speed: 5500 RPM±10%
- ✿ Noise Level: 16-25dBA
Specifications:
Material: Plastic + Aluminum Alloy
Color: Black + Orange
Fan Size: 40×40×10mm
Connector: 3pin
Voltage: DC 12V
Rated Current: 0.087Amp ±10%
Bearing: Sleeve Bearing
Fan Speed: 5500 RPM±10%
Noise Level: 16-25dBA
Air Flow: 10-28CFM
Life: 35000 hours
Quantity: 1 PC (other accessories demo in the picture is not included)
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes: (No retail package)
1 x PC North Bridge Chipset Cooling Heatsink Fan
iUniker Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case with Cooling Fan, Raspberry Pi 4 Heatsink, Simple Removable Top Cover for Pi 4 Model B/ 4B (Black with Large Fan)
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 40mm Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi 4 Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 4 Model B
Wendry 24V 2-Pin Cooling Blower Fan,DC Fan Blower Fan Mini Quiet Cooling Fan for 3D Printer,Water Proof dustproof Low Noise,40mm
- 2-pin connector, no wiring connection required, easy to install.
- Water proof, dustproof and low noise.
- High heat dissipation efficiency.
- Provide you with the best accessories to extend the service life of the 3D printer.
- Excellent quality and durability.
Features:
1. 2-pin connector, no wiring connection required, easy to install.
2. Water proof, dustproof and low noise.
3. High heat dissipation efficiency.
4. Provide you with the best accessories to extend the service life of the 3D printer.
5. Excellent quality and durability.
Specifications:
Size: Approx. 40*40*10mm/1.57*1.57*0.39in
Voltage: DC24V
Rated current: 0.1A
Screw hole diameter 1.5mm
Wiring: red positive black negative
Speed: 7600 ± 10% RPM
Noise: 27DBA
Package List:
1 * Blower
Argon ONE Raspberry Pi 4 Case with Cooling Fan | Aluminum Heatsink | Power Button | Supports Retro Gaming, Movies, and Music | for Raspberry Pi 4 Model B
- SLEEK ALUMINUM ENCLOSURE | Made with aluminum alloy and polished with a modern Space Grey finish for stunning aesthetics and functionality.
- PASSIVE AND ACTIVE COOLING | The whole case top acts as a passive cooling for the Raspberry Pi. And a software controllable fan is added inside the case for better temperature management.
- EASY ASSEMBLY & NEAT CABLE MANAGEMENT | Assembling the case with the Raspberry Pi is easy. Installing the Argon ONE Script that unlocks the full functionality of the Argon ONE in one line. All of the ports are accessed at the back, making the mini-computer manageable with minimal cable clutter and easy cleaning.
- PROPER SYSTEM SHUTDOWN | A proper power button is installed on the case to prevent file damage. It safely Shutdowns, Reboots, and Forced Shutdowns functions are built in features.
- MAGNETIC REMOVABLE TOP & ACCESS TO GPIO | The PCB Board built into the case provides separate power sources to the fan and power switch, as well as extending the GPIO pins to use the case in multiple projects.
Forgun PC Northbridge Chipset Aluminium Cooler Heatsink 40mm Fan for 3D Printer Cooling
description:
40x40x10mm 12V 3-pin cooling fan for computer motherboard north bridge.
100% brand new and high quality.
It is easy to use.
Features:
Convenient to paste in to your north bridge.
Material: Plastic + Aluminum Alloy
Keeps computer working well.
Specifications:
Fan Size: 40×40×10mm
color: black + orange
Voltage: DC 12V
Rated Current: 0.087Amp ±10%
Fan Speed: 5500 RPM±10%
3pin Connector:
bearing, sleeve bearing
Air Flow: 10-28CFM
noise level: 16 – 25dba
Life: 35000 hours
Quantity: 1 PC (other accessories demo in the picture is not included)
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
the picture may not reflect the actual color of the item. Thank you!
3.Due to the difference between different monitors
Package includes: (No retail package)
1 x PC North Bridge Chipset Cooling Heatsink Fan
Smraza Raspberry Pi 4 Case, Acrylic Case with Cooling Blink Fan, 4PCS Heatsinks, 5V 3A Type-C Power Supply, Built in Fan with LED, Compatible with Raspberry Pi 4 Model B – White and Red
- Raspberry pi 4 Case with Snap-on Design – 2 layers acrylic case for raspberry pi 4 model b is easy to assemble and portable to carrying. (Raspberry pi board and SD card are not included)
- Case for Raspberry Pi 4 Case with Better Cooling System – Large cooling blink fan with LED and 4pcs aluminum heatsinks are better for heat dissipation of Raspberry Pi 4 Model B. Size of fan : 40 x 40 mm.
- Pi 4 Case is Easy Access to All Ports – Raspberry pi 4 case is easy to access the dual micro HDMI port, USB-C power connector port, Audio/Video port, USB and Ethernet ports and micro SD card slot.
- Raspberry Pi 4 Power Supply with ETL Certification – ETL Listed 5V 3A USB-C power supply for Raspberry Pi 4. With on/off switch, it’s convenience to power on and power off your RPI 4. Output: 5V 3A. Cable length: 5ft.
- 100% Customer Satisfaction Guaranteed – If for ANY reason you aren’t completely satisfied with the case, please let us know and we will give you a satisfy solution.
Conclusion
By our suggestions above, we hope that you can found 40mm cooling fan heat sink for you.Please don’t forget to share your experience by comment in this post. Thank you!
