The 8 Best Pastel Liquid Cooling

Mayhems Pastel range of coolants have been in development for over two years, with co-operation between Ice Dragon Cooling and Mayhems. This new range of liquids surpasses anything in the market place at the moment in time, with its outstanding colours and cooling power.

Mayhems new pastel range incorporates many differing technologies into one product, from dyes to nano fluids and of course a little Mayhems magic. With a system working life of about two to three years, of which is due to a design that is intended for prolonged use.

Can be used with all of Mayhems Dyes to make your own colours.

• Blended with Non-Toxic Corrosion & Scale Inhibitors for protection of Copper, Brass, Steel, Nickel and Aluminium Proven to ASTM D3306 and BS6580 standards
• Very low oral toxicity, less than propylene glycol
• -8c freezing point
• Mobilises to prevent scale or sludge filming
• Boiling Point : up to 95° C (pressure dependent)
• Can be stored for up to three years, within in a cool dry environment

The system must be clean and have no chemicals of any kind left in the loop. There must be an absence of bleach, biocide and anti corrosive inhibitors. We recommend you flush your system with Mayhems Blitz Cleaning System before use.

Mayhems Pastel has biocides and inhibitors included within the mixture so do not add any extras except dye.

Warning: Contains Zinc Oxide. Do not dispose of down the drain. This is harmful to the environment. Please dispose of in safe appropriate manner. Store in a cool dry place out of reach of children and animals.

Disclaimer:- Not For Use with Aluminium Radiators Mayhems internal testing has seen severe issues with Aluminium Radiators and as a consequence we do not support the use of any Mayhems Pastel Coolants with these Radiators.

Does not contain ethylene glycol

Model: MPUVW1LTR

Mayhems Pastel range of coolants have been in development for over two years, with co-operation between Ice Dragon Cooling and Mayhems. This new range of liquids surpasses anything in the market place at the moment in time, with its outstanding colours and cooling power.

Mayhems new pastel range incorporates many differing technologies into one product, from dyes to nano fluids and of course a little Mayhems magic. With a system working life of about two to three years, of which is due to a design that is intended for prolonged use.

Can be used with all of Mayhems Dyes to make your own colours.

• Blended with Non-Toxic Corrosion & Scale Inhibitors for protection of Copper, Brass, Steel, Nickel and Aluminium Proven to ASTM D3306 and BS6580 standards
• Very low oral toxicity, less than propylene glycol
• -8c freezing point
• Mobilises to prevent scale or sludge filming
• Boiling Point : up to 95° C (pressure dependent)
• Can be stored for up to three years, within in a cool dry environment

The system must be clean and have no chemicals of any kind left in the loop. There must be an absence of bleach, biocide and anti corrosive inhibitors. We recommend you flush your system with Mayhems Blitz Cleaning System before use.

Mayhems Pastel has biocides and inhibitors included within the mixture so do not add any extras except dye.

Warning: Contains Zinc Oxide. Do not dispose of down the drain. This is harmful to the environment. Please dispose of in safe appropriate manner. Store in a cool dry place out of reach of children and animals.

Disclaimer:- Not For Use with Aluminium Radiators Mayhems internal testing has seen severe issues with Aluminium Radiators and as a consequence we do not support the use of any Mayhems Pastel Coolants with these Radiators.

Does not contain ethylene glycol

Model: MPPI250ML

This wash bottle is used to wash labware and to store washing solutions, such as acetone or deionized water. The LDPE (low-density polyethylene) body is lightweight, flexible, and elastic, has an opaque hue, and resists impact, stress cracks, and moisture absorption. Its Boston round shape is used for applications that require a rounded body, short neck, and narrow mouth to store liquid samples, solvents, and chemicals, and dry materials. The screw closure has its stem and draw tube molded in one piece for leak-proof applications, and its angled dispensing nozzle directs the stream of liquid. The spout can be cut back to increase the flow of washing solution. This bottle is suitable for storing and transporting labware washing solutions. Lab bottles are used to store, hold, and mix liquids, powders, and other substances in a wide variety of scientific industries. Lab bottles have a more pronounced neck and shoulder than jars. Lab bottles are manufactured with a combination of characteristics in order to meet the demands of particular applications, such as for solution dispensing, mixing, and weighing, and use in centrifuge operations. They come in many shapes for specific applications, with a variety of mouth or nozzle shapes and sizes for specific use. Lab bottles are made from materials, such as glass (borosilicate or soda-lime) and an array of plastics, which are selected for chemical and thermal expansion resistance, transparency, and their adaptability in a variety of applications. Lab bottle interiors, caps, and lids are often lined with a protective material. Caps and lids help seal bottles to prevent solutions from spilling. The capacity refers to the fluid amount held by a lab bottle, and is commonly measured in milliliters (mL) and liters (l), and sometimes in ounces (oz). Lab bottles are suitable for use in chemistry and biology applications, as well as in pharmaceutical and scientific testing.

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
Specifications

Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
Instructions
1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated water.
6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
8.Fill loop with your choice of coolant and begin water-cooling.**

** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.

Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
PrimoChill is not responsible for any hardware damage. Use at your own risk.

Alphacool “Eisfluegel”: The flow indicator with added value! Water cooling in a computer always serves as a visual upgrade. Neatly arranged hosing or HardTubes make for an impressive sight. With the Alphacool “Eisfluegel”, you can add in an extra eye-catcher. The silent revolution of the fan wheel will always show the direction of the flow. The combination of acetal and plexiglass is a winning combination which fits seamlessly into any system. Besides the two ¼” screw threads necessary for the water flow, Alphacool “Eisfluegel” also has another screw thread on the upper side which can be used for many purposes: illumination, fill port, drain port, or as an angled piece – functionality is still guaranteed even if the upper thread is used as an outlet. The fan with six blades inside is also made of plexiglass and the outer sides are marked in two different colours, blue and yellow. The side with the greater contrast can be chosen depending on the colour of the fluid. Technical Specifications Materials: acetal, plexiglass, nylon Colours: black, transparent, yellow, blue Dimensions (LxWxH): 44.5 x 32.1 x 48.4 mm Screw threads: 3x G1/4” Scope of Delivery 1x Alphacool “Eisfluegel” 1x G1/4” screw plug

Mayhems non staining dyes reduce or eliminate staining on most hard surfaces, skin, fabrics and equipment that is non-porous, but does not include flexible tubing. These new Mayhems non stain dyes have a wide pH stability scope and can be used in liquid cooled PC’s and Coolants. They should keep their colour longer than any normal high quality dye.

All Mayhems Non Stain dyes can be mixed with each other to create a much wider range of colours. Mayhems non stain dyes can be also be used with Pastel, Aurora. X1, XT1.

Mixing example:

Blue + Yellow = Green

Yellow + Red = Orange

Red + Blue = Purple

Warning

To keep the nonstaining abilty it must be mixed with Ultra Pure H20, Pastel Ice White, X1 clear or XT-1 clear only. Mixing Nonstaining dyes with any premixed coloured coolants will result in a staining product.

Mayhems non stain dyes contain a biocide that is compatible with Mayhems current range of products (X1, XT1, Pastel, Aurora). They have not been tested on any other manufactured fluids.

Model: MDNSY15

Conclusion

By our suggestions above, we hope that you can found pastel liquid cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!