homeoneusa 
Nowadays, there are so many products of nema 17 cooling fan in the market and you are wondering to choose a best one. You have searched for nema 17 cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings nema 17 cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
3D Printer Part TEVO Tarantula Dual Extruder Upgrade Fully Kits Dual Extruder& 3010 12V Cooling Fan with Two Nema 17 Step Motor
SoundOriginal 2pcs 4010 Brushless DC Cooling Fan 12V 0.06~0.15A 40x40x10mm Speed 6800 RPM Fans for Computer case 3D Printer Humidifier and Other Small Appliances Series Repair Replacement
- 2pcs Brushless cooling fan 12vdc 0.06A~0.15A 40mm x 40mm x10mm Speed 6800 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation
- electronic cooling fans and so on—Repair Replacement (2Pack)
- Bearing Type: Dual Ball Bearing, Speed: 6800 RPM, Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- Connector: 2 Terminal Connector with 2pin-ph2.5
- compact motor design, the NF-A4x10’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10’s superior airflow and pressure performance.
- DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.06A~0.15A
- Dimensions: 40x40x10mm (1.6 x 1.6 x 0.36inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball
BNTECHGO 4 Pcs 40mm x 40mm x 11mm Black Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad
- BNTECHGO 4 Pcs 40mm x 40mm x 11mm Black Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad
- Aluminum Heatsink Color:Black
- Silicone Based Thermal Pad:Good Cooling,Easy Installation
- Heat Sink Size:40mm x 40mm x 11mm / 1.57″ x 1.57″ x 0.43″(L*W*H)
- 1 Pcs Heatsink Weight:0.0124KG
- Package Content:4 Pcs 40mm x 40mm x 11mm Black Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad.(Note:Some scratches may be caused in the production process.)
BNTECHGO 4 Pcs 40mm x 40mm x 11mm Black Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad
Anet Aluminium Extruder Heatsink 5PCS, MK7 / MK8 40 x 40 x 11mm Heatsink Cooling Cooler Fin for Anet 3D Printer Extruder Fan
Brand: Anet
Product: Makerbot Heatsink
Use for: Anet 3d printer
Dimensions: 40*40*11mm
Size of holes: 31mm
quantity: 5PCS
Material: aluminum
Advantages:
1. aluminum material, fast heat dissipation.
2. Chip spacing and neat, larger heat dissipation area.
3. Surface oxidation treatment, fast heat dissipation, high hardness, beautiful color.
4. High-quality 3d printer accessoried heat sink, original boutique.
5. Environmental protection, safety, harmless.
6. High-quality raw materials, fine workmanship.
7. Strict quality control system, quality assurance.
Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)
- Premium quiet fan, 40x40x10 mm, 12V, 3-pin Molex, 4500/3700 RPM, max. 17.9 dB(A), >
- 150,000 h MTTF
- Award-winning 40x10mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
- Ideal replacement for noisy or broken 12V 4cm fans in 3D printers, DVRs, NAS, switches, routers, other network and storage devices, etc.
- 3-pin 12V FLX version can be run 4500 or 3700 rpm using the supplied Low-Noise Adaptors to fine-tune the fan for maximum airflow or near-silent operation
- Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and OmniJoin adaptor set for connecting the fan to proprietary fan headers
Easycargo 40mm Heatsink Fan 12V Kit, Cooler Heat Sink + 12V Ball Bearing Fan + Silicon Thermal Tape + Grill Screw Mounting Kit (1)
- 40mm Fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc
- Fan specifications: Ball bearing, speed 6500rpm, airflow 7.93CFM, noise level: 28 dBA, life time: 50000 hours,, start up voltage: 7V DC, working voltage range: 10.8-13.2V DC
- Fan dimension: 40x40x10mm, 12V DC, wire connector 2-pin-2.5mm, wire length: 5.9″/15cm.
- Heatsink dimension: 40x40x11mm, Adhesive silicone pad dimension: 40x40x0.5mm.
- Each pack includes: 1pc 12V DC fan, 1pc heatsink, 1pc silicone pad, 1 metal grill, screw monthing screw nut set.
12V DC cooler fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier. Each pack includes: 1pc 12V DC fan, 1pc heatsink, 1pc silicone pad, 1 metal grill, screw monthing screw nut set. Fan dimension: 40x40x10mm, 12V DC, wire 2-pin-2.5mm connector 5.9″/15cm, speed: 6500rpm, airflow 7.93CFM, noise level: 28 dBA, life time: 50000 hours,, start up voltage: 7V DC, working voltage range: 10.8-13.2V DC.
Similar items with 4 stars and above
Nxtop 12 Pcs Aluminium 40 x 40 x 11mm Square Heatsink Cooling Cooler Fin Black
40mmx40mx11mm Aluminum Square Shape Heat Diffuse Cooling Fin Heatsink. Use heatsink adhesive glue to install heatsink . Please check the specification table and make sure that the size of the heatsink fits that of your component.
BNTECHGO 4 Pcs 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad
- BNTECHGO 4 Pcs 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad
- Aluminum Heatsink Color:Black
- Silicone Based Thermal Pad:Good Cooling,Easy Installation
- Heat Sink Size:40mm x 40mm x 11mm / 1.57″ x 1.57″ x 0.43″(L*W*H)
- 1 Pcs Heatsink Weight:0.0124KG
- Package Content:4 Pcs 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad.(Note:Some scratches may be caused in the production process.)
BNTECHGO 4 Pcs 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad
Altelix Vented NEMA Enclosure 17x14x6 (11.5" x 9" x 3.2" Inside Space) Polycarbonate + ABS Weatherproof with Cooling Fan, Aluminum Equipment Mounting Plate, Pre-Wired 120 VAC Outlets, 5 Ft Power Cord
- Durable Commercial Grade Polycarbonate + ABS NEMA Box with Reinforced Hinges, Dual Latches, Tamper-Proof Locking Screw and Provision for Padlock. IP24 Rated
- Dual 3.5″ Vents and Thermostat Controlled Cooling Fan. NEMA Type 3R, 3RX / IP24.
- Inside Space for Equipment Up to 11.5″ x 9″ x 3.2″ Max. Outside Dimensions: 16.5 x 12.5 x 5.3 Inches.
- Plug-and-Play Enclosure. Includes pre-wired 120 VAC outlets and 5 foot 3-prong power cord.
- Ideal for Protecting Wi-Fi Equipment, Security and Surveillance Equipment, Concealment of Electronic Devices, Industrial Automation, Warehouses, Public Areas and More.
The Altelix NP171406VFA1C Vented Polycarbonate + ABS NEMA Weatherproof Enclosure with 120VAC Power and Aluminum Equipment Plate is ideal for protecting equipment from harsh environments and tampering. This enclosure features a gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. Internal and external electrical ground points are also provided. The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for installation on poles up to 8 inches in diameter.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
This configuration consists of the PC+ABS NEMA enclosure with hinged lid and a 2.5mm thick finished aluminum equipment mounting plate with two pre-wired 120VAC power outlets and a 5 foot USA power cord is included to power the enclosure, so no additional wiring is required. A ground lug is provided on the side of the enclosure. Knock-outs on two sides of the enclosure are provided for additional wiring. Cable grommets are included with the accessory kit.
Cooling Fan Ventilation
The NP171406VFA1C features dual 3.5″ vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use.
Altelix Light Ivory Vented NEMA Enclosure 14x11x5 (9" x 8" x 3.2" Inside Space) Polycarbonate + ABS Weatherproof with Cooling Fan, Pre-Wired 120 VAC Outlets, 5 Foot Power Cord
- Durable Commercial Grade Light Ivory Polycarbonate + ABS NEMA Box with Reinforced Hinges, Dual Latches, Tamper-Proof Locking Screw and Provision for Padlock. IP24 Rated
- Dual 3″ Vents and Thermostat Controlled Cooling Fan. NEMA Type 3R, 3RX / IP24.
- Inside Space for Equipment Up to 9″ x 8″ x 3.2″ Max. Outside Dimensions: 13.4 x 10.4 x 4.7 Inches.
- Plug-and-Play Enclosure. Includes pre-wired 120 VAC outlets and 5 foot USA 3-prong power cord.
- Ideal for Protecting Wi-Fi Equipment, Security and Surveillance Equipment, Concealment of Electronic Devices, Industrial Automation, Home Automation, Sprinkler / Irrigation Timers, Warehouses, Public Areas and More.
The Altelix NP141105TVFA1C Light Ivory Vent Fan Cooled Polycarbonate + ABS NEMA Weatherproof Enclosure with 120VAC Power and Aluminum Equipment Plate is ideal for protecting equipment from harsh environments and tampering. This enclosure features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use.
These enclosures are molded out of Light Ivory UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
Low Visibility Light Ivory Enclosure
The color of this enclosure makes it ideal for deploying surveillance and security equipment as well as WiFi equipment and building automation control equipment which typically requires low visibility. It can easily blend in with interior spaces such as in office complexes as well as outdoor applications.
Cooling Fan Ventilation
The NP141105TVFA1C features dual 3″ vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure.
Power
The NP141105TVFA1C features a 2.0mm thick aluminum plate with two 120VAC power outlets. A 5 foot pre-wired power cord is included to power the enclosure, so no additional wiring is required.
Mounting
The enclosure can be wall mounted using the included wall anchors.
Conclusion
By our suggestions above, we hope that you can found nema 17 cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
