The 10 Best Iron On Reflective Tape For Clothing 3M

Attachment Type: Iron On (heat transfer)
Heat press 140℃ ~ 160℃,dwell time 8~20 second with plane pressure >0.5kg/c㎡ >> Cold Peel​
Daytime Color: Silver
Backing fabric:PET film and hot melt adhesive

Certification:EN ISO 20471, ANSI/ISEA 107-2015
Home Wash Cycles: Up to 50 cycles @60℃ ( 140°F), depends on the condition of substrates and heat transfer operations.
Care instructions: use neutral detergent in hand wash.Do not pre-soaking. hot water wash is allowed around 40℃, Do not use detergent that contains bleach,acid or alkali.
Precautions:
1, this heat transfer film is not suitable for nylons or any other water-repellent substrates.
2, this heat transfer film is not suitable for mesh fabric with holes,heat transfer film on holes without substrates is with low adhesive strength, and easily damaged in the wash process or in daily uses.
3, the lamination temperature, time,speed and pressure listed about shall we used a guide. for each fabric, we recommend that substrates always be tested prior to production, ensure that they meet your specific needs, and to assure adequate adhesion and physical performance.
4, after heating,allow heat transfer film to cool to room temperature,remove the reflective liner by lifting one corner and pulling ( 180°angle) in a continuous,smooth manner.
5, Do not exceed lamination temperatures listed above because the clear polyethylene liner may become difficult to remove and affect the physical performance.
If you find that the vinyl can be tear off, maybe the temperature not high enough.Add heat and repeat the ironing

It is reflective tape strip. Fits for sport gloves, protective clothing, hat, pet clothes and so on. Length: 3m Total width: 5cm Gray strip width: 1.5cm Reflective Tape. Add this tape to articles of clothing and more to make sure that you stand out! Great to wear when out walking or biking in the evening or night.

Attachment Type: Iron On (heat transfer)
Heat press 140℃ ~ 160℃,dwell time 8~20 second with plane pressure >0.5kg/c㎡ >> Cold Peel​
Daytime Color: Silver
Backing fabric:PET film and hot melt adhesive

Certification:EN ISO 20471, ANSI/ISEA 107-2015
Home Wash Cycles: Up to 50 cycles @60℃ ( 140°F), depends on the condition of substrates and heat transfer operations.
Care instructions: use neutral detergent in hand wash.Do not pre-soaking. hot water wash is allowed around 40℃, Do not use detergent that contains bleach,acid or alkali.
Precautions:
1, this heat transfer film is not suitable for nylons or any other water-repellent substrates.
2, this heat transfer film is not suitable for mesh fabric with holes,heat transfer film on holes without substrates is with low adhesive strength, and easily damaged in the wash process or in daily uses.
3, the lamination temperature, time,speed and pressure listed about shall we used a guide. for each fabric, we recommend that substrates always be tested prior to production, ensure that they meet your specific needs, and to assure adequate adhesion and physical performance.
4, after heating,allow heat transfer film to cool to room temperature,remove the reflective liner by lifting one corner and pulling ( 180°angle) in a continuous,smooth manner.
5, Do not exceed lamination temperatures listed above because the clear polyethylene liner may become difficult to remove and affect the physical performance.
If you find that the vinyl can be tear off, maybe the temperature not high enough.Add heat and repeat the ironing

Attachment Type: Iron On (heat transfer)
Heat press 140℃ ~ 160℃,dwell time 8~20 second with plane pressure >0.5kg/c㎡ >> Cold Peel​
Daytime Color: Silver
Backing fabric:PET film and hot melt adhesive

Certification:EN ISO 20471, ANSI/ISEA 107-2015
Home Wash Cycles: Up to 50 cycles @60℃ ( 140°F), depends on the condition of substrates and heat transfer operations.
Care instructions: use neutral detergent in hand wash.Do not pre-soaking. hot water wash is allowed around 40℃, Do not use detergent that contains bleach,acid or alkali.
Precautions:
1, this heat transfer film is not suitable for nylons or any other water-repellent substrates.
2, this heat transfer film is not suitable for mesh fabric with holes,heat transfer film on holes without substrates is with low adhesive strength, and easily damaged in the wash process or in daily uses.
3, the lamination temperature, time,speed and pressure listed about shall we used a guide. for each fabric, we recommend that substrates always be tested prior to production, ensure that they meet your specific needs, and to assure adequate adhesion and physical performance.
4, after heating,allow heat transfer film to cool to room temperature,remove the reflective liner by lifting one corner and pulling ( 180°angle) in a continuous,smooth manner.
5, Do not exceed lamination temperatures listed above because the clear polyethylene liner may become difficult to remove and affect the physical performance.
If you find that the vinyl can be tear off, maybe the temperature not high enough.Add heat and repeat the ironing

Attachment Type: Iron On (heat transfer)
Heat press 140℃ ~ 160℃,dwell time 8~20 second with plane pressure >0.5kg/c㎡ >> Cold Peel​
Daytime Color: Silver
Backing fabric:PET film and hot melt adhesive

Certification:EN ISO 20471, ANSI/ISEA 107-2015
Home Wash Cycles: Up to 50 cycles @60℃ ( 140°F), depends on the condition of substrates and heat transfer operations.
Care instructions: use neutral detergent in hand wash.Do not pre-soaking. hot water wash is allowed around 40℃, Do not use detergent that contains bleach,acid or alkali.
Precautions:
1, this heat transfer film is not suitable for nylons or any other water-repellent substrates.
2, this heat transfer film is not suitable for mesh fabric with holes,heat transfer film on holes without substrates is with low adhesive strength, and easily damaged in the wash process or in daily uses.
3, the lamination temperature, time,speed and pressure listed about shall we used a guide. for each fabric, we recommend that substrates always be tested prior to production, ensure that they meet your specific needs, and to assure adequate adhesion and physical performance.
4, after heating,allow heat transfer film to cool to room temperature,remove the reflective liner by lifting one corner and pulling ( 180°angle) in a continuous,smooth manner.
5, Do not exceed lamination temperatures listed above because the clear polyethylene liner may become difficult to remove and affect the physical performance.
If you find that the vinyl can be tear off, maybe the temperature not high enough.Add heat and repeat the ironing

Lightweights for Clothing & Gear safety reflectors are made from 3M Scotchlite reflective material and is the highest quality retro-reflective money can buy! When light hits this silver material it reflects a brilliant powerful bright light! Lightweights for Clothing & Gear simply stick to fabric, leather, rubber. and most everything else right out of the package. Great for triathletes to trick or treaters for the required reflectivity. They are extremely durable and elastic, lightweight and tissue-thin to flow and stretch effortlessly with even your stretchiest clothing. Easy to follow instructions show you how to obtain iron-on permanence that holds up to hundreds of machine washings on most fabrics. Apply to bags, gloves, boots and backpacks, pet collars, pet leashes, raingear and umbrellas even all your non-stretchy stuff too like your bike and helmet ! This 60 piece Super Bright SilverFlex Reflective Kit: 12 two-inch ovals, 21 one-inch ovals, 15 half-inch circles, 12 quarter-inch circles of SuperBright Reflective can make you and your family feel bright and safe.

HIGH VISIBILITY
Do you or your children enjoy early morning runs or late night bike rides? Keep yourself safe and visible for cars with our retro-reflective sticker strips. Whether you’re 5 or 500 feet away, Brilliant Reflective Strips offer highly visible protection to keep you secure from moving vehicles.

TOP QUALITY
3M Scotchlite Reflective Material is the best, brightest and most durable reflective material in the business, which is why we created our iron-on strips with it. Don’t settle for cheap adhesives or poor reflectors that lose their brightness after a few uses or don’t blend in with your clothes or backpack during the day. Choose Brilliant Reflective and know you’re getting the best.
EASY ADHERENCE
Easy iron-on reflecting for bikes, bags, shoes, boats, water bottles, dog leashes, helmets, hunting stands, ATVs, scooters, trailers, motorcycle helmet, etc. Can be used as a design element of the equipment.
DURABLE
We know you’ll be using our strips during outdoor activities, and they might see a lot of wear, tear, sweat and grime, which is why we made them extra durable. These premium adhesive stickers are machine washable up to 50 washes and are also waterproof for when it rains during your bike ride or you get a little sweaty.
MULTI-USE
Brilliant Reflective Strips are perfect to place on any cloth or fabric, from gym shorts to leather jackets to cloth pet leashes! Place one on your favorite exercise shirt or pants for when you’re running or biking, or slap one on a backpack or your dog’s leash for hiking trips or walks around the neighborhood.
– Brilliant Reflective Reflector Strips
– Made with 3M Scotchlite Refelctive Material
– Removable, Washable and Waterproof
– Visible up to 500 Feet Away
– 30 Sq. Inches / 10 Strips Per Sheet

Attachment Type: Iron On (heat transfer)
Heat press 140℃ ~ 160℃,dwell time 8~20 second with plane pressure >0.5kg/c㎡ >> Cold Peel​
Daytime Color: Silver
Backing fabric:PET film and hot melt adhesive

Certification:EN ISO 20471, ANSI/ISEA 107-2015
Home Wash Cycles: Up to 50 cycles @60℃ ( 140°F), depends on the condition of substrates and heat transfer operations.
Care instructions: use neutral detergent in hand wash.Do not pre-soaking. hot water wash is allowed around 40℃, Do not use detergent that contains bleach,acid or alkali.
Precautions:
1, this heat transfer film is not suitable for nylons or any other water-repellent substrates.
2, this heat transfer film is not suitable for mesh fabric with holes,heat transfer film on holes without substrates is with low adhesive strength, and easily damaged in the wash process or in daily uses.
3, the lamination temperature, time,speed and pressure listed about shall we used a guide. for each fabric, we recommend that substrates always be tested prior to production, ensure that they meet your specific needs, and to assure adequate adhesion and physical performance.
4, after heating,allow heat transfer film to cool to room temperature,remove the reflective liner by lifting one corner and pulling ( 180°angle) in a continuous,smooth manner.
5, Do not exceed lamination temperatures listed above because the clear polyethylene liner may become difficult to remove and affect the physical performance.
If you find that the vinyl can be tear off, maybe the temperature not high enough.Add heat and repeat the ironing

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy iron on reflective tape for clothing 3m, eg:

• What are Top 10 iron on reflective tape for clothing 3m for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 iron on reflective tape for clothing 3m to buy?
• What are Top Rated iron on reflective tape for clothing 3m to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) iron on reflective tape for clothing 3m?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for iron on reflective tape for clothing 3m.
• Before deciding to buy any iron on reflective tape for clothing 3m, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose iron on reflective tape for clothing 3m and What you should consider when buying the iron on reflective tape for clothing 3m and Where to Buy or Purchase the iron on reflective tape for clothing 3m. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 iron on reflective tape for clothing 3m of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about iron on reflective tape for clothing 3m.

Conclusion

By our suggestions above, we hope that you can found iron on reflective tape for clothing 3m for you.Please don’t forget to share your experience by comment in this post. Thank you!