homeoneusa Finding your suitable readers for alfa romeo gt 1.9 jtd parts is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for alfa romeo gt 1.9 jtd parts including detail information and customer reviews. Let’s find out which is your favorite one.
647 reviews analysed
PowerBox CRD2 Diesel Performance Module for Alfa Romeo GT 1.9 JTD 110 KW / 150 PS / 320 NM
Product Overview
Signal Variation Switch
The digital PowerBox CRplus has an Signal Variation Switch with 16 effective settings. The unit can be easily adjusted by using a small screw driver.
When making inquiries or purchases please ALWAYS provide the following information…
PowerBox CRD2 Diesel Performance Module for Alfa Romeo GT 1.9 JTD 110 KW / 150 PS / 305 NM
Product Overview
Signal Variation Switch
The digital PowerBox CRplus has an Signal Variation Switch with 16 effective settings. The unit can be easily adjusted by using a small screw driver.
When making inquiries or purchases please ALWAYS provide the following information…
Plug & Drive Diesel Tuningchip CRD2 PowerBox for Alfa Romeo GT 1.9 JTD 110 KW / 150 PS / 320 NM
Product Overview
Signal Variation Switch
The digital PowerBox CRplus has an Signal Variation Switch with 16 effective settings. The unit can be easily adjusted by using a small screw driver.
When making inquiries or purchases please ALWAYS provide the following information…
Plug & Drive Diesel Tuningchip CRD2 PowerBox for Alfa Romeo GT 1.9 JTD 110 KW / 150 PS / 305 NM
Product Overview
Signal Variation Switch
The digital PowerBox CRplus has an Signal Variation Switch with 16 effective settings. The unit can be easily adjusted by using a small screw driver.
When making inquiries or purchases please ALWAYS provide the following information…
Power Box CRD Performance Diesel Tuningchip for Alfa Romeo GT 1.9 JTD 110 KW / 150 PS / 320 NM
The PowerBox CRD works by modifying the electronic signals that control fuel pressure produced by the pump in order to optimize engine performance. The PowerBox CRD senses and responds to changes in engine load/speed throughout the range of acceleration. With the PowerBox CRD, pressure accumulates faster in the rail and is readily maintained to deliver more power and torque. The result is smooth and responsive acceleration that produce sportier handling. The increased torque produced by the PowerBox enables the engine to operate more efficiently, so fuel consumption is minimized. The PowerBox CRD has been programmed for optimal performance. Despite its potential for power improvement, the PowerBox CRD has been programmed to provide better fuel efficiency.
Product Overview
– For all vehicles with Common Rail Technology
– Greater performance than our standard PowerBox CR
– Improved fuel efficiency
– Includes OEM plugs (no soldering required)
– No increased emissions
– No interference to the Electronic Control Unit (ECU); original settings are not altered
– Will not harm your engine, does not increase injection pressure
– Will not alter engine diagnostics functioning
– Will not interfere with engine error code sensing
– Does not change the service intervals required for your vehicle
– 3-year limited warranty
Signal Variation Switch
The digital PowerBox CRD has a signal variation switch with 16 positions. Using a small screw driver, higher output can be achieved by turning the HEX switch to a higher setting.
Lower Intercooler Turbo Silicone Hose Pipe Fit Alfa Romeo GT 147 156 1.9 JTD 16v 8v
- Made from high quality woven thermoplastic and pure silicone materials to form the highest quality engine hoses and offer longer life expectancy
- Handmade and carefully inspected
- High performance and reliability in high pressures conditions
- Flexible and can handle extreme temperature from -60°C to +260°C or -76°F to + 530°F
- Resistant to UV, water, ozone and oxygen
Thickness: 2mm to 5mm, 3-4-ply Working Temperature: -76°F (-60°C ) to +500°F (+260°C) Working Pressure: 0.3 to 0.9MPa Bursting Pressure: 2MPa Size Tolerance: +/-0.5mm
Alfa Romeo 1.9 JTD 939A200 147 156 159 GT Pierburg Swirl Flap Blank Removal Kit X8R0077
- PRODUCT DESCRIPTION: Our high quality blanking plugs in this listing allow the swirl flaps to be removed and blanked off on the Pierburg intake manifold. Resolving air leaks / vehicles faults and preventing any future swirl flap issues. A cost effective alternative to replacing the complete manifold which with the same flawed design swirl flap mechanism would likely fail again.
- SYMPTOMS OF FAULT: Engine management light (EML) lit, high fuel consumption, rough idling, rough running, poor power and torque, smoking from exhaust, error P2279-11 Intake system air leak,P2075 fault code.
- THE SOLUTION: REMOVE THE SWIRL FLAPS FROM THE INLET MANIFOLD AND BLANK OFF USING OUR KIT
- ELIMINATE SWIRL FLAP FAULTS WITHOUT HAVING TO BUY A COMPLETE NEW INTAKE MANIFOLD. Our unique design kit allows you to blank off the swirl flaps on your original intake manifold resolving swirl flap faults permanently. Our blanks are precision engineered from billet aluminium and are fitted with a Viton O ring to ensure a good seal, a far better alternative to pressed parts which can fail to seal.
- A cost effective alternative to a whole new manifold which would likely fail again. Save the cost of a new manifold and prevent any further swirl flap issues. Some of our customers have installed our blanks as a preventative measure to avoid swirl flap issues further down the line and some customers have experienced performance gains from removing the swirl flaps. PART NUMBERS LISTED BELOW: 55210202, 55210201, 2.03462.03, 2.03462.02
- INSTRUCTIONS: 1. https://youtu.be/eM7Yl3FxmPg 2. http://www.x8r-instructions.co.uk/Pierburg-Intake-Inlet-Manifold-Swirl-Flap-Blank-Blanks-install-instruction-guide-vauxhall-saab-opel-fiat-alfa-romeo-1.9-cdti.pdf
THE PROBLEM: THE BALL JOINTS ON THE SWIRL FLAPS CAN WEAR TO EXCESS RENDERING THE SWIRL FLAPS UN-FUNCTIONAL ALSO THE SEAL ON THE SWIRL FLAPS CAN FAIL CAUSING INLET MANIFOLD AIR LEAKS. It is a very common fault for the swirl flap operating rod bushes to wear down and for the operating rod to pop off causing these symptoms, this can easily be rectified with our replacement improved design operating rod which can be purchased in our eBay store. Unfortunately on occasions the ball joints on the swirl flaps which this rod connects to can be too worn to repair with a new rod, alternatively the seals on the swirl flaps on occasions fail and cause air leaks. Previously this necessitated the replacement of the whole intake manifold at vast expense. However using our blanking kit the swirl flaps can be removed and blanked off allowing you to repair the manifold you have; saving the cost of a new manifold and preventing any future swirl flap issues. ***** INSTRUCTIONS: 1. https://youtu.be/eM7Yl3FxmPg 2. http://www.x8r-instructions.co.uk/Pierburg-Intake-Inlet-Manifold-Swirl-Flap-Blank-Blanks-install-instruction-guide-vauxhall-saab-opel-fiat-alfa-romeo-1.9-cdti.pdf ****** VEHICLES AFFECTED: YOU WILL NEED TO CHECK THE PART NUMBER ON YOUR INTAKE MANIFOLD BEFORE ORDERING AS THERE ARE TWO TYPES OF MANIFOLD. THIS LISTING IS FOR MANIFOLDS WITH THE PART NUMBERS LISTED BELOW: 55210202, 55210201, 2.03462.03, 2.03462.02 ****** YOU WILL RECEIVE: Our repair kit includes: 4X Large cnc machined billet aluminium blanks (fitted with high quality Viton O-ring) 1X Small cnc machined billet aluminium blank (fitted with high quality Viton O-ring) 1X Adhesive to secure the blanks
Alfa Romeo 1.9 JTD Multijet 147 156 159 GT Intake Manifold Swirl Flap Blanks X8R0076
- PRODUCT DESCRIPTION: Our high quality blanking plugs in this listing allow the swirl flaps to be removed and blanked off on the Pierburg intake manifold. Resolving air leaks / vehicles faults and preventing any future swirl flap issues. A cost effective alternative to replacing the complete manifold which with the same flawed design swirl flap mechanism would likely fail again.
- SYMPTOMS OF FAULT: Engine management light (EML) lit, high fuel consumption, rough idling, rough running, poor power and torque, smoking from exhaust, error P2279-11 Intake system air leak,P2075 fault code.
- YOU WILL NEED TO CHECK THE PART NUMBER ON YOUR INTAKE MANIFOLD BEFORE ORDERING AS THERE ARE TWO TYPES OF MANIFOLD. THIS LISTING IS FOR MANIFOLDS WITH THE PART NUMBERS LISTED BELOW: 55206459, 55190238, 55194739, 55206460, 2.03462.01, 2.03462.00W. WE OFFER A BLANKING KIT FOR THE OTHER TYPE OF MANIFOLD IN OUR SHOP.
- THE BALL JOINTS ON THE SWIRL FLAPS CAN WEAR TO EXCESS RENDERING THE SWIRL FLAPS UN-FUNCTIONAL ALSO THE SEAL ON THE SWIRL FLAPS CAN FAIL CAUSING INLET MANIFOLD AIR LEAKS. It is a very common fault for the swirl flap operating rod bushes to wear down and for the operating rod to pop off causing these symptoms, this can easily be rectified with our replacement improved design operating rod which can be purchased in our eBay store.
- INSTRUCTION: 1) https://youtu.be/eM7Yl3FxmPg 2) http://www.x8r-instructions.co.uk/Pierburg-Intake-Inlet-Manifold-Swirl-Flap-Blank-Blanks-install-instruction-guide-vauxhall-saab-opel-fiat-alfa-romeo-1.9-cdti.pdf
THE PROBLEM: ***** THE BALL JOINTS ON THE SWIRL FLAPS CAN WEAR TO EXCESS RENDERING THE SWIRL FLAPS UN-FUNCTIONAL ALSO THE SEAL ON THE SWIRL FLAPS CAN FAIL CAUSING INLET MANIFOLD AIR LEAKS. It is a very common fault for the swirl flap operating rod bushes to wear down and for the operating rod to pop off causing these symptoms, this can easily be rectified with our replacement improved design operating rod which can be purchased in our eBay store. Unfortunately on occasions the ball joints on the swirl flaps which this rod connects to can be too worn to repair with a new rod, alternatively the seals on the swirl flaps on occasions fail and cause air leaks. Previously this necessitated the replacement of the whole intake manifold at vast expense. However using our blanking kit the swirl flaps can be removed and blanked off allowing you to repair the manifold you have; saving the cost of a new manifold and preventing any future swirl flap issues. ***** THE SOLUTION: REMOVE THE SWIRL FLAPS FROM THE INLET MANIFOLD AND BLANK OFF USING OUR KIT; ELIMINATE SWIRL FLAP FAULTS WITHOUT HAVING TO BUY A COMPLETE NEW INTAKE MANIFOLD. Our unique design kit allows you to blank off the swirl flaps on your original intake manifold resolving swirl flap faults permanently. Our blanks are precision engineered from billet aluminium and are fitted with a Viton O ring to ensure a good seal, a far better alternative to pressed parts which can fail to seal. A cost effective alternative to a whole new manifold which would likely fail again. Save the cost of a new manifold and prevent any further swirl flap issues. Some of our customers have installed our blanks as a preventative measure to avoid swirl flap issues further down the line and some customers have experienced performance gains from removing the swirl flaps.
yise-G538 New MAF Mass Air Flow Meter Sensor For Alfa Romeo 147 GT Fiat Multipla Stilo Multi Wagon 115 1.9 JTD JTS 0280218120 46811122
- One year warranty. We test each item and 100% ensure that before we ship, if there is any dissatisfaction, please contact us. Professional manufacture, high precision, durable. We are a factory specializing in auto parts, direct sales, wholesale acceptance.If you have any questions, you can ask us.We will reply to your message within 3-8 hours.Our products will also be carefully checked before shipment to make sure there is no problem before shipment.
Notice:
Please confirm part number on your old part before order.
YEAR:
2002 2003 2004 2005 2006 2007 2008 2009 2010
Applications:
For Alfa Romeo
147 Hatchback 1.9 JTD 101HP 74KW 2003-2010
147 Hatchback 1.9 JTD 115HP 85KW 2001-2010
147 Hatchback 1.9 JTD 16V 126HP 93KW 2003-2004
147 Hatchback 1.9 JTD 16V 136HP 100KW 2004-2010
147 Hatchback 1.9 JTD 16V 140HP 103KW 2002-2010
GT Coupe 1.9 JTD 150HP 110KW 2003-2010
GT Coupe 2.0 JTS 1970ccm 162HP 119KW (Petrol) 2006-2010
GT Coupe 2.0 JTS 1970ccm 165HP 121KW (Petrol) 2003-2010
For Fiat Multipla
MPV 1.9 JTD 115 115HP 85KW 2002-2010
For Fiat Stilo
Hatchback 1.9 JTD 115HP 85KW 2001-2006
Hatchback 1.9 JTD 140HP 103KW 2005
Hatchback 1.9 JTD 140HP 103KW 2004
Hatchback 1.9 JTD 140HP 103KW 2006
Hatchback 1.9 JTD 80HP 59KW 2002-2006
Hatchback 1.9 JTD 90HP 66KW 2004
Hatchback 1.9 JTD 90HP 66KW 2006
Hatchback 1.9 JTD 90HP 66KW 2005
Multi Estate 1.9 JTD 115HP 85KW 2003-2008
Multi Estate 1.9 JTD 140HP 103KW 2006
Multi Estate 1.9 JTD 140HP 103KW 2005
Multi Estate 1.9 JTD 140HP 103KW 2004
Multi Estate 1.9 JTD 140HP 103KW 2008
Multi Estate 1.9 JTD 140HP 103KW 2007
Multi Estate 1.9 JTD 80HP 59KW 2008
Multi Estate 1.9 JTD 80HP 59KW 2007
Multi Estate 1.9 JTD 80HP 59KW 2006
Multi Estate 1.9 JTD 80HP 59KW 2003
Multi Estate 1.9 JTD 80HP 59KW 2005
Multi Estate 1.9 JTD 80HP 59KW 2004
AL150R SHAFTEC DRIVESHAFT(REMAN) OE QUALITY
This part fits the following models:
- Alfa Romeo GT Coupe 1.9 JTD (2003 – 2010) 110kW
- Alfa Romeo 147 Hatchback 1.9 JTDM 16V (2000 – 2010) 110kW
- Alfa Romeo GT Coupe 1.9 JTD (2003 – 2010) 125kW
- Alfa Romeo 147 Hatchback 1.9 JTD (2000 – 2010) 85kW
- Alfa Romeo 147 Hatchback 1.9 JTDM 8V (2000 – 2010) 88kW
- Alfa Romeo 147 Hatchback 1.9 JTDM 16V (2000 – 2010) 125kW
- Alfa Romeo 147 Hatchback 1.9 JTD 16V (2000 – 2010) 103kW
- Alfa Romeo 147 Hatchback 1.9 JTD 16V (2000 – 2010) 100kW
- Alfa Romeo 147 Hatchback 1.9 JTD 16V (2000 – 2010) 93kW
- Alfa Romeo 147 Hatchback 1.9 JTDM (2000 – 2010) 85kW
This list is a sample of all the compatible cars for this part.
Make sure this product fits your car by using the part finder above.
Equivalent Part Numbers:
ALFA ROMEO 46307654; ALFA ROMEO 46307346; ALFA ROMEO 46308072; ALFA ROMEO 71720884; ALFA ROMEO 46308024; ALFA ROMEO 71783011; SNRA A1443; CEVAM 5096; RCA FRANCE AL910N; AMK DS5006; ODM-MULTIPARTS 18-352070; ERA Benelux DA51236; ERA Benelux DA51204; IPD 33-2145; GENERAL RICAMBI AR3102; GENERAL RICAMBI AR3098; GENERAL RICAMBI AR3118; CIFAM 655-911; METELLI 17-0911; EAI T58366; GSP 210218
Conclusion
By our suggestions above, we hope that you can found Alfa Romeo Gt 19 Jtd Parts for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Alfa Romeo Gt 19 Jtd Parts, eg:
- What are Top 10 Alfa Romeo Gt 19 Jtd Parts for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Alfa Romeo Gt 19 Jtd Parts to buy?
- What are Top Rated Alfa Romeo Gt 19 Jtd Parts to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Alfa Romeo Gt 19 Jtd Parts?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Alfa Romeo Gt 19 Jtd Parts.
- Before deciding to buy any Alfa Romeo Gt 19 Jtd Parts, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Alfa Romeo Gt 19 Jtd Parts and What you should consider when buying the Alfa Romeo Gt 19 Jtd Parts and Where to Buy or Purchase the Alfa Romeo Gt 19 Jtd Parts. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Alfa Romeo Gt 19 Jtd Parts of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Alfa Romeo Gt 19 Jtd Parts.
