homeoneusa 
Nowadays, there are so many products of trolling motor cooling in the market and you are wondering to choose a best one. You have searched for trolling motor cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings trolling motor cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
T-H Marine GFEL-MKS-BK-DP G-Force Eliminator Trolling Motor Prop Nut – MinnKota 35-70 Models, Black
Designed to lessen prop noise and vibration, The Eliminator Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
T-H Marine GFEL-MK-BK-DP G-Force Eliminator Trolling Motor Prop Nut, MinnKota 80, 101 and 112 – Black
Designed to lessen prop noise and vibration, The Eliminator Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
BSTOOL Outboard Motor 3.5 HP 2-Stroke Fishing Boat Short Shaft Engine Inflatable Boat Water-Cooling CDI System US Stock
- About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon
- The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it . Customer who has high expectations on speed, please be noticed
- It can be marched with inflatable boats, rubber boats or fishing boats
- Necessary: you have to prepare a boat-motor stand or Hanging board on your boat
- Two strokes 3.5 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn’t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear before use !!!
About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
STRICTLY FOR PROFESSIONAL USE ONLY
Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don’t supply wearing parts (pull starter)for free.
If you want buy one please contact us
Specification:
Short Shaft:40cm
Overall length:92CM
Overall wideth:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
Maximum output:2.5kw(3.5HP)
Speed:10km/h
Type:2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 25:1 （Please be suject to this version, and disregard the manual about this point）
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
HYYKJ Outboard Motor Boat Engine, 3.5/3.6/4/6/6.5/7 HP 2/4 Stroke Outboard Motor Marine Inflatable Fishing Boat Engine with CDI Water Air Cooling System
- 【3.5HP 2 STROKE OUTBOARD MOTOR】Water Cooling Technology To Improve The Reliability Of The Whole Machine. Features 360 degree steering rotation for reverse without gear shifting 【Convenient Use and Easy Operation】Travel Safer, More Reliable, More Corrosion Resistant, More Beautiful, More Durable, More Energy Efficient, More Environmentally Friendly.
- 【HIGH PERFORMANCE】Start-In-Gear protection/clutch feature prohibits prop rotation while idling. Easy pull off engine cover with push button latch for instant motor access. Compact design, large tank capacity, fuel saving, strong horsepower, superior performance, environmental protection, durable.
- 【MAIN PARAMETER 1】Overall length: 92cm / 36.2”
- Overall widteh: 36.5cm / 14.4”
- Overall height: 22cm / 8.7”
- Transom height: 42cm / 16.5”
- Full throttle perating range: 4000-5000r/min
- Maximum output: 2.5kw (3.5HP)
- Speed: 12km/h(four people)
- Type: 2-stroke
- Short shaft : 40cm / 15.7”
- Ignition system: CDI system.
- 【MAIN PARAMETER 2】Starting system: Manual start
- Staring carburetion system: Choke start
- Propeller mark: 7-1/45-A(inch)
- The engine and the propeller ratio: 2:1
- Recommended fuel: Regular unleaded gasoline
- Fuel to oil ratio: 35:1
- Gear ratio: 27/13
- Package size: 96cm x 43cm x 30cm (37.8” x 16.9” x 11.8”)
- Package weight: 11.9kg / 26.2lbs.
- 【WIDE APPLICATION】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Superior,quick start,positions the motor at several angles.
Outboard Motor, 2 Stroke 3.5HP Heavy Duty Outboard Motor 2.5KW Inflatable Fishing Boat Engine with Air Cooling CDI System (US Stock)
- ★ 【3.5HP 2 Stroke Outboard Motor】– The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.
- ★【About The Noise】– All the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.
- ★【STRICTLY FOR PROFESSIONAL USE ONLY】– Two strokes 3.5 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode.
- ★【Necessary】– You have to prepare a boat-motor stand or Hanging board on your boat.It can be marched with inflatable boats, rubber boats or fishing boats.
- ★ 【Purchase with Confidence】– Our products are sent from the US and can be delivered quickly. If you want to buy or have other questions, please contact us. DNYSYSJ Customer department will reply your information within 24 hours.
▶ Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn’t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear before use !!!
☀ About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
★ STRICTLY FOR PROFESSIONAL USE ONLY
☞ Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don’t supply wearing parts (pull starter)for free.
If you want buy one please contact us.
★ Specification:
Short Shaft:40cm
Overall length:92CM
Overall wideth:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
Maximum output:2.5kw(3.5HP)
Speed:10km/h
Type:2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 25:1 （Please be suject to this version, and disregard the manual about this point）
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
T-H Marine GFEL-MK-BU-DP G-Force Eliminator Trolling Motor Prop Nut, MinnKota 80, 101 and 112 – Blue
Designed to lessen prop noise and vibration, The Eliminator Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
BoTaiDaHong 3.5HP 2 Stroke Heavy Duty Outboard Motor Boat Engine Inflatable Fishing w/Air Cooling Boat Engine Air Cooling System
- 【Description】Overall length:92CM Overall wideth:36.5cm Overall height:22cm Transom height:42cm Short Shaft:40cm Full throttle perating range:4000-5000r/min Maximum output:2.5kw(3.5HP) Speed:10km/h Type:2-stroke Ignition system: CDI system
- 【Specification】The engine and the propeller ratio:2:1 Recommended fuel: Regular unleaded gasoline Fuel to oil ratio: 25:1 （Please be suject to this version, and disregard the manual about this point） Gear ratio: 27/13 Maximum speed: 10 km / h Built-in fuel tank: 1.3L Fuel consumption per hour: 1.5L
- 【About certification】We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
- 【NOTE】Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn’t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear before use !!!
- 【Shipment】We ship directly from the US warehouse.about 5-7 business days to delivery. We have a Professional Customer Service Team to Reply You within 24 hours.If you have any questions or concerns, Feel free to contact us!We will always stand behind our products and will provide the best suitable solutions for you
About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
Pay Attention:
1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.
2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.
3.It can be marched with inflatable boats, rubber boats or fishing boats.
4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.
Two strokes 3.5 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
STRICTLY FOR PROFESSIONAL USE ONLY
Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don’t supply wearing parts (pull starter)for free.
If you want buy one please contact us
Description:
Overall length:92CM
Overall wideth:36.5cm
Overall height:22cm
Transom height:42cm
Short Shaft:40cm
Full throttle perating range:4000-5000r/min
Maximum output:2.5kw(3.5HP)
Speed:10km/h
Type:2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 25:1 （Please be suject to this version, and disregard the manual about this point）
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
Outboard Motors,3.5HP 2Stroke Outboard Shaft Boat Engine Motor,Inflatable Fishing Boat Air Cooling Trolling Motors,Fishing Watercraft & Trolling Motors 2 Year Warranty
- ☀ About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon
- ☀ The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it
- ☀ It can be marched with inflatable boats, rubber boats or fishing boats
- ☀ Necessary: you have to prepare a boat-motor stand or Hanging board on your boat
- ☀ Two strokes 3.5 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn’t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear before use !!!
About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
STRICTLY FOR PROFESSIONAL USE ONLY
Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don’t supply wearing parts (pull starter)for free.
Specification:
Short Shaft:40cm
Overall length:92CM
Overall wideth:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
Maximum output:2.5kw(3.5HP)
Speed:10km/h
Type:2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 25:1 （Please be suject to this version, and disregard the manual about this point）
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
Outboard Motor, 3.5HP 2 Stroke Inflatable Heavy Duty Fishing Boat Engine Short Shaft CDI Air Cooling System(USA Stock)
- ★【2 Stroke, 3.5 HP】Air Cooling Technology To Improve The Reliability Of The Whole Machine.
- ★【Universal Motors, High Performance, Reliable Quality】Using 3.5HP 2 Stroke,Strong power High quality, Comparable Lubricating System For 2 Stroke Outboard Engine and Vehicle Lubricating System.
- ★【Compact Design, Fuel Saving, Large Tank Capacity】Fuel saving,strong horsepower,superior performance,environmental protection,durable.
- ★【Convenient Use, Easy Operation and Convenient Maintenance】More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly Modeling Luxury and Performance More Superior,Curable, Easy Maintenance. The Utility Model Has The Advantages Of Convenient Use,Easy Operation And Convenient Maintenance.
- ★【Two Year Warranty Covers the Motor, to Provide Parts Free】Universal motors, high performance, reliable quality. Economical and compact structure. Durable, lightweight and anti-corrosive construction. Perfect match inflatable boats, fishing boats, sailboats, and small yachts.
Please Note:
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn’t with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear before use !!!
Pay Attention:
1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.
2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.
3.It can be marched with inflatable boats, rubber boats or fishing boats.
4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.
Two strokes 3.5 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
Description:
Short Shaft:40cm
Overall length:92CM
Overall wideth:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
Maximum output:2.5kw(3.5HP)
Speed:10km/h
Type:2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 25:1 （Please be suject to this version, and disregard the manual about this point）
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
Outboard Trolling Motor, 4HP 4Stroke 52CC Inflatable Shaft Fishing Boat Engine Propeller, CDI Control Air Cooling System Heavy Duty Tiller Shaft
- 【NOTICE】Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).
- 【4.0 HP 4 Stroke Outboard Motor Boat Engine】Using 4 stroke 4 horsepower, Air Cooling Technology To Improve The Reliability Of The Whole Machine.
- 【About the noise】All the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.
- 【Lightweight】The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it. Customer who has high expectations on speed, please be noticed.
- 【High Performance, Travel Safer】Superior engine air cooling system for improved engine performance. Durable, lightweight and anti-corrosive construction, suitable for freshwater and saltwater.
MONIPA Outboard Trolling Motor, 4HP 4Stroke 52CC Inflatable Shaft Fishing Boat
Specification
Type: 4 stroke 4 horsepower
Capacity: 52cc
Transmission ratio: 2.08 (27:13)
The number of cylinders: 1
Maximum speed: 4000-5000
Maximum power: 2.8 kW /4 HP
Shift position: clutch control
Package volume: 95x40x30 cm
Ignition system: CDI
Cooling system: air cooling
Starting method: Manual start
Refueling: No. 93 gasoline
Propeller size: 7 1/4X7-A
Short shaft: 40cm
The maximum fuel consumption: 1.4 liters / hour
Recommended Lubricant:4 stroke lubricating oil
Mixing ratio:Pure gasoline
Trim and tilt system: Manual Tilt
Start-In-Gear protection/clutch feature prohibits prop rotation while idling convenience
Features 360 degree steering rotation for reverse without gear shifting
Cooling system: air cooling
Easy pull off engine cover with push button latch for instant motor access
Must Read before use!
Firstly, Fill the gear oil (open gear box lid and fill it).
Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.
Thirdly,Fill engine oil don’t exceed the head of the pattern.
Forthly,turn the throttle to the start up and turn the accelerator gets up to 50%.
Then,Rapidly pull the starter line.
After the motor start ,please turn the throttle to running state.
Then, it can be operated now.
Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Don’t do the following will avoid cylinder Scoring:
1.start the motor on bank
2.use the motor when it stop coming out of water
Even if you want test the motor, it should be done in the river!
Conclusion
By our suggestions above, we hope that you can found trolling motor cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
