CX800.1 Mono Amplifier

This CX-Series Mono Amp is now one-ohm stable, giving you even more power and wiring options for your system! Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system.

CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary.

Feature Hightlights:
Efficient Class-D amplifier
Three-second turn-on/off delay to eliminate unwanted interference
Variable 12dB crossovers provides control to dial in perfect sound
KickEQ 6dB variable bass boost for those additional low frequencies
24dB subsonic filter for protection from potentially damaging frequencies
FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Accepts up to 40-volt input signal
Small footprint for easier installation
Compatible with CXARC (link to remote) Remote Bass Control
Vertical mounting hardware included for another unique look

Specifications:
Power (watts/ch) 4 Ohm – 300×1
Power (watts/ch) 2 Ohm – 600×1
Power (watts/ch) 1 Ohm – 800×1
CXRC Remote Bass Capable (sold sep.) – yes
Dimensions (in, cm): Height: 2-3/8, 5.9; Width: 6-3/4, 17; Length: 8-1/8, 20.6
Frequency Response (Hz): 25-200, +0/-1dB
Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level)
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
Subsonic Filter: 25Hz @24dB/octave
KickEQ Boost Variable 0-6dB @40Hz

Audio Pipe Apcl30001D 3000 Watt Monoblock Car Amplifier

Product Description

– Maximum Power Output 2 x 2000W – Bridgeable RMS Power @ 4 Ohms: 1x4000W – 2 Channel Bridgeable MOSFET Amplifier – Frequency Response 20 Hz-50kHz (±3dB) – Output Power @ 14.4v DC, 50Hz – 2 Ohm Stable – MOSFET Power Supply – PWM ( Pulse-Width-Modulation ) System – Glass Epoxy PCB – Silver RCA Inputs – Custom Terminal Block for Speaker Connection – Thermal / Overload / Short Circuit Protection – Input Impedance: 47K Ohms – Soft Turn On/ Off – Advanced Protection Circuitry – S/N Ratio: >90dB – Dimensions:10.24″W x 2.21″H x 16.14″L

From the Manufacturer

Advanced Protection Circuitry view larger

Power Series Amplifiers view larger

System Application Diagram view larger

The Strong and not so Silent Type

Custom Terminal Block for Speaker Connections view larger

Power Amplifiers

The Pyle Power Series Amplifiers will provide your audio setup with a powerful new sound. Add performance and quality enhancement to your music when you upgrade your audio system with these rugged and high-efficiency amps. Enjoy tomorrow’s advanced sound technology that outperforms all other amps in its class.

This lineup of Pyle Power amps raises the bar when it comes to true sound quality. Get that sound you’ve been looking for with crisp music reproduction for any mobile audio environment.

Sound Specialization

These high-efficiency amplifiers host impressive power output wattage and are where form and function meet. Enjoy sound and performance enhancing features like Ohm specific stability, Mosfet power supply, PWM (Pulse-Width-Modulation) System, Glass Epoxy PCB, silver RCA inputs, custom terminal blocks for speaker connections, strong frequency response, and input impedance rates along with plenty more features that make the Pyle Power Series Amplifiers stronger than the competition.

Intelligent Design

Safety features include power and protection LED indicator; soft turn-on/off, thermal, overload and speaker-short protection. LED Indicator shows when the amplifier is powered up normally and when your system is experiencing a protection fault.

Pump it Up

Take advantage of the Bass EQ Boost and turn it up. Make adjustments to the Bass EQ settings until you achieve that extra amount of kick you’ve been waiting for.

Strong Sound – Powerful Style

The jet-black design leaves a clean finish on the fortified aluminum heat-sink. The stream-lined and high-tech appearance will definitely add some muscle to your audio.

Total Audio Control

Once you’re connected, customize and adjust your listening experience to your liking with the amplifier’s control center. You can personalize and fine-tune settings like:

• Level (Gain) Control – These are basically volume controls. This will allow you to adjust the incoming signal to the amplifier so that it works well with your headunit or to match the level of other amplifiers in your system.
• Phase – Allows you to change the relative time that the waveform meets your ear. With standard subwoofer installations where the subwoofer is behind you, the phase should generally be at O. When subwoofers or woofers are in the kick panels or door panels, an adjustment is useful in delaying the timing of the wave meeting your ear.
• High-Pass Filter – The High Pass crossover is used for sending midrange and high frequency information to a particular speaker. Activate the High Pass crossover if you intend to drive satellite or coaxial speakers in the system along with subwoofers driven by the amplifier’s channels. Even if your system does not include subwoofers, it may be helpful to activate the High Pass with smaller speakers to protect them from low frequency information to achieve better sound.
• Low-Pass Filter – Filters high frequencies out of the music and improves efficiency and sound quality by allowing only the low frequencies to pass to the subwoofer. Sends only low frequency information to particular speakers. Low Pass crossover activation is usually desired if you intend to power subwoofers.
• Bass EQ – Variable from a range of decibel adjustments, this feature regulates the impact of your bass kick. You’ll have manual control over balancing and correcting the frequency range of a given sound.
• Crossover Switch – Basically acts as a filter and limits selected frequencies going to a subwoofer, which gradually reduce frequency signal strength. Routes output of the Low Pass or the output of the High Pass filters, or ‘Full’ to the power amplifier.

*Please refer to table below for amplifier specific information and adjustment options.

Speaker Output Connections

Connect right and left speaker wire to corresponding speaker output terminals. Be sure to correctly connect the selected speaker wires to their respected speaker terminal, this includes both positive and negative wiring. Improper installation/wiring will result in the speaker cones to move out of phase which can cause bass cancellation.

Input Connections

These amplifiers have inputs for Low Level input connections. The Low Level signal is carried through RCA connection cables.

Additional Features

• Maximum Power Output 2 x 2000W
• Bridgeable RMS Power @ 4 Ohms: 1x4000W
• 2 Channel Bridgeable MOSFET Amplifier
• Frequency Response 20 Hz-50kHz (±3dB)
• Output Power @ 14.4v DC, 50Hz
• 2 Ohm Stable
• MOSFET Power Supply
• PWM ( Pulse-Width-Modulation ) System
• Glass Epoxy PCB
• Silver RCA Inputs
• Custom Terminal Block for Speaker Connection
• Thermal / Overload / Short Circuit Protection
• Input Impedance: 47K Ohms
• Soft Turn On/ Off
• Advanced Protection Circuitry
• S/N Ratio: >90dB
• Dimensions: 10.24”W x 2.21”H x 16.14”L

Which Pyle Power Series Amplifier is Right For You?

	PLA2378	PLA2678 Currently Viewing	PLA2978	PLA4278	PLA4478	PLA1800	PLA3100D	PLA4600D
Channels	2	2	2	4	4	1	1	1
Watt Power Output @ 4 Ohms	2 x 1000	2 x 2000	2 x 2500	4 x 500	4 x 1000	1 x 300	1 x 900	1 x 1200
Watt Power Output @ 2 Ohms	–	–	–	–	–	1 x 500	1 x 1200	1 x 1800
Watt Power Output @ 1 Ohms	–	–	–	–	–	1 x 700	1 x 1600	1 x 2400
Bridged @ 4 Ohms	1 x 2000	1 x 4000	1 x 5000	2 x 1000	2 x 2000	–	–	–
Maximum Output Watt Power	2000	4000	5000	2000	4000	2400	3100	4600
Low Pass Cross Frequency	40Hz – 300Hz	40Hz – 300Hz	40Hz – 300Hz	60Hz – 200Hz	60Hz – 200Hz	40Hz – 300Hz	40Hz – 150Hz	40Hz – 150Hz
High Pass Cross Frequency	40Hz – 300Hz	40Hz – 300Hz	40Hz – 300Hz	15Hz – 250Hz	15Hz – 250Hz	–	–	–
Subsonic Filter	–	–	–	–	–	10Hz – 40 Hz	15Hz – 55Hz	15Hz – 55Hz
Fuse Size	2 x 15A	2 x 40A	4 x 30A	2 x 25A	2 x 40A	2 x 30A	4 x 25A	4 x 30A

The first view of the Boss RIOT Series amplifiers may deceive you. The elegant lines of the R1100M are a textbook exercise in minimalist design. But appearances can be deceiving; the beauty of its design masks the raw power, and reproductive clarity this amplifier produces for your auditory pleasure. This beauty performs like a beast, delivering the clean, powerful, sound you demand from your car stereo.

Features: Remote Subwoofer Level Control Blue Illuminated BOSS Logo Dimensions – 10-7/16 W x 2-1/4 H x 9-1/8 L

XR401-4 eXcelon 400-Watt 4-Channel Amplifier Rich and Immersive High-Resolution Audio High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies immerse yourself in a rich and high-quality sonic experience. High Performance Parts Special capacitors and inductors have been carefully selected for the digital amplifiers LC filter which is essential for achieving high-resolution audio. These high-performance parts reduce noise and distortion and ensure excellent sound quality. Deep Bass Sound By using a down-firing subwoofer and superior technologies the audio system generates high-quality sound and powerful bass while still being compact. Enhanced Signal to Noise Ratio The feedback value of the current XR Amplifier has been optimized to improve the S/N ratio. As a result the noise level has been reduced by up to 40%. Specialized Noise Circuit The noise reduction system employs a special layout that separates the analog circuit digital amplifier circuit and power supply circuit. This keeps interference between the circuits to a minimum decreasing noise and thereby achieving high performance and sound quality. Wired Remote Control The wired remote control allows you to adjust the volume of a subwoofer when connected to the head unit. Features: Operating Voltage: 14.4V (11 – 16 V allowable) Current Consumption: 37 A Dimensions (W x H x D): 220 x 35 x 169 mm (8-11/16 x 1-3/8 x 6-5/8) Weight: 1.5 kg (3.3 lbs) Warranty: 2-Year What’s in the Box: One XR401-4 amplifier Mounting hardware Owner’s manual Specifications: CEA-2006 Standard 75 W x 4: RMS Watts per channel @ 4 ohms 1% THD+N 76 dBA: Signal to Noise Ratio (Reference: 1 Watt into 4 ohms) Max Power Output: – Rated Power Output: 14.4 V 75 W x 4: (4?) (20 Hz – 20 kHz 1.0% THD) 100 W x 4

hifonics car amp

Bbox 12-Inch Single-Sealed Truck Enclosure
(W) 20.00″ x (H)15.25″ x (TOP DEPTH) 5.00″ (BOTTOM DEPTH) 8.37″
Gross Cu. Ft. .80 Speaker hole cutout 11.12″
Speaker face is .75″ Body is 5/8″
Extra large Terminals cups
Wire will be needed to run from the speaker to the terminal cup tabs
IMPORTANT:Confirm the required speaker hole cutout is no more than 11.12″.
MOUNTING DEPTH 6.00″ MIDDLE / 5.00″ TOP OF SPEAKER HOLE / 7.00″ BOTTOM

Lanzar Model : VCT2610

6000 Watt 2 Channel High Power MOSFET Amplifier

The Lanzar 6000 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CDs and recordings.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dimension 1969 Alfa Romeo Milano, eg:

• What are Top 10 Dimension 1969 Alfa Romeo Milano for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dimension 1969 Alfa Romeo Milano to buy?
• What are Top Rated Dimension 1969 Alfa Romeo Milano to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dimension 1969 Alfa Romeo Milano?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dimension 1969 Alfa Romeo Milano.
• Before deciding to buy any Dimension 1969 Alfa Romeo Milano, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dimension 1969 Alfa Romeo Milano and What you should consider when buying the Dimension 1969 Alfa Romeo Milano and Where to Buy or Purchase the Dimension 1969 Alfa Romeo Milano. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dimension 1969 Alfa Romeo Milano of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dimension 1969 Alfa Romeo Milano.