homeoneusa 
Nowadays, there are so many products of castle cooling fan in the market and you are wondering to choose a best one. You have searched for castle cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings castle cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Hobbywing Ezrun 5V C4 Cooling Fan & 44 x 65mm Motor Heat Sink System RC Motor Fan For 1/8 Car#86080130 Blue,Get funshobby decal
Specification:
-Fan input voltage: 5V, 4-5 Ni-Mh/NiCd or 2S Lipo
-Heat sink inner diameter: 44mm
-Heat sink length: 60mm
-Cooling Fan Size: 48mm(L) * 48mm(W) * 16mm(H)
-Suit for 4465 motors
Hot Racing ESC303F01 Cooling Fan for The Castle Sidewinder and Axial AE2 ESC
- Made by Hot Racing
- Hot Racing is a United States based company
- parts are sourced from Chinese producers
- All Hot Racing upgrade parts are direct replacements for stock components
- additional parts are not required
- Hot Racing part number ESC303F01
- UPC 083745713039
- This item works with: Associated RC-10 B4.x, RC-10 T4.x, SC-10 2WD, SC-10 4×4
- Axial AX-10 Deadbolt, AX-10 Ridgecrest Crawler, EXO 4WD Terra Buggy Kit, SCX-10 II, SCX-10 Scale Truck, Wraith 4WD Rock Racer RTR, XR10 Crawler
- HPI Electric Blitz
- Losi 1:10 Strike, 1:10 TEN-T Nitro Truggy RTR, 1:10 TLR 22 2WD Buggy
- Traxxas Rustler VXL Velineon Brushless, Rustler XL-5, Slash 2WD all versions, Slash 4×4 all versions, Stampede 4×4 VXL, Stampede Electric, Stampede VXL, Stampede XL-5
Hot Racing cooling fan for the Castle Sidewinder SV3, SV2, and SCT; and Axial AE2 electronic speed controlsFEATURES: – Keeps your SV3, SV2, SCT or Axial AE-2 running cooler- Simple installationYOU WILL RECEIVE: – One (1) cooling fan- Mounting brackets- Mounting hardwareREQUIREMENTS: – Installation onto speed controller- Spare receiver port for power supply- Recommended to use a removable-type locking adhesive on screws threading into metalSPECIFICATIONS: – Size: 30x30x7.5mm- Mounting hole pattern: 24mm square- Input voltage: DC 7.2-8.4V MAXCOMMENTS: – Speed controller is not included and is shown for demonstration only- Fits the Castle Sidewinder SV3, SV2, and SCT ESCs- Fits the Axial AE2 ESCdescription revised by: SN May 27, 2015
DEEPCOOL Castle 240EX, Addressable RGB AIO Liquid CPU Cooler, Anti-Leak Technology Inside, Cable Controller and 5V ADD RGB 3-Pin Motherboard Control, TR4/AM4 Supported, 3-Year Warranty
- Anti-leak Tech inside, exclusively safe.
- 25% more skived fins on the back side of the copper base, The heat absorption area extensively increased
- 2 specially tuned Tf120 s fans are included (in matching the radiator’s properties).
- Customizable logo, exciting DIY experience
- 5V 3-pin addressable RGB, controlled by motherboard or cable controller.
Radiator Dimensions: 282×120×27 mm . Net Weight: 1400 g. Tube length: 310 mm . Pump Speed : 2550 RPM10% . Pump Connector: 3-pin . Fan Dimensions: 120×120×25 mm . Fan Speed: 500~1800 RPM10% . Fan Airflow : 64. 4 CFM . Fan Air Pressure : 2. 33 mmAq . Fan Noise : ≤32. 1 dB(A) . Fan Connector: 4-pin PWM . Bearing Type: Hydro Bearing . LED Type : Addressable RGB LED . LED Connector: 3-pin(+5V-D-G)
Castle Creations Monster X ESC Cooling Fan
Broken a Blade off your Mamba monster x fan? get the gear you need to keep your monster x running at the top of its game. Keeping the competition crying couldn’t be easier!
Hobbypark RC Brushless / Brushed 550 540 Motor Heatsink with Cooling Fan DC 5-6V for RC Crawler Car Truck Off Road Buggy Electric Engine
Item: 550/540 Size Electric Engine Motor Heatsink
Part No.: 7014
Package Include: 1x 550/540 Size Electric Engine Motor Heatsink
Features:
Powered by DC voltage:5V-6V
Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos.
designed to be powered by DC voltage only between 5.0V and no more than 6.0V MAXIMUM! If you choose to power our cooling fans with voltage exceeding 6.0V you are doing so at your own risk! Please make sure that your power source (battery pack, receiver, etc.) is able to supply consistent voltage no lower than 5.0V and no higher than 6.0V. If powering from an ESC, check with the ESC manufacturer to make sure if your ESC is capable of providing enough auxiliary power to handle the added load of extra cooling fans; some ESCs that have built-in fans may not be able to reliably power any additional cooling fans.
Compatible with:550/540 Size Electric Engine Motor
Note:Check your specific model’s manual for compatibility,or Contact us.
Apex RC Products 30x30x10mm Ball Bearing Motor/ESC Cooling Fan – 2 Pack #8030
Apex RC Products is a company of radio control hobby enthusiasts that creates and carries products we use ourselves. All of our products are high quality at a great value.
DEEPCOOL Castle 240EX, Addressable RGB AIO Liquid CPU Cooler, Anti-Leak Technology Inside, Cable Controller and 5V ADD RGB 3-Pin Motherboard Control, TR4/AM4 Supported, 3-Year Warranty
- Anti-leak Tech Inside, exclusively safe. Flow route optimized to reduce operation noise and energy loss.
- 25% more skived fins on the back side of the copper base, the heat absorption area extensively increased. Ultra large copper base, extensive compatibility. It supports LGA20XX/1151/1150/1155/LGA1366 and TR4/AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1.
- 2 specially tuned TF120 S fans are included (in matching the radiator’s properties).
- Customizable Logo, exciting DIY experience!!
- 5V 3-pin Addressable RGB, controlled by motherboard with 5V 3-pin ADD-RGB header or cable controller.
Similar items with 4 stars and above
DEEPCOOL Captain 360EX RGB White, AIO Liquid CPU Cooler, Synchronous RGB Waterblock and 2 LED Strips Controlled by Cable Controller or Motherboard, 3×120mm PWM Fans, AM4 Compatible, 3-Year Warranty
- RGB variable lighting system includes waterblock and two LED Strips that can be controlled by cable controller or motherboard with 12V 4-pin RGB header
- White version, 360mm radiator, three 120mm PWM fans, RGB waterblock, two strips
- Support AMD AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1 and Intel LGA20XX/LGA1366/LGA115X
- Upgraded anti-explosion rubber tube, anti-corrosion, crush resistance & thermostable material
- Updated tooling free installation solution, solid 100% metal material clip
Similar items with 4 stars and above
VANKER High Performance Plastic Cooling Fan for Castle 1515 2200KV 1/8 Motors Fits on Motors with Outside Diameter Between 1-1/2 and 1-7/8"
- Fits on motors with outside diameter between 1-1/2 and 1-7/8″. Compatible with Castle 1515 2200KV 1/8 Motors.
- Fan with wire and connector, shroud and two zip ties.
- Attaching to motor can and plugging into receiver.
- Matereial: Plastic
- Color: Black
- Scale: 1:8
- Length: 49mm
- Width: 45mm
- Height: 45mm
- Wire length: 29.5 cm
- Package Includes: 1 x Cooling Fan 2 x Zip Ties
Description:
100% Brand New and High quality
Attaching to motor can and plugging into receiver
Fan with wire and connector, shroud and two zip ties
See inside for assembly instructions
Fits on motors with outside diameter between 1-1/2 and 1-7/8″
Compatible with Castle 1515 2200KV 1/8 Motors
Specifications:
Matereial: Plastic
Color: Black
Scale: 1:8
Length: 49mm
Width: 45mm
Height: 45mm
Wire length: 29.5 cm
Note:
1. Please allow 1-2cm error due to manual measurement. Please make sure you do not mind before you bid.
2. The colors may be different as the difference display. Please understand
Package Includes:
1 x Cooling Fan
2 x Zip Ties
Please kindly Note: Items will be repackaged to save your shipping charge & to be environmentally friendly. We guaranty the item will be protected well in buble bags, No retail box!
Conclusion
By our suggestions above, we hope that you can found castle cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
