The 5 Best Duron Heating Element

Camco’s 4500W 240V screw-in type low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. This screw-in element has 1-3/8″ thread and is made for State Industries manufactured Duron Tank Water Heaters. Also used in Sears Duron tank water heaters. Each element includes two gaskets. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.

Camco’s 3800W 240V screw-in type low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. This screw-in element has 1-3/8″ thread and is made for State Industries manufactured Duron Tank Water Heaters. Also used in Sears Duron tank water heaters. Each element includes two gaskets. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.

Product Description

Camco’s 4500W 240V screw-in ripple foldback type Ultra low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Premium Ultra LWD Lime Life elements carry a limited 5 year warranty. Ultra LWD and special metal surface (premium grade nickel and stainless steel) reduce chances of lime build-up. They resist dry firing and are ideal for problem water areas and locations with intermittent water supply. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater. The element is a 1-3/8″ thread screw-in.

From the Manufacturer

Camco’s 4500W 240V screw-in ripple foldback type Ultra low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Premium Ultra LWD Lime Life elements carry a limited 5 year warranty. Ultra LWD and special metal surface (premium grade nickel and stainless steel) reduce chances of lime build-up. They resist dry firing and are ideal for problem water areas and locations with intermittent water supply. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater. The element is a 1-3/8″ thread screw-in.

This is a dryer heating element replacement for Whirlpool, Kenmore, Sears, Maytag, KitchenAid, Magic Chef, Amana, Admiral, Norge, Estate, Inglis, Roper, and Crosley. If your dryer does not heat first, check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases, the heating element will have a break in the element if defective. Rated 240 volts and 5400 watts. It replaces 279838 PS334313 AP3094254 3398064 3403585 8565582 AH334313 EA334313, EED4400WQ0. Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Conclusion

By our suggestions above, we hope that you can found duron heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!