homeoneusa 
Nowadays, there are so many products of heating bed 3d printer 400×400 in the market and you are wondering to choose a best one. You have searched for heating bed 3d printer 400×400 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating bed 3d printer 400×400 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
USA Material CR10 S4 Silicone Heater Pad 400x400mm for CR-10 S4 3D Printer Bed w/Screw Holes, Adhesive Backing + Sensor (120V)
- high temperature silicone heater pad for Creality CR-10 S4 3D printer
- This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 S4 3D printer building plate.
- With 1.2meter NTC 100K 3950 thermistor for temperature Control (Choose Number 1 in the Marlin firmware)
- Please DO NOT POKE NEW HOLES for this bed as the whole pad is a circuit, so it will 100% damage the circuit if you poke new holes anywhere
- Important Notes: Please heat only after being mounted onto the plate. Do Not heating without proper heat-sink.
This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 S4 3D printer building plate.
Backing:3M adhesive backing
Size: 400mmx400mm
It’s Electricity AND Heat you are coping with. We are absolutely your right choice with 100% guarantee for high quality heaters
Much safer and more reliable heat source than RepRap PCB heatbeds.
With 1.2meter NTC 100K 3950 thermistor for temperature Control.
Power consumption: 1000W.
Attached with two pieces 1.2meter length power wire
[Gulfcoast Robotics] Borosilicate Glass for Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers, 4mm Thick.
- Thick 4mm glass plate will not warp or bend under heat
- Compatble with Maker Select, Wanhao Duplicator, Anet A8 and other 3D Printers
- 219x219mm outer size, see attached drawing for details.
- Plate perfectly matches larger aluminum plates 220x220mm on Wanhao Duplicator i3, MP Maker Select, Anet A8
- 100% Borosilicate glass content
Anycubic 3D Printer Platform with Aluminum 12V/24V Dual Power MK3 Heatbed, Tempered Glass Plate with Clamps, Durable Build Surface for Prusa i3/Mega S 240x220mm
- Excellent Adhesion: Covered by microporous coating, shows strong adhesion in printing. Carbon-silicone construction makes models to be popped off easily after the bed cools down.
- Customized Design: Compared to any other heated beds in the market, our small Anycubic logo is located on the bottom right corner, never worry about leaving logos on your prints.
- Free Clamps: In order to fix all four corners, Anycubic glass bed features with 4 clamps to prevent separation for your long term use.
- Easy Cleaning: Just gently wipe the surface of the bed with alcohol-soak or acetone by cloth/tissue. Note: Do not clean while its warm, it wont work well.
- Durable&Compatible: Made from special inorganic coating, hardness 8 Mohs and heat resistance up to 400 ℃. Compatible with all the cartesian style 3D printer with a Mk3 heated bed.
400mm x 400mm x 5mm Borosilicate Glass Build Plate for 3D Printer Glass Bed (400 x 400 x 5mm Square) by Express Shipping
- Made from boro glass with high transparence.
- High binding power when heating, easy to separate the plastic parts when cooling.
- Avoid replacing plastic film.
- Get you out of the trouble when plastic film decreased viscosity after a period of usage.
- Material: Borosilicate Glass.
Features: Low coefficient of thermal expansion, resistant to thermal shock compared to regular glass. High binding power when heating, Easy to separate the plastic parts when cooling. Reduces warping, make your printing platform Perfectly flat surface for printing. Flat Polished Edge for safe to handle.
This glass plate is shipped by Express.
Specifications:
Material: Borosilicate Glass
Size: 400x400x5mm
Thickness: 5mm
Warp tolerance: +/-0.2mm
Length tolerance: +/-1mm
Round angle : R5
Packing list:
1 x Glass Plate
nouler Juler 400X400Mm Mk3 Aluminum Plate Heating Bed PCB Board for Cr10 S4 3D Printer
Welcome to our shop, your support is our greatest motivation. All products are sold at low prices, we guarantee quality.
Description:
– Name: Hot bed aluminum substrate
– Material: aluminum substrate
– Size: 410*410*3mm
– Effective print size:400*400*3mm
– 3mm thick aluminum substrate
– Fit for Creality CR-10 S4 3D printer , accepted 12V
Package Includes:
1Pcs Aluminum Heated Bed
1Pcs Heat Insulation Cotton
Note:
Power adapter is notincluded.
Creality CR10 Heatbed 12V Aluminum Heat Bed with Cable and Insulation Mat Installed Well Compatible for 3D Printers Creality CR10 / CR10S Hot Bed Size 310x310x3mm
- Upgraded 2018 Which Heating Much Faster and with 12V Voltage 18A 220W
- Original Parts / Accessories Replacement for Creality 3D Printer CR-10 / CR-10S
- Hot Bed Size:310x310x3mm，Hotbed With Cable Which be Installed Well.
- We only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S
- if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause.
- WARRANTY: All 3D printer accessories with 12 Months Warranty and Lifetime Technical Support.
UCHOOSE, a King Professional 3D printer and Printing Parts Store.
For High Quality & Good Service, We are diligent to Do Our Best!
Note: These are original replacement parts for Creality CR-10 CR-10S 300x300x400mm ;
we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S; if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause.
Specifications:
> Model: 3D Printer 2 in 1 heating bed /Black Aluminum hotbed for CR-10 CR-10S 300x300x400mm 3D Printer
> Product process: Aluminum Substrate
> Hot Bed Size: 310x310x3mm
> Voltage: 12V
> Power: 220W
Package
1 × Aluminum Hot Bed 310x310x3mm With Cable Which be installed well for CR-10 /CR-10S 3D Printer
Warranty:we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S;
if be used to the other brand modles, customers need to afford to the resonsibility by themselves,
meanwhile, our warranty will not valid for this cause.
PinShang 3D Printer Heat Insulation Cotton Foil Self-Adhesive Insulation Cotton for CR-10S Heating Bed Sticker 400x400x10mm
- Made of elastic material, soft, heat resistant, cold resistant, waterproof, shock absorbing.
- Strong sound insulation and absorption performance, heat insulation, damping and antisepsis.
- Used for 220*220/214*214/200*200mm aluminum substrate, PCB hot bed, silicone hot bed bottom.
- Suitable for 3D printer models.
Description:
Item type: Foil Self-adhesive Insulation Cotton
Item No.: CR-10S 400*400 insulation cotton
Advantages: scratch-resistant, long-lasting, high temperature
Applicable to: Suitable for 3D printer models
Size: 400*400*10mm
Weight: 100g
Applicable temperature: The temperature of the medium is in good condition from 50℃一150℃.
Material: cotton
Package Include:
1 * Foil Self-adhesive Insulation Cotton
Note:
The colors deviation might differ due to different monitor settings.
We provide you with the best product and service, if you have any problem, please let us know, and we will solve the problem ASAP. Thank you so much.
300 X 300mm (Approx. 12" X 12") 24V 400W, KEENOVO Universal Flexible Silicone Heater Mat/Pad, 3D Printer Heated Bed Heating Element
- Wonderful silicone heater for your 3D printer heat-bed. Fast Heating with 5.2W per square inch.
- surface mount NTC 100K thermistor ( R-T table available)
- 3M adhesive backing offers excellent and easy mounting.
- Versatile and may be used in many other applications.
- Item Location: Shanghai, China
Custom Design Welcome. If you need different heating solution and management, just tell us your requirements/applications and let our flexible thermal pros design for you. Why Keenovo Heaters? As one of the first manufacturers of flexible heaters( Silicone Heaters & Kapton Heaters) in China, we understand that the reliability of our heating elements for your devices,equipment or machines can NEVER be OVER-emphasized, and we offer best quality at reasonable prices with the following promises: a) We use ONLY Arlon silicone rubber substrate imported from the United States and authentic DuPont kapton film in production to provide the best heater performance and the longest serving life, especially at high temperatures or in long time heating process. b) We offer FREE assistance in heater design to achieve an ideal thermal heating solution for your application. A general idea of what you want is enough to turn our flexible heater design experts on working for you. c) Each and every heater is newly made to order and factory-inspected before delivery to you. KEENOVO is your right choice if you are looking for high quality heaters with 100% guarantee.
400mm x 250mm x 4mm Borosilicate Glass Build Plate for 3D Printer Glass Bed (400 x 250 x 4mm Square) by Express Shipping
- Made from boro glass with high transparence.
- High binding power when heating, easy to separate the plastic parts when cooling.
- Avoid replacing plastic film.
- Get you out of the trouble when plastic film decreased viscosity after a period of usage.
- Material: Borosilicate Glass.
Features: Low coefficient of thermal expansion, resistant to thermal shock compared to regular glass. High binding power when heating, Easy to separate the plastic parts when cooling. Reduces warping, make your printing platform Perfectly flat surface for printing. Flat Polished Edge for safe to handle.
This glass plate is shipped by Express.
Specifications:
Material: Borosilicate Glass
Size: 400x250x4mm
Thickness: 4mm
Warp tolerance: +/-0.2mm
Length tolerance: +/-1mm
Round angle : R5
Packing list:
1 x Glass Plate
Conclusion
By our suggestions above, we hope that you can found heating bed 3d printer 400×400 for you.Please don’t forget to share your experience by comment in this post. Thank you!
