Which Is The Best Heating Pad Aquarium

The iPower reptile heating pad is specially designed to be used on standard glass terrarium for reptile, amphibian, small animal, or plant terrariums. Compared with other general heat pads on the market, our heat pad includes a new proprietary heating film technology that allows the pad to reach desired temperatures faster.

Also included is the new and improved digital heat mat controller. The new iPower heat mat thermostat is digital for greater accuracy. It provides constant customized temp for fermentation, reptiles or brewing.

Specifications

1 – Heat Mat (8″x 12″ Watt: 16W) / 1 – Digital Thermostat (120 Volts / 8.3 Amps Max /60 HZ)

S : 4″x7″ 4 watt — 1-5 Gallon
M : 6″x8″ 8 watt — 10-20 Gallon
L : 8″x12″ 16 watt — 30-40 Gallon
XL : 8″x18″ 24 watt — 50-60 Gallon

Improved Design:
New heating film and insulation increases overall heat transfer across the mat. Reach desired temperatures within minutes.

3M Adhesive Paper:
Provides a strong grip to the contact area. The heat mat stays exactly where you want it.

Energy Efficient:
Reach desired temperatures in a shorter amount of time while consuming less power than other heat mat products.

About Our Digital Thermostat:
Temperature can be set from within a wide range, 40°F – 108°F (5-42°C)
The controller is compatible with most heat mats and ready to plug into North American outlets
Delivers excellent results for seedling germination, plant growth, reptile, or brewing
The thermostat controller is rigorously tested to ensure the safety of your plants, pets and DIY projects.

Installation:

Warmtact Heat Mats are supplied with plastic stick-on feet.

Remove the feet from the paper and attach them to the corners of the enclosure. The 14 and 20W models are supplied with 6 feet, the extra feet should be placed half way along each side of the enclosure.

Attach the mat under the enclosure in the desired location by taping the transparent edges in the desired location by taping the transparent edges of the mat to the underside of the enclosure and switch the mat on at the power outlet.

Monitor and conduct visual inspections of the heat mat daily for the first 3-5 days after installation to ensure heat mat is functioning properly.

Hints & Tips for Best Results

It is important that the heatmat does not cover more than 1/4 to 1/2 of the base area of the enclosure.

In general, the larger the enclosure, the smaller the coverage area should be.

The mat should not be placed directly beneath another heat source such as a heat lamp. Forliver heat mats are designed to operate 24/7 to provide a thermal option for the Warmtact. All models include a built-in thermal cutoff which means the mat does not need to be run on a thermostat.

Ensure an adequate thermal gradient is provided in your environment design for the species being housed.

Specifications:

Material: PET

Category: Heating pad

Plug Type: US Plug

Voltage: 110V

Color: Black

Power: 7W

Size: 6×11 inch

Weight: 0.26 ib

The iPower seedling heat mat will increase the success of seedlings and cuttings, perfect for seeding germination, homebrewing, and pet enclosures terrariums, such as reptile, rodent and arachnid.

The new and improved iPower digital heat mat controller is digital for greater accuracy. It provides constant customized temp seed germination, reptiles and brewing.

Feature

• 10″ x 20.5″ heat mat fits under one common seed flat
• Warms root area 10-20°F over ambient temperature to improve germination
• Provides constant temperature to improve vegetable, plant, herb, and flower seed germination
• Waterproof design allows you to scrub and easier cleaning
• Durable internal insulated wiring for enhanced safety
• Heat mat thermostat controls temperature in colder or warmer environments
• Provides constant optimum temperatures for specific crops
• Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F
• Specs: 120 Volts / 8.3 Max Amps / 60 HZ / 1000 Watts
• Easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug
• ETL certification is proof that a product complies with widely-accepted safety standards
• 1 Year Manufacturer Warranty

Seeding Heat Mat Setup Instructions

• Place sensor into the rooting area about 1″- 1-1/2″
• Position thermostat up and away from seedling trays and stray water. Do not submerge
• Plug heat mat into thermostat
• Plug in thermostat power cord and set maximum desired temperature

Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature.

Abnormal Warning

• if thermostat shows “E1”, it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit
• if thermostat shows “E2”, it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit
• if thermostat shows “E3”, it means that the temperature sensor is not working properly. Please re-install the sensor

About iPower:

• iPower is one of the leading professional hydroponics suppliers over a decade.
• Our goal is to put our best products in every home & garden where needed.
• We only provide the premium quality components and reliable service.

AUOKER reptile heating pad with temperature control, adjustable heat mat for reptiles turtle, tortoise, snakes, lizard, gecko, spider, mammals, crawler – safety turtle aquarium terrarium heater (5w/ 7w/ 20 w).

Give your pet the extra heat it needs. AUOKER's Heat Mat's durable construction provides uniform, evenly distributed heat. Easy to use and safe for all reptiles and amphibians. For use outside your pet's enclosure. It can be mounted under or on side of your pet's enclosure.

Feature
– Regulating switch;
– Low power consumption;
– Enclosed circuit, leak-proof;
– Uniform heat dissipation, waterproof;
– Safe to use, won't hurt your lovely pet;
– Pad can be used under a tank or vivarium;
– Suitable for Turtle, Snakes, Lizard, Gecko, Spider, Small mammals, Crawler, etc;

Specification
– Material: PET;
– Weight: 5 W-95 g/ 3.35 oz, 7 W-115 g/ 4.06 oz, 20 W-168 g/ 5.93 oz;
– Color: Black;
– Plug Style: US Plug;
– Voltage Range: 100v- 120v;
– Regulating Range: 0-35 Degree;
-Size:
5 W – 15 x 14 cm/ 5.91 x 5.51 inches;
7 W – 15 x 28 cm/ 5.091 x 11.02 inches;
20 W – 42 x 28 cm/ 16.54 x 11.02 inches;

Kindly Reminder
The reptile heater mat is slightly waterproof, do not immerse it in water or long-term in high-temperature environment, so as not to cause electrical short-circuit and burn hazards.

Package include
1 x Adjustable Reptile Heating Pad/ Mat(US Plug);

Operation Introduction:

 This type of product is with simple adjusting switch for constant temperature from 0℃ to 35℃ (if precise temperature is necessary, please use it in collocation with thermometers), which is proper in conducting heat source for reptiles (gecko, hermit crab, spider, scorpion, hamster, lizard, snail, horned frog, turtle, pet snake, etc), amphibians and varieties of arthropods.

1. Assisting in the temperature adjustment for a safe and balanced temperature distribution. Low power consumption, appropriate for those animals that tend to hang themselves or cling to the wall or the ones using sun-heated surfaces (e.g. Twigs, desert, woods) as the heat conductors. The bottom heater simulates such situations in heating its own bottom, but it’s noteworthy that cool enough places shall be preserved for the animals to choose when it’s necessary to adjust the heat by themselves.

2. Safe and durable! There is no possibility that your precious will be shocked or burned. When using, it is advisable to put some newspaper beneath the heating pad, or to put some bark chippings or the like that can keep warm and wet above the heating pat, so that the heat can be provided upward exclusively, and thereby achieving the optimal effect of the heating pad without any heat running-off. It is common that there are a few scratches on the pad surface, which does not affect ordinary use of it.

3. The product is water-proof and moisture-resistant, but it’s inadvisable to put it into water directly! It’s advisable to dry or clean the product when its surface gets wet or dirty!

Conclusion

By our suggestions above, we hope that you can found heating pad aquarium for you.Please don’t forget to share your experience by comment in this post. Thank you!