Top 10 Home Hardware Pond Pump

FEATURES:
1.115V/60Hz,1HP powerful heavy duty copper wire motor,max capacity of flow rate 3435GPH. Max depth for pump working under water is 23FT. Max particle size is 1 INCH. Max water temperature is 35℃ and max ambient temperature is 40℃. Build-in overload thermal protector with automatic reset which means this pump can rework after cooling down for a while.

2.Our pump has a float switch which means pump can switch on or off automatically. When water level reach more than approximate 21.65 inch from bottom in water,the pump will start to work automatically and when water level goes down below approximate 9.45 inch,the pump will switch off. If you want to continue pumping water,you can hold up float. Once water level down below the hole of pump bottom and cannot pump water out any more,you should put float switch down or pull out the plug,otherwise pump motor will burn out. The minimum water level what this pump can leave is 1.56 inch.

3.Please note that this pump is not suitable for 24hours continuous running such as powering garden water features or fountains as other sellers may imply. For the first time use,you should submerge pump inclined downward in water to discharge air completely.

4.The pump is widely usefor flooded area,swimming pool,garden pond and so on. Able to drain infiltrating water,cesspools or reservoirs,decanting water and clean,dirty or muddy swimming pools. It is a necessity for a house and you will never worry the basement flood again.

SPECIFICATION:
Voltage/Frequency: 115V/60Hz
Horsepower: 1HP
Max Flow Rate: 3435GPH
Max Supply Height: 24FT
Max Submersible Depth: 23FT
Max Particle Size: 1 INCH
Power Cord Length: 25FT

PACKAGE CONTENT:
1x submersible pump
1x outlet connector
1x user manual

These wet rotor pumps can be positioned vertically or horizontally and can be used submerged or outside the pond below the water surface. It features an oil-free design for maximum safety for all pond life, rope/cable loop for deep water retrieval, and pre-filter included.

These wet rotor pumps can be positioned vertically or horizontally and can be used submerged or outside the pond below the water surface. It features an oil-free design for maximum safety for all pond life, rope/cable loop for deep water retrieval, and pre-filter included.

Enhance your favorite container garden with the soothing look and sound of moving water using the Beckett Direct Drive Small Pond Pump. This submersible, direct drive pump easily powers a small waterfall or fountain, for a wonderful addition to your backyard. The black, plastic casing forms a hardy pump, and the sealed motor can push up to 355 gph of water through tubing to create a unique fountain. The unit has a 12.2′ shutoff as well as a flow adjuster on the outlet, for plenty of versatility in its applications and water volume moved. Place the included plastic prefilter on the threaded inlet to protect the motor from debris, and rotate the front cover for even more placement options. Use 0.5″ ID tubing or the same size FNPT fitting on the threaded outlet to run the water to your statue or fountain. The permanently sealed motor is cooled by the water surrounding it for consistent operation, and the grounded, 16’ long cord helps safely run the unit. Power your statuary fountain or waterfall efficiently and easily with this Direct Drive Small Pond Pump. Two year limited warranty.

Model Number: G325AG
Dimensions: 5.25″L x 3.5″W x 3.5″H, 16’L cord
Pump Outlet: accepts 0.5″ FNPT fittings
Maximum Head: 12.2′ shutoff
Maximum Flow: 355 gph
Power: 50 Watts
Voltage: single-phase, 115V
Mfg. Warranty: 2 year limited warranty

A worry free pump that can easily circulate your small to medium sized fountain. Energy efficient and features a built-in sensor that will automatically turn off the power to your pump if the water level gets too low, and it will turn itself back on when an adequate water level is reached. Safe for fish and plants and built to last for years to come. Comes with a 1 year warranty.

Product Description

1/2 HP, Cast Iron, Submersible Sump Pump, With Vertical Switch, Designed For 11″ Diameter Or Larger Sump Basin. Pumps Up To 4200 GPH at 0′, Durable Cast Iron Volute, Reliable, Reinforced Poly Carbonate Impeller, Corrosion Resistant Stainless Steel Fasteners, Top Suction Design Filters Debris & Minimizes Clogging, Oil Filled, Thermally Protected Motor Prevents Overheating, Designed For Easy Installation Without Any Plumbing Changes, Epoxy Coated Steel, High Performance 1/2 HP, Motor, 1-1/2″ NPT Discharge & Durable Cast Iron Base, Easy Carry Handle For Portability, Float Guard Protects Switch From Hang Ups. This product is assembled in the USA. Easy installation and easy handling.

Amazon.com

The Wayne 1/2 HP cast iron submersible sump pump is designed for work in sump pits 11 inches or larger. Its ceramic mechanical seal keeps this pump going in even the most demanding environments, and the 1 1/2-inch discharges creates maximum flow and ensures easy installation. It works 9 inches on level or 4 inches off level. A two-pole switch prevents basement flooding in the event that one pole sticks, and disconnecting 115-volt conductors prevent damage from lightning. The automatic overload mechanism prevents damage to motor windings, permanently lubricated ball bearings need no oiling, and the waterproof three-prong grounding wire with an 8-foot extension reaches distant outlets. Wayne backs its pump with a three-year limited warranty.

See all Product description

Gorilla Waterproof Patch & Seal Tape instantly seals out water, air and moisture. With an extra thick adhesive layer and UV resistant backing, this flexible tape conforms to form a permanent bond indoors and out. At 4 inches wide use it to patch holes, cracks, gaps and tears, even underwater. Excellent for Home, auto, marine, camping, RVs, outdoors and more. Will work on plastic, metal, aluminum, rubber, wood, vinyl, glass, steel, acrylic and much more. Gorilla Waterproof Patch & Seal Tape can be applied in hot, cold, wet and dry conditions. For best results, apply the tape to a clean surface at room temperature: 1. Keeping liner on tape, cut tape to desired size. Tape size should be larger than the repair area, extending beyond all edges. 2. Remove the release liner and place tape over desired repair area. Tape cannot be repositioned once applied. 3. Rub entire surface of the tape aggressively, especially the edges. STORAGE: Store tape on the top and bottom disc at room temperature. Edges of tape may be sticky. SERVICE TEMP: -70°F to 200°F. Performance will be dependent on surfaces & conditions. Surfaces must be clean, smooth and non-porous. Water must be pressed out from underneath tape. Not for use on seams, applications under pressure, or automotive applications under the hood. May not adhere to silicone or water-repellent materials. Do not use to hang. Permanent: may damage surface or paint if removed. Click on the Gorilla Link at the top of this page to visit the Gorilla Brand Store.

Product Description

Ideal for average to high-volume water and effluent removal in residential spaces such as basements, laundry facilities, and crawl spaces.

From the Manufacturer

This sump pump is ideal for high-volume water removal. It features heavy-duty cast iron construction, energy efficient motor. Extremely versatile, with tethered float switch.

Direct drive pond pump for use in filtration, waterfalls, and streams Epoxy-filled pump is compact in design, produces superior water flow, and has corrosion-resistant plastic housing For use with fountain nozzles, biological filters, and circulating ponds up to 800 gallons Ideal for the water gardening environment For submersible use only 475 GPH capacity 13 feet maximum pumping height 0.50-inch male pipe thread discharge Energy-efficient Wattage: 47 watts Cord length: 15 feet Material: Metal and plastic Weight: 5.3 pounds Product warranty: 3-year warranty.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Home Hardware Pond Pump, eg:

• What are Top 10 Home Hardware Pond Pump for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Home Hardware Pond Pump to buy?
• What are Top Rated Home Hardware Pond Pump to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Home Hardware Pond Pump?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Home Hardware Pond Pump.
• Before deciding to buy any Home Hardware Pond Pump, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Home Hardware Pond Pump and What you should consider when buying the Home Hardware Pond Pump and Where to Buy or Purchase the Home Hardware Pond Pump. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Home Hardware Pond Pump of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Home Hardware Pond Pump.