homeoneusa 
Nowadays, there are so many products of ladder jacks for extension ladders in the market and you are wondering to choose a best one. You have searched for ladder jacks for extension ladders in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ladder jacks for extension ladders which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
45,213 Reviews Scanned
Qualcraft 2420 Two-Rung Short Body Ladder Jack, Silver
- Many uses, such as, painting siding, window repair, general repair. Takes two to use.
- For a super quick set-up and tear down, use Qual-Craft aluminum ladder jacks.
- These tough riveted and welded ladder jacks will work on the inside or outside ladder face.
- They should be fully decked using an 18″ wide platform that comply with OSHA requirements
- Qual-Craft ladder jacks are adjustable to fit round or “D” rung ladders.
Product Description
MIG welded and riveted construction. Will work on either inside or outside ladder face. Will accommodate up to 18" wide-plank. Adjustable to fit round or D-Rung ladders. Complies with OSHA requirements.
From the Manufacturer
The Qual-craft 2 rung, short body aluminum ladder jack is MIG welded and riveted construction for strength and durability. This high quality aluminum ladder jack will work on either the inside or the outside of the ladders face, and will accommodate up to an 18 inch wide plank, and is adjustable to fit round or D rung ladders. Qual-craft now offers 2 new accessories for the ladder jack scaffolding. The new accessories are a Ladder Jack Safety Rail holder and Safety Rail to complete the Ladder Jack Scaffolding System.
Similar items with 4 stars and above
Werner AC78 Quickclick Stabilizer
- N/A
- Made in USA or Imported
- Span of 44-inches and standoff of 10-inches
- Requires no tools
- Spring loaded locking latch makes it easier and quicker to install than any other stabilizer on the market
- Mar-resistant rubber end caps protect work surfaces
- Stabilizer comes with instruction and a paint can hook
Product Description
dimensions: 3″ x 44″ x 10″
weight: 6.5 lbs.
Ladder stabilizer
Installs and removes in seconds
Ideal for painting and home repair projects
Spring-loaded locking latch
Quick release attach pins connect stabilizer arms to body
Non-marring rubber end caps
For use with all Werner aluminum and fiberglass extension ladders
No tools required for assembly
Made in USA
10″ standoff form work surface
Not for use on Type III (200 lbs) aluminum, Type II (225 lbs) fiberglass extension ladders or MT series ladders.
For use on ladders up to 40 ft
Do not use in conjunction with ladder jacks using planks or stages.
Amazon.com
AC78 QuickClick™ Stabilizer spans 44″ and provides a standoff of 10″. Requires no tools to attach to ladder. Spring-loaded locking latch makes it easier and quicker to install/remove than any other stabilizer on the market. Mar-resistant rubber end caps protect the work surface. Paint can hook is included.
Werner AC10-20-02 Long Body Aluminum Ladder Jacks for Stages up to 20-Inch Width (Pair)
Product Description
Long body style attaches to two rungs. Supports 12″, 14″ and 20″ wide stages or planks.
Amazon.com
The Werner Long Body aluminum ladder jacks for stages up to 20-inch width enable the use of planks or stages between Type 1 or 1A ladders. Put the jacks a foot away from each end of the plank or stage them up to 20 inches wide, then use the clamps to hold the plank or stage together
Qualcraft 2430 Aluminum 3 Rung Long Body Ladder Jack
- The Qualcraft Aluminum Ladder Jack will accommodate up to an 18-Inch wide plank
- The Aluminum Ladder Jack can be used inside or outside ladder face
- The Aluminum Ladder Jack is adjustable to fit round or D-rung ladders
- The Aluminum Ladder Jack has a capacity of 2 works plus 75-Pound between 2 ladders
From the Manufacturer
MIG welded and riveted construction for strength and durability. This high quality aluminum ladder jack will work on either the inside or outside of a ladder’s face, and will accommodate up to an 18-Inch. wide plank, and is adjustable to fit round or D rung ladders. This is also a true 3 rung ladder jack because it attaches over 3 rungs.
Werner AC10-20-03 – 3 Rung Aluminum Long Body Ladder Jacks, Pair
- Aluminum Lightweight, sturdy, easy to use, Designed for quick field adjustments, sold as a Pair
- 3 Rung Model Mounts on either side of extension ladder
- Accepts Stages to 20 in width
- Recommended for use with 300 pound Type IA and 375 pound Type IAA extension ladders. (OSHA and ANSI allow use with 250 pound Type I extension ladders.)
- PLATFORM CLAMP SYSTEM Clamp secures platform to ladder jacks and ties supporting ladders together to help secure entire ladder jack system
Recommended for use with 300 -Pound. Type IA and 375 -Pound. Type IAA extension ladders (OSHA and ANSI allow use with 250 -Pound., Type I extension ladders also). Clamp secures platform to ladder jacks and ties supporting ladders together to help secure entire ladder jack system. Sold as a pair..
Werner AC10-14-02 Short Body Aluminum Ladder Jacks for Stages Up to 14-Inch Width
Product Description
Lightweight but sturdy. Spans 2 rungs for maximum support & stability. Will fit round or flat step rungs & mounts on inner or outer front ladder faces.
From the Manufacturer
This is a short body ladder jack. Ladder jacks allow you to run planks or stages between a pair of extension or single ladders. Ladder jacks should be placed one foot from each end of the plank or stage. They should be used on type I or IA ladders. Sort body jacks will support stages up to 14 inches in width, long body up to 20 inches. Werner ladder jacks use a platform clamp system to clamp the plank to the ladder jacks and help tie the entire system together. (priced per pair)
Little Giant Ladder Systems 10104 375-Pound Rated Work Platform Ladder Accessory
- Stand securely and comfortably on the work platform’s broad surface (rated to hold 375 lbs.) at any safe height on the ladder
- Maintain better balance, work from 360 degrees freely with both hands, and finish your project in half the time
- Use second work platform to hold your paint, tools or whatever you need to get the job done
- Use on any Little Giant multi-use or articulating ladder
Product Description
The versatile Work Platform fits on the rungs of any Little Giant multi-use ladder and is rated to hold up to 375 lbs. Use it as a tray for a paint bucket or tools, or use it as a sturdy, comfortable standing platform. Now you can stand on your ladder for extended periods without sore feet and bruised shins; you can work with both hands in any direction. The Work Platform’s unique design also makes it easy to store inside your Little Giant ladder so you won’t have to worry about losing it. The Work Platform also serves as a stabilizing spreader bracket for your Little Giant’s trestle-and-plank scaffolding system.
From the Manufacturer
Little Giant 10104 Work Platform
Louisville Ladder LP-2100-13 Jack Long Body
- The product is long body ladder jacks
- Features six pitch adjustments
- The product is manufactured in china
- Long body ladder jacks
- Spans 3 extension ladder rungs
- Holds stages and planks up to 20-inches wide
- Features six pitch adjustments
- Folds for easy storage
Product Description
Louisville Ladder LP-2100-13 Jack Long Body
From the Manufacturer
Louisville Ladder LP-2100-13 Jack Long Body.
Similar items with 4 stars and above
Werner AC10-20-03 Alum Ladder Jacks, Pair by Werner
Price For: Each Material: Aluminum Item: Ladder Jack Country of Origin (subject to change): China
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy ladder jacks for extension ladders, eg:
- What are Top 10 ladder jacks for extension ladders for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 ladder jacks for extension ladders to buy?
- What are Top Rated ladder jacks for extension ladders to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) ladder jacks for extension ladders?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for ladder jacks for extension ladders.
- Before deciding to buy any ladder jacks for extension ladders, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose ladder jacks for extension ladders and What you should consider when buying the ladder jacks for extension ladders and Where to Buy or Purchase the ladder jacks for extension ladders. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 ladder jacks for extension ladders of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about ladder jacks for extension ladders.
Conclusion
By our suggestions above, we hope that you can found ladder jacks for extension ladders for you.Please don’t forget to share your experience by comment in this post. Thank you!
