The Best Lightning And Home Power Surges

Intermatic’s Smart Guard Surge Protective Device (SPD) uses TPMOV (Thermally Protected Metal Oxide Varistor) technology to protect your home or lite commercial environment from surges in power supply, eliminating the potentially hazardous failure modes that are commonly associated with standard MOV technology. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. Installation of an Intermatic Smart Guard Surge Protective Device (SPD) provides surge protection for your entire home and all of the expensive appliances and electronic equipment inside your home, such as computers, gaming setups, home theatres and other electronic equipment. Smart Guard uses replaceable IModule with LED lights that indicate when IModule needs replacing.

Control lighting and other appliances from anywhere with the Kasa Smart Wi-Fi Plug. Schedule connected devices turn on when you get home, then power down when you go to sleep. Control each outlet individually or as one, set schedules or scenes, even use voice commands with Amazon Alexa, Google Assistant, or Microsoft Cortana.

The Belkin 12 outlet surge protector is perfect for home and office use. With 6 regular outlets and 6 Blockspace outlets, this protector can handle even oversized printer and charger plugs. The convenient USB ports allow you to charge smartphones, tablets and more while working, surfing or checking email. This surge protector also features 3996 joules of protection to keep equipment safe and advanced power filtration to help maintain data integrity and optimal system performance.

 SURGE PROTECTION SAFETY

If a surge protector ever becomes hot to the touch, shut off the unit immediately.

Never daisy-chain power strips to other power strips or extension cords

Never allow a power strip to be exposed to a moist environment

Avoid running too many high-energy consuming appliances through a single surge protector at once

High-energy consuming electronics/appliances include window AC units, space heaters, refrigerators, washers/dryers etc.

Only one power strip should be plugged into a single two-outlet electrical socket

Never cover a surge protector with carpet, furniture, or anything that would limit or prevent air circulation

IMPORTANT: The protective components inside surge protectors that absorb over-voltage spikes will eventually wear out. Most estimates put the average lifespan of a surge protector from 3 to 5 years.

Product Description

Control lighting and other appliances from anywhere with the Kasa Smart Wi-Fi Plug mini. Schedule connected devices turn on when you get home, then power down when you go to sleep. Control each outlet individually or as one, set schedules or scenes, even use voice commands with Amazon Alexa, Google Assistant, or Microsoft Cortana. Frequency Range: 2.4GHz; Protocols Supported: IEEE 802.11b/g/n

Manufacturer Contact Information

(866) 225-8139

Siemens believes today’s residential surge protectors come up short when protecting today’s modern home filled with smart appliances and electronics. This is why we developed our first surge commercial class total home surge protectors. When there is a problem, Siemens first surge takes the guesswork out of knowing when it is time to be replaced. What will you see and hear when this occurs? audible alarm: beeps green led(s): extinguish red service light: flashes first surge is also ground referenced monitoring-equipped notifying if you have a rare safety hazard exists due to a compromised electrical system neutral to ground bond. What will you see and hear when this occurs? audible alarm: beeps green led(s): remains lit red service light: flashes.

From APC power engineering labs comes the H Type power conditioner, a single unit that delivers pure, stable power for high performance AV. The preferred choice of power protection for high performance home entertainment systems, The H Type power conditioner combines surge protection, isolated noise filtering, and voltage regulation. Finally, there’s a solution that eliminates stress on component power supplies, eradicates EMI RFI and voltage fluctuation as a source of AV signal degradation, and protects equipment from damaging surges, spikes, voltages fluctuations, and lightning.

Product Description

Make sure you’re getting the most out of your home theater equipment with the MAX® 5400-PM from Panamax. Voltage Regulation Improve system performance and prolong equipment life by providing a consistent level of optimal power to your equipment. Improves Picture and Sound Quality Level 4+ power cleaning and filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows you`re a/V equipment to perform up to its full capability. Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level Panamax’s patent pending AVM circuitry continuosly monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected. Reduces Cross-Contamination Between Components The M5400-PM is designed to provide noise isolation between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank.

From the Manufacturer

Level 4+ Power Cleaning and Linear Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability. Panamax’s patent pending AVM circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.

The M5400-PM is designed to provide noise isolation between 5 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.

Improve Your Picture and Sound Quality While Protecting Your Home Theater Investment

All the features you need to keep your system running clean and safe

Voltage Regulation

Regulates the output voltage on Banks 1-4 to 120 VAC ± 5 VAC. This is accomplished through two boost stages and one buck stage of voltage regulation. In Boost Stage 1 the voltage is boosted in the 109-119V range, while Boost Stage 2 boosts the voltage in the 100-109V range. The Buck Stage acts to reduce voltage in the 125-136V range. LiFT Technology EMI/RFI Noise Filtration : Your audio/video components are constantly being bombarded by electromagnetic interference (EMI) and radio frequency interference (RFI) through their AC power source. This contaminated power can affect audio/video equipment and will degrade the overall performance of your entire system. Common symptoms of contaminated power include loss of picture detail, dull colors, pops, hisses, hums and visual artifacts.

Automatic Over and Under Voltage Protection (AVM)

Panamax’s patent pending power monitoring circuitry constantly monitors the AC line voltage for unsafe voltage conditions such as momentary spikes or prolonged over-voltages and under-voltages (brownouts). These unsafe conditions pose a very dangerous threat to all electronic equipment within the home. If the MAX 5400-PM senses an unsafe power condition, it will automatically disconnect your equipment from the power to protect equipment from damage.Once the voltage returns to a safe level, the M5400-PM will automatically reconnect the power. When subjected to a 6,000V (open circuit voltage) / 500A (short circuit current) surge, the M5400-PM limits its voltage output to less than 330V peak, UL’s best rating. If the magnitude of the surge is greater than the capacity of the surge protection components, the M5400-PM’s Protect or Disconnect Circuitry will disconnect your equipment in order to protect it. The M5400-PM will need to be repaired or replaced by Panamax if this occurs within the product’s 3 year warranty.

Five Isolated Outlet Banks

The M5400-PM is designed to provide noise isolation between the outlet banks so that any noise created by A/V components plugged into the M5400-PM cannot contaminate the power going to equipment plugged into the other outlet banks of the M5400-PM.

Sequential Startup/Shutdown

Complex audio/video systems may be susceptible to voltage transients generated internally at start-up/shutdown if all of the equipment is powered on or off at the same time. This can cause speaker “thumps” which are not only annoying but can also damage the speakers and/or trip product circuit breakers. The M5400-PM is designed to eliminate these transients by providing a “start-up” delay for the High-Current outlets and a “shutdown” delay for the Switched Outlet Banks. This minimizes in-rush current issues by allowing the components plugged into the Switched Outlet Banks to power-up and stabilize before any amplifiers and powered sub-woofers are turned on. This sequence is reversed during shutdown. The amplifiers and powered subwoofers turn off, their power supplies drain, and then the equipment plugged into the Switched Outlet Banks are turned off.

USB Charger, LAN, and Gaming Ports

The M5400-PM features a front panel convenience charger for mp3 players, cell phones, video game controllers, and other small electronics. (NOTE: Some devices may not be compatible with this USB charger.) Add to this an easy-to-access LAN port pass-thru from the rear panel to the front panel for online gaming and a convenience outlet located on the front panel, perfect for gaming systems and other electronics.

Voltage Sense Trigger

The M5400-PM voltage sense trigger input uses a standard 3.5mm (1/8″) mini-mono plug. This feature provides an ON/OFF trigger for the M5400-PM using a Direct Current voltage signal. Many components such as pre-amplifiers and receivers have a DC trigger built in, and will transmit a constant power signal when turned on and in use. The presence of this power signal will turn on the M5400- PM’s switched outlets. When the source component is turned off, the voltage trigger signal is also turned off and the M5400-PM’s shutdown sequence is initiated. An AC Adapter of the appropriate voltage plugged into a switched outlet may also be used if a DC trigger is not built in.

Protection for Cable/Satellite/Antenna as Well as LAN and Telephone Lines

Coaxial protection circuits achieve optimum signal quality from our new coaxial protectors that have the smallest signal loss on the market – less than 0.5 db of attenuation from 0 MHz to 2.2 GHz. Our upgraded coaxial protection has been specifically designed to virtually eliminate signal loss. The clamping level of 75V will meet the demands of both cable and satellite voltage while minimizing exposure to damaging spikes and surges.

Digital video recorders and satellite TV receivers require a telephone line connection for TV show scheduling and/or Pay-Per-View services. The M5400-PM also provides surge protection for this line. One pair of RJ-11 telephone jacks is provided for this. The circuitry utilizes auto-resetting PTCRs and solidstate SIDACtors for reliability and unsurpassed protection. The clamping level of the M5400- PM’s telephone protector is 260 volts. This will allow typical ring voltage (90-130VAC) and operating battery voltage (-48DC) to pass through the circuit and still protect the modem in your satellite receiver from damage.

Protection circuits for 10/100 baseT Ethernet lines. Incoming LAN line MUST be plugged into the LINE jack. Patch cord to the equipment MUST be plugged into the EQUIP jacks. 1 LAN jack goes to the front panel output jack. 8 wire protection, 52V clamping.

The M5400 provides reliable power protection for mid-sized home theater systems

Technical Specifications

The Panamax Family of Power Management Solutions for Home Theater Applications

		Surge Protection & AVM	Voltage Regulation	Home Theater Applications	Linear Filtration	Isolated Outlet Banks	Total Outlets
	How this benefits your home theater system:	Protects equipment against momentary spikes and prolonged over/under voltages by disconnecting the power and reconnecting it when safe power returns	Improves system performance and extends equipment life by providing a consistent level of optimal power to your equipment	Just a few examples of electronic equipment pieces that need power management protection	Improves Picture and Sound. Provides concert-quality sound and theater quality video	Isolating outlet banks from one another prevents noise contamination between components	Each model offers a mix of always-on, switched, and high-current outlets to meet the needs of every system
	M7500-PRO	Included (The Ultimate)* *with regulation	Included	50” and above TV screen size, Media Servers, Home Automation Systems, Audio/Video Receivers (AVR), Amplifiers, DVD players, Video Game Consoles, Powered Speakers, Subwoofers	EMI/RFI Banks 1 – 4 100 db, 100 KHz – 2 MHz Bank 5, (Hi Current) 60 db, 100 KHz – 2 MHz	7	11
	M5400-PM	Included (Best)* *with regulation	Included	50” and above TV screen size, Media Servers, Home Automation Systems, Audio/Video Receivers (AVR), Amplifiers, DVD players, Video Game Consoles, Powered Speakers, Subwoofers	EMI/RFI Banks 1-4: 80db, 100KHz, -2MHz Bank 5 (Hi Current): 60db, 100KHz -2MHz	5	11
	M5300-PM	Included (Best)	Not included	50” and above TV screen size, Receivers, Amplifiers, DVD players, Video Game Consoles, Powered Speakers, Subwoofers	EMI/RFI Banks 1-4: 80db, 100KHz, -2MHz Bank 5 (Hi Current): 60db, 100KHz, -2MHz	5	11
	M5100-PM	Included (Better)	Not included	19″ and above TV screen size, Receivers, DVD players, Video Game Consoles, Powered Speakers, Subwoofers	EMI/RFI Banks 1-2: 80db, 100KHz, -2MHz Bank 3 (Hi Current): 60db, 100KHz, -2MHz	3	11
	M4300-PM	Included (Good)	Not included	19″ and above TV screen size, Receivers, DVD players, Video Game Consoles, Powered Speakers, Subwoofers	EMI/RFI Bank 1: 60db, 100KHz, -2MHz Bank 2 (Hi Current): 49db, 100KHz, -2MHz	2	9

What’s in the Box

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Lightning And Home Power Surges, eg:

• What are Top 10 Lightning And Home Power Surges for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Lightning And Home Power Surges to buy?
• What are Top Rated Lightning And Home Power Surges to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Lightning And Home Power Surges?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Lightning And Home Power Surges.
• Before deciding to buy any Lightning And Home Power Surges, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Lightning And Home Power Surges and What you should consider when buying the Lightning And Home Power Surges and Where to Buy or Purchase the Lightning And Home Power Surges. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Lightning And Home Power Surges of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Lightning And Home Power Surges.