homeoneusa 
Nowadays, there are so many products of oxy acetylene heating torch tip in the market and you are wondering to choose a best one. You have searched for oxy acetylene heating torch tip in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings oxy acetylene heating torch tip which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Hobart 770169 Oxy/Acet,Tip,Rosebud 6 Repl Type MFA-1(Victor Style)
From the Manufacturer
Heating tip – MFA-1 Med/Lt Duty (Rosebud/MFA) Compatible with Victor
Hot Max 24079 Medium Duty Victor Style Gas Heating Tip/Nozzle for Oxy-Acetylene, Size 4 (4-W-1)
Hot Max Victor Style gas heating tip/nozzle is always a nice option for anyone with an oxy-acetylene cutting torch. It can be used for most anything from heating up bolts for loosening to beating or bending flat steel. Some people try to make a cutting tip do the job of a heating tip but most generally there is not enough heat. Of course there is always the risk of blowing right through the metal with the oxygen from your cutting tip. For safety, efficiency, and many other reasons, we always recommend using the right tool for the job. Most of the heating tips that are available for cutting torches are made for use with acetylene gas.
Similar items with 4 stars and above
Hot Max 24089 Heavy Duty Victor Style Gas Heating Tip/Nozzle for Oxy-Acetylene, 8 (8MFA-FS)
Hot Max Victor Style Rosebud heating nozzle is always a nice option for anyone with an oxy-acetylene cutting torch. It can be used for most anything from heating up bolts for loosening to beating or bending flat steel. Some people try to make a cutting tip do the job of a heating tip but most generally there is not enough heat. Of course there is always the risk of blowing right through the metal with the oxygen from your cutting tip. For safety, efficiency, and many other reasons, we always recommend using the right tool for the job. Most of the heating tips that are available for cutting torches are made for use with acetylene gas.
Similar items with 4 stars and above
Uniweld MTR Micro 6000 Miniature Rosebud Tip
Uniweld MTR micro 6000 miniature rosebud tip provides a stable, consentrated flame even in windy conditions. Tip is capable of brazing up to 1 1/2″ of copper. Tip elbow is copper, mixer and nut are brass. Has two O-Ring seals so tip nut only needs to be firmly hand tightened. Tip will fit either the 71 or WH550 welding handle.
Heavy Duty Oxy-Fuel Torch Replacement for Victor with Check Valves + Cutting Tip + Welding Tip + Heating Tip (Acetylene)
- Die Forged Brass Heavy Duty Torch Replacement for Victor Series 300 Torches
- Uses Series “1” 1-101 Cutting Tips Replacement for Victor (Large Tips)
- Includes one 1-101-1 Acetylene Tip that can cut up to 3/4″, one 0-W Welding Tip and one 4-MFA Acetylene Heating Nozzle. (Thicker cuts, welds and heat capacities can be achieved with additional higher number tips)
- Includes Check valves for additional safety – Use of flashback arrestors is always recommended.
- Assembled Handle + Cutting Attachment Total Length: 18.5″ – Total Weight with Cutting Tip: 3 Lb – 6Oz
SÜA offers this piece of equipment that has been manufactured using the highest quality standard in raw material selection and manufacturing procedures. This products is NOT manufactured by Victor. Victor is a registered trademark of Victor Technologies. Mundaka Technologies is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Victor Technologies or any of its subsidiaries or its affiliates.
Turbo Torch Air Acetylene Torch Kit Propane Heating Nozzle Rosebud Tip Single-Head Heating Torch Kit Gas Heating Tip/Nozzle for Oxy-Acetylene, Model 30 (double switch)
- 1. Material: zinc + iron alloy, copper, model: 30, nozzle diameter: 30MM, nozzle length: 80MM, barrel length: 150MM, handle length: 110MM. The diameter of the handle interface is 0.81.
- 2. Wide range of applications, jewelry processing, cable repair, pipe welding, heating and thawing, high temperature baking, etc.
- 3. Single switch, double open and double choice. The double switch is more economical and safer than single switch.
- 4. Explosion-proof high-pressure rubber tube, anti-high pressure, anti-aging, light texture, wear resistance, oil resistance, anti-bending.
- 5. Industrial design, seamless nozzle, precision die casting, high range, high energy, high temperature.
Wide range of applications, jewelry processing, cable repair, pipe welding, heating and thawing, high temperature baking, etc.
Single switch, double open and double choice, the double switch is more economical and safer than the single switch.
Explosion-proof high-pressure rubber hose, anti-high pressure, anti-aging, light texture, wear resistance, oil resistance, anti-bending.
Material: zinc + iron alloy, copper
Model: 30
Nozzle diameter: 30MM
Nozzle length: 80MM
Barrel length: 150MM
Handle length: 110MM
The diameter of the handle interface is 0.81.
Instructions for use:
1. Check
Connect the gun parts, rotate the air tube clamp (or use the wire to tighten), connect the cylinder interface, close the gun to close, and release the cylinder valve to check whether the parts are leaking.
2. Ignition
Loosen the gun switch slightly and ignite directly at the nozzle to adjust the gun switch to the desired temperature.
3. Close
First, close the cylinder valve. After the flame is turned off, turn off the switch. Do not leave residual gas in the tube. Hang the gun and the air tube and put it in a dry place.
Precautions:
1. Do not touch oil and corrosive gases or liquids.
2. Prohibit large airflow ignition.
3. Each joint should be inspected frequently and kept sealed.
4. The air pipe burn and aging should be replaced in time.
Similar items with 4 stars and above
SÜA Heating Nozzle/Rosebud 15-MFA Replacement for 300 Series Victor Torch Handles. Oxy/Acetylene
- Heavy Duty Heating Tip/Nozzle/Rosebud with Mixer Replacement for 300 Series Victor torch handles
- Gases: Oxygen/Acetylene Only – Heat Output: 323,000 BTU/h
- This is a general purpose heating nozzle with multi-flame head, ideal for heat treating, metal bending, caloric metal expansion, priming, etc. Manufactured in high-quality copper and brass.
- Please Check Tip Chart Picture for Sizes, Heating Capacity and other operational parameters. Always use flashback arrestors
- You will receive 01 Heating Nozzle Size: #15
SÜA offers this piece of equipment that has been manufactured using the highest quality standard in raw material selection and manufacturing procedures. This product is NOT manufactured by Victor and it does not resemble any equipment manufactured by Victor. Victor is a registered trademark of Victor Technologies. Mundaka Technologies is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Victor Technologies or any of its subsidiaries or its affiliates.
Goss 3033H-15 Brazing/Heating Tip
This Multi-Flame Heating/Rosebud tip provides greater heat output than standard welding tips. Goss Inc has been manufacturing and distributing quality products in USA for over 70 years.
SÜA – Medium Duty Oxy-Fuel Torch with Check Valves and Cutting Tip (Acetylene) – Compatible with Victor
- Die Forged Brass Medium Duty Torch Replacement for Victor Series 100 Torches
- Uses Series “3” Cutting Tips (Small Tips) and comptible with Victor Series 100 Welding and Heating Tips.
- Included Size “2” Acetylene or Propane Tip. Can Cut up to 1″ (Thicker or Thinner cuts can be achieved with additional number tips – See table in picture Nº: 5)
- Select from the menu between Acetylene or Propane and Cutting, Welding and Heating Tips options.
- Includes Check valves for additional safety – Use of flashback arrestors is always recommended. Assembled Handle + Cutting Attachment Total Length: 17″ – Total Weight with Cutting Tip: 1 Lb – 14Oz
SÜA offers this piece of equipment that has been manufactured using the highest quality standard in raw material selection and manufacturing procedures. This product is NOT manufactured by Victor and it does not resemble any equipment manufactured by Victor. Victor is a registered trademark of Victor Technologies. Mundaka Technologies is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Victor Technologies or any of its subsidiaries or its affiliates.
WeldingCity Heavy Duty Acetylene Heating Tip (Rosebud) 6-MFA Size 6 for Victor Oxyfuel 300 Series Torch
- Premium quality brand-new Acetylene heavy duty heating tip (Rosebud) 6-MFA (W mixer) size 6 for Victor torch 300 Series.
- Fits Victor heavy duty 300 series handles such as 315C/310FC/310C/350/310R/HD310C and other aftermarkets versions
- You get One (1) Victor style heating (Rosebud) tip 6-MFA at this price
- We use U.S. Postal Service (USPS) as main carrier. Please provide a USPS deliverable address.
Premium quality brand-new Acetylene heavy duty heating tip (Rosebud) 6-MFA size 6 for Victor oxyfuel welding torch
Conclusion
By our suggestions above, we hope that you can found oxy acetylene heating torch tip for you.Please don’t forget to share your experience by comment in this post. Thank you!
