homeoneusa 
Nowadays, there are so many products of pentek whole house water filter in the market and you are wondering to choose a best one. You have searched for pentek whole house water filter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pentek whole house water filter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Pentek 150233, Big Blue, 1" In/Out, #20 Blue/Black, HFPP, w/ PR
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 20” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150233 20-BB 1” #20 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 20” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 20 x 4-1/2 inches (508 x 114 mm) |
| Initial pressure drop at 15 gpm | 1 psi |
| Maximum temperature | 100 degrees F (37.8 degrees C) |
| Maximum pressure | 90 psi |
| Maximum dimensions (H x W) | 23-3/8 x 7-1/4 inches (594 x 184 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek 1" Threaded 20" Genuine Big Blue Filter Housing Kit | Complete with Bracket, Screws and Wrench (150233 150061 144368)
- HIGH FLOW – HEAVY SEDIMENT : Large filter housing for high-flow and heavy sediment applications
- COMPLETE KIT : Housing comes with Stainless Steel Bracket, Screws and Wrench – Guaranteed to fit!
- QUALITY MATERIALS : Reinforced & High-Flow Polypropylene, Stainless Steel bracket & Screws
- PRESSURE RELIEF : Pressure relief button to remove pressure for easier cartridge replacement
- WARRANTY : One year limited warranty – see Pentek Inc. for details
This complete kit comes to you from Better H2O Products Inc which includs :
✪ Genuine Pentek 1″ #20 Big Blue filter housing (Pentek # 150233) with pressure relief valve,
✪ Genuine Pentek stainless steel bracket with stainless steel screws (Pentek # 150061) [which will not rust like white painted ones]
✪ Genuine Wrench (Pentek # 144368)
✪ All guaranteed to fit!
Don’t assume the parts will fit – order the complete kit!
All parts of this kit come neatly packaged in a single box
► Initial pressure drop of 2 psi at a flow rate of 15 gpm
►Suitable for high-flow and heavy sediment applications
►Whole home filtration, food and service, irrigation and more applications
►Opaque blue sump is made from reinforced polypropylene for strength and chemical resistance
►Black cap is made from high-flow polypropylene (HFPP) for stiffness
►1” female National Pipe Thread Taper (NPT) threaded input and output connections
►Nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal
►Pressure relief button on inlet to release pressure for easier filter changes
►Can be used with a 20” x 4-1/2” filter cartridge (sold separately)
►Maximum operating pressure of 90 psi
►Maximum operating temperature of 100 degrees F (37.8 degrees C)
►NSF 42 Certified for quality assurance
Pentek 3G-STANDARD-CLEAR-34-PR10 Whole House Water Filtration System Housing
Pentek took 35 years of experience with time-tested industry standard housings and made it even better with the 3G series. The PENTEK-3G-STANDARD-CLEAR-34-PR10 is manufactured from durable polypropylene and has excellent chemical resistance. The 3G-STANDARD-CLEAR-34-PR10 housing is compatible with a wide variety of filter cartridges and is ideal for residential, commercial and industrial applications. When setting up this housing on the water line, use teflon tape to ensure a tight leak free seal. When closing the housing after inserting a filter cartridge, be sure to apply food grade silicon lubricant to both the threads and the o-ring to ensure a good seal, and to make changing the cartridge easier. Be sure not to pinch the o-ring while closing this housing, as a pinched o-ring can leak
Pentek 3/4" Threaded 10" Genuine Big Blue Filter Housing Kit | Complete with Bracket, Screws and Wrench (150469 150061 150296)
- HIGH FLOW – HEAVY SEDIMENT : Large filter housing for high-flow and heavy sediment applications
- COMPLETE KIT : Housing comes with Stainless Steel Bracket, Screws and Wrench – Guaranteed to fit!
- QUALITY MATERIALS : Reinforced & High-Flow Polypropylene, Stainless Steel bracket & Screws
- PRESSURE RELIEF : Pressure relief button to remove pressure for easier cartridge replacement
- WARRANTY : One year limited warranty – see Pentek Inc. for details
This complete kit comes to you from Better H2O Products Inc which includes :
✪ Genuine Pentek 3/4″” #10 Big Blue filter housing (Pentek # 150469) with pressure relief valve,
✪ Genuine Pentek stainless steel bracket with stainless steel screws (Pentek # 150061) [which will not rust like white painted ones]
✪ Genuine Wrench (Pentek # 150296)
✪ All guaranteed to fit!
Don’t assume the parts will fit – order the complete kit!
All parts of this kit come neatly packaged in a single box
► Initial pressure drop of 2 psi at a flow rate of 15 gpm
►Suitable for high-flow and heavy sediment applications
►Whole home filtration, food and service, irrigation and more applications
►Opaque blue sump is made from reinforced polypropylene for strength and chemical resistance
►Black cap is made from high-flow polypropylene (HFPP) for stiffness
►3/4” female National Pipe Thread Taper (NPT) threaded input and output connections
►Nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal
►Pressure relief button on inlet to release pressure for easier filter changes
►Can be used with a 10” x 4-1/2” filter cartridge (sold separately)
►Maximum operating pressure of 100 psi
►Maximum operating temperature of 100 degrees F (37.8 degrees C)
►NSF 42 Certified for quality assurance
Pentek 160168 BBFS-222 1" #20 Big Blue Three-Housing Filter System
Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet
- Large filter housing for high-flow and heavy sediment applications
- Reinforced polypropylene sump for strength and chemical resistance
- Use with a 10” x 4-1/2” filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 15 gpm
This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 4-1/2 inches (254 x 114 mm) |
| Initial pressure drop at 15 gpm | 1 psi |
| Maximum temperature | 100 degrees F (37.8 degrees C) |
| Maximum pressure | 100 psi |
| Maximum dimensions (H x W) | 13-1/8 x 7-1/4 inches (333 x 184 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek CFB-PLUS10BB Fibredyne Modified Carbon Block 5 m Filter
- The Fibredyne CFB-Plus10BB big blue water filter cartridges are an enhanced version of our CFB product
- CFB-Plus series products are modified molded blocks manufactured using our proprietary fibredyne technology
- The result is a single cartridge that combines the benefits of both a sediment filter and a carbon block into a single cartridge
Pentek 255677-43 CFB-Plus10BB Fibredyne Modified Carbon Block 5 mic Filter 255677-43 10″ BB Pentek 255677-43 CFB-Plus10BB Fibredyne Modified Carbon Block 5 micron Filter Features: The Pentek CFB-Plus10BB Fibredyne big blue water filter cartridges are an enhanced version of our CFB product. It offers the same benefits with even greater chlorine taste and odor reduction and the highest sediment reduction found in a carbon cartridge. CFB-Plus Series products are modified molded blocks manufactured using our proprietary Fibredyne technology. This technology creates a unique filter media by attaching powdered activated carbon onto a cellulose-free synthetic fiber matrix. The result is a single cartridge that combines the benefits of both a sediment filter and a carbon block into a single cartridge. Fibredynes carbon block technology also offers up to two times the chlorine taste and odor reduction and dirt-holding capacity of traditional blocks.* In addition this technology will not release fines into the effluent stream due to a unique post-filtration layer that is fused to the carbon/fiber media blend. CFB-Plus Series cartridges are manufactured entirely from FDA-compliant materials making them an ideal choice for a wide range of residential food service commercial and industrial applications. Greater chlorine taste and odor reduction and the highest sediment reduction found in a carbon cartridge Combines the benefits of both a sediment filter and a carbon block into a single cartridge Offers up to two times the chlorine taste and odor reduction and dirt-holding capacity of traditional blocks Will not release fines into the effluent stream Manufactured entirely from FDA-compliant materials Ideal choice for a wide range of residential food service commercial and industrial applications Pentek 10″ BB 255677-43 CFB-Plus10BB Fibredyne Filter Specifications 255677-43 CFB-Plus10BB.
Pentek BIG-CLEAR-LX-10 Whole House 10" Filter Housing, Clear
Pentek’s Big Blue filter housings offer the versatility to meet all of your large-capacity filtration needs, including high-flow and heavy-sediment applications. The PENTEK-BIG-CLEAR-LX-10 is manufactured from durable polypropylene and has excellent chemical resistance. The BIG-CLEAR-LX-10 housing is compatible with a wide variety of heavy duty filter cartridges and offers on-site examination of flow, performance and cartridge life making it ideal for many residential and commercial applications.
Pentek RFC20-BB Carbon Filter Cartridge, 20" x 4-1/2"
- Reduces chlorine taste and odor in drinking water
- Granular activated carbon (GAC) media with spun polypropylene core and polypropylene end caps for strength
- Porous polyethylene 70-micron outer shell reduces carbon fines and other particles
- Initial pressure drop of 0.90 psi at a flow rate of 4 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
SimPure Big Blue Filter Housing, 20 Inch Universal Water Filter Housing for Whole House Water Filtration System, with Heavy Duty Steel Mounting Bracket, 4 Screws, Housing Wrench (20”x4.5”)
- HIGH QUALITY: The heavy-duty whole house water filter housing is made of Reinforced Polypropylene for strength and chemical resistance. The o-ring is used to ensure leak-free installation.
- UNIVERSIAL SIZE: 20″ x 4.5” Standard whole house water filtration system set, fits all 4.5 “ x 20 ” filters cartridges (sold separately). You can choose 20” water filters like Geekpure, iSpring, Ronaqua, Hydronix, Pentek, etc.
- LARGE FILTRATION CAPACITY: The product have 1” FNPT water inlet and outlet to ensure high water flow. It can filter large capacity of water and provide sufficient purified water.
- EASY INSTALLATION：This big blue filter housing is designed to provide security and ease of use. Come with wrench and Built-in Pressure relief button for easy filter replacement. Just screw off and on to change filter cartridges with wrench. (Including 1 housing bracket and 4 screws).
- EXCELLENT CUSTOMER SERVICE: We provide one year warranty and 30 days money back, lifetime friendly customer service, if you have any questions, do not hesitate to contact us, we will always to stand help you.
Conclusion
By our suggestions above, we hope that you can found pentek whole house water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!
