homeoneusa 
Nowadays, there are so many products of pixhawk mount 3m in the market and you are wondering to choose a best one. You have searched for pixhawk mount 3m in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pixhawk mount 3m which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
23,345 Reviews Scanned
YoungRC 7M GPS Module Built-in Compass Protective Case with GPS Antenna Mount for APM2.6 APM2.8 Pixhawk PX4 Flight Control
- ★★★Special designed for APM 2.6 2.8 flight controller(Note:If you use it to Pixhawk Flight Controller, Please replace the connect by yourself.)
- ★A new generation 7M GPS,with low power consumption and high precision.
- ★7M GPS module ,This is the high performance GPS module with HMC5883L compass.
- ★Features active circuitry for the ceramic patch antenna, rechargeable backup Capacitors for warm starts.
- ★★★ Attention: the GPS can only use in Pixhawk and APM Flight controller,it can’t work with other flight controller.
Description:
– Main chip:7M
– C/A code,1.023MHz
– Receiver Frequency:L1 [1575.42MHz]
– Locate performance
– 2D :3m(Average)
– 2D:2m(average),with WAAS
– drifting<0.02m>
– accuracy:1us
– coordinate system:WGS-84
– max attitude height:18000
– Max speed:515m/s
– accerlaration:<>
Specification:
– tracking sensitivity:-161dBm
– Capture sensitivity:-148dBm
– cold start time:38s average
– Warm start time:35s average
– hot start time:1s average
– Capture time:0.1s Average
– Temperature:40 to +80
– wide power supply voltage:+3.5V~+5.5V
Module V2.0
Package including:
7M GPS with Compass and Shell x1
GPS stand holder x1pc
Readytosky M8N GPS Module Built-in Compass Protective Case with GPS Antenna Mount for Standard Pixhawk 2.4.6 2.4.8 Flight Controller
- ★★★Special designed for Pixhawk 2.4.6 2.4.8 flight controller,ASIN:B07CHQ7SZ4.(Note:If you use it to APM Flight Controller, Please replace the connect by yourself.)
- ★The ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy.
- ★A new generation M8N GPS,with low power consumption and high precision.
- ★The GPS light only can light up when it search the satellite signal outdoor
- ROM already been fix,it cannot be flash and change.
- ★★★ Attention: the GPS can only use in Pixhawk and APM Flight controller,it can’t work with other flight controller.
ShareGoo Glass Fiber Shock Absorber Board Anti-vibration Damping Plate Mount for RC APM2.6 APM2.8 Pixhawk PX4 Flight Controller
- This fiber glass flight controller anti-vibration shock absorber is good for APM, Pixhawk, KK and MWC etc.
- Large Plate Size: 100*69*1.5 mm
- Small Plate Size: 91*61*1.5 mm
- Item Weight: 24g
- Notice:The flight controller does not includes,the main image only for reference.
This fiber glass flight controller anti-vibration shock absorber is good for APM, Pixhawk, KK and MWC etc.
Material: Glass fiber
Large Plate Size：100*69*1.5mm
Small Plate Size: 91*61*1.5mm
Weight: 24g
Package includes:
Upper fiber glass plate x 1
Bottom fiber glass plate x 1
Anti-vibration shock absorber x 4
Double tape x 2
Notice:The flight controller does not includes,the main image only for reference.
FPVDrone M8N GPS Module Built-in Compass+GPS Anti-interference Shield Stand Antenna Mount for APM 2.6 APM 2.8 Pixhawk Flight Controller
- ★M8N GPS Module for APM2.6 APM2.8 Flight Controller and GPS Antenna Mount to protect the GPS preventing electromagnetic interference.
- ★A new generation M8N GPS Module,with low power consumption and high precision.
- ★The M8N and ceramic antenna make this a very accurate receiver,fast locks & lots of satellites.
- ★★★Note:it is default for APM flight controller,if you use with Pixhawk flight controller,you need to change the connector by yourself.
- ★★★Note:When use 2.8 boards with our GPS module must remove the jumper,if you need to calibrate,make the control and GPS compass direction same and keep the two position fixed(cannot make any move,must fix them on quadcopter and then calibrate,or it will be failed.)
GPS Chip parameters:
Receiver type 72-channel u-blox M8 engine
GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
SBAS L1 C/A: WAAS, EGNOS, MSAS
Galileo-ready E1B/C (GPS M8N)
Nav. update rate1 Single GNSS: up to 18 HZ
Concurrent GNSS: up to 10 Hz
Position accuracy2 2.0 m CEP
Acquisition2 Cold starts: 26 s
Aided starts: 2 s
Reacquisition: 1.5 s
Sensitivity2 Tracking & Nav: –167 dBm
Cold starts: –148 dBm
Hot starts: –156 dBm
Assistance AssistNow GNSS Online
AssistNow GNSS Offline (up to 35 days)3
AssistNow Autonomous (up to 6 days)
OMA SUPL & 3GPP compliant
Oscillator TCXO (GPS M8N/Q),
Crystal (GPS M8M)
RTC crystal Built-In
Noise figure On-chip LNA (GPS M8M). Extra LNA for
lowest noise figure (GPS M8N/Q)
Anti jamming Active CW detection and removal. Extra
onboard SAW band pass filter (GPS M8N/Q)
Memory ROM (GPS M8M/Q) or Flash (GPS M8N)
Supported antennas Active and passive
Odometer Travelled distance
Data-logger For position, velocity, and time (GPS M8N)
Operating temp. –40° C to 85° C
Storage temp. –40° C to 85° C (GPS M8N/Q)
–40° C to 105° C (GPS M8M)
RoHS compliant (lead-free)
Qualification according to ISO 16750
Manufactured and fully tested in ISO/TS 16949 certified production sites
Uses u-blox M8 chips qualified according to AEC-Q100
Supply voltage 1.65 V to 3.6 V (GPS M8M)
2.7 V to 3.6 V (GPS M8N/Q)
Power consumption4 23 mA @ 3.0 V (continuous)
5 mA @ 3.0 V Power Save Mode
(1 Hz, GPS mode only)
Backup Supply 1.4 to 3.6 V
GPS M8N-0 GPS M8 Concurrent GNSS LCC Module,
TCXO, flash, SAW, LNA,
Timepulse Configurable 0.25 Hz to 10 MHz
Package including:
– 1 x M8N GPS Module for APM Flight Controller
1x Black GPS Anti-interference Antenna Mount Holder Stand Case
Readytosky Pixhawk PX4 Flight Controller Autopilot PIX 2.4.8 32 Bit Flight Control Board+Safety Switch+Buzzer+I2C Splitter Expand Module+16GB SD Card
- ★The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system
- ★The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe
- ★Provide redundant power input and failover.5 high voltage compatible UART 1, 2 with hardware flow control.
- ★★★We have M8N GPS for the Pixhawk flight controller,ASIN : B01KK9A8QG.
- ★★★And the 3DR Radio Telemetry Kit for this flight controller,ASIN: B01DHV4DVA.
Similar items with 4 stars and above
Flight Controller Anti-Vibration Plate Vibration Damping Mount Shock Absorber Pixhawk Pixracer APM2.5/2.6/2.8 Quadcopter RC
- Useful applications from Flight controller isolation to “jello” free camera mounting
- It absorbs vibration, the center supported plate is ideal for sensitive electronics and cameras. The flush flat bottom mounting allows bolt or tape style attachment.
- Suitable for a number of Flight controllers, such as APM, pixhawk as well as the Mobius camera or even a GoPro turned sideways
- Material: Plastic and rubber (shock absorption is better than glass fiber)
- Weight: 17g (lighter than fiber glass material)
Package included: 1 set
Features: The universal vibration damping mount has a list of useful applications, from “jello” free camera mounting to Flight controller isolation.
It absorbs vibration, the center supported plate is ideal for sensitive electronics and cameras. The flush flat bottom mounting allows bolt or tape style attachment.
The rectangle mount can be used on a number of Flight controllers, such as APM, pixhawk as well as the Mobius camera or even a GoPro turned sideways. And comes with some additional mounting tape.
Specification
Color: Black
Material: Plastic
Note:
The color of the rubber ball is random(blue or black).
QWinOut DIY FPV Drone Quadcopter 4-axle Aircraft Kit :F450 450 Frame + PXI PX4 Flight Control + 920KV Motor +GPS + AT9 Transmitter + Gimbal Camera Mount
- HJ 450 Multicopter 450F nylon Fiber Frame Airframe kit Strong Smooth RC KK MK MWC DIY Quadcopter plane
- 30A Brushless ESC Speed Controller For RC Quadcopter Hexacopter
- Radiolink AT9 2.4GHz 9 Channel Transmitter Radio & Receiver TX &RX for RC Toy Helicopter
- Before Producing, The Manufacturer Have Set Up The Program, The Esc Do Not Need Additional Program.
- This ESC Do Not Have The English Instruction
Hardware Specifications:
processor
1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2.frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor
sensor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5611 precision barometer
interface
1.5 high voltage compatible UART 1, 2 with hardware flow control
2.2 CAN
3.DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10.External MICRO USB Interface
Package including:
1 HJ 450 Multicopter 450F nylon Fiber Frame Airframe kit Strong Smooth RC KK MK MWC DIY Quadcopter plane
2 Pair JMT 920KV CW CCW Brushless Motor
4 pcs 30A Brushless ESC Speed Controller
2 pair 1045 Carbon Fiber Propeller
1 pcs PIXHAWK PIX PXI PX4 Flight Controller
1 pcs 6M GPS with Compass L5883 25cm Cable
1 pcs Radiolink AT9 2.4GHz 9 Channel Transmitter Radio &Receiver TX &RX
1 pcs DJI GPS Folding Antenna Mount Holder Metal
12 pcs 3.5mm Bullet Connector ( banana plug )
1 pcs Hook & Loop Fastening Tape
1 pcs T Plug Male Connector
1 pcs IMAX RC B3 Pro Compact Balance Charger
4 PCS Black 140MM High Landing Gear Skid Wheels Tripod
1 pcs 11.1V 4400MAH 30C 3S1P battery
1 pcs Aluminum 2-axle Gimbal Camera Mount PTZ Steady with Brushless Motor Controller
powerday M8N GPS Module with Compass + GPS Folding Antenna Mount Holder for APM2.8 APM 2.6 Pixhawk PX4 Flight Controller
- Receiver type 72-channel u-blox M8 engine
- GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
- SBAS L1 C/A: WAAS, EGNOS, MSAS
- Manufactured and fully tested in ISO/TS 16949 certified production sites
- Note:When the GPS connection Pixhawk PX4 , there is a 6pin connector transfer interface in the package sent together, and the Pixhawk PX4 is connected after conversion.
A new generation GPS M8N,with low power consumption and high precision,
the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy,
support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol and mode or more.
GPS Specs:
– Galileo-ready E1B/C (NEO-M8N)
– Nav. update rate1 Single GNSS: up to 18 HZ
– Concurrent GNSS: up to 10 Hz
– Position accuracy2 2.0 m CEP
– Acquisition2 Cold starts: 26 s
– Aided starts: 2 s
– Reacquisition: 1.5 s
– Sensitivity2 Tracking & Nav: –167 dBm
– Cold starts: –148 dBm
– Hot starts: –156 dBm
– Assistance AssistNow GNSS Online
– AssistNow GNSS Offline (up to 35 days)3
– AssistNow Autonomous (up to 6 days)
– OMA SUPL & 3GPP compliant
Oscillator TCXO (NEO-M8N/Q),
– Crystal (NEO-M8M)
– RTC crystal Built-In
– Noise figure On-chip LNA (NEO-M8M). Extra LNA for
– lowest noise figure (NEO-M8N/Q)
– Anti jamming Active CW detection and removal. Extra
– onboard SAW band pass filter (NEO-M8N/Q)
– Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)
– Supported antennas Active and passive
– Odometer Travelled distance
– Data-logger For position, velocity, and time (NEO-M8N)
– Operating temp. –40° C to 85° C
– Storage temp. –40° C to 85° C (NEO-M8N/Q)
– –40° C to 105° C (NEO-M8M)
– RoHS compliant (lead-free)
– Qualification according to ISO 16750
– Manufactured and fully tested in ISO/TS 16949 certified production sites
– Uses u-blox M8 chips qualified according to AEC-Q100
– Supply voltage 1.65 V to 3.6 V (NEO-M8M)
– 2.7 V to 3.6 V (NEO-M8N/Q)
– Power consumption4 23 mA @ 3.0 V (continuous)
– 5 mA @ 3.0 V Power Save Mode
– (1 Hz, GPS mode only)
– Backup Supply 1.4 to 3.6 V
– NEO-M8N-0 u-blox M8 Concurrent GNSS LCC Module,
– TCXO, flash, SAW, LNA,
Package includes
1x Ublox NEO-M8N GPS Module Built-in Compass
1x GPS bracket
3DR Pixhawk Mini Autopilot
- One-third the size of the original Pixhawk
- Improved sensors lead to more stable, more reliable flight and navigation
- Included M8N GPS receives all of the GNSS constellations for better coverage in more places
- The hard-to-use DF13 connectors of the original Pixhawk have been replaced by intuitive Micro JST
Improvements over the original Pixhawk: Smaller, a third of the size, Rev 3 processor for long term software support, improved sensors, both primary and secondary IMU MPU9250 and ICM20608 for more reliable flight, included GPS module uBlox M8N GPS/GLONASS/BeiDou receiver for faster and stronger GPS lock, micro JST rather than the hard-to-use DF13 connectors, integrated piezo speaker and safety switch, natively supports 4S batteries with the included PDB. Advanced 32 bit ARM Cortex M4 Processor running NuttX RTOS. 8 PWM/servo outputs. Abundant connectivity options for additional peripherals (UART, I2C, CAN). Redundant power supply inputs and automatic failover. Integrated safety switch and optional external safety button for easy motor activation. Multicolor LED indicator. Integrated multi-tone piezo audio indicator. MicroSD card for long-time high-rate logging
Xiangtat 4pcs RC GPS Folding Antenna Mount Holder Set Kit for Drone Multicopter Quadcopter DJI WKM NAZA YS X4 X6
- Compatible with all GPS sticks. Color: Black, Silver, Red, Blue. Rod diameter: about 4mm, Height: about 16.2cm
- GPS Folding Antenna Mount Holder for Quadcopter Multi copter
- Sturdy build with the ability to fold into a lowered position.
- Fits most multi-rotors using 2 screw points.
- Adopt aluminum turning and CNC manufacturing for durable to use.
Compatible with all GPS sticks
GPS Folding Antenna Mount Holder for Quadcopter Multi copter
Sturdy build with the ability to fold into a lowered position.
Fits most multi-rotors using 2 screw points.
Adopt aluminum turning and CNC manufacturing for durable to use.
Easy to install and use.
Specifications:
Material: Plastic
Color: Black, Silver (Random color)
Height: 13cm
Dia.: 3cm
Compatible With: For QAV 250 etc multi copter
Net Weight( per pc ): 11g
Please attention, we will send random color item to you as our stock, so please check it before you bid it , thanks for your understanding
Package Including
4 * GPS Folding Antenna Mount Holder
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy pixhawk mount 3m, eg:
- What are Top 10 pixhawk mount 3m for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 pixhawk mount 3m to buy?
- What are Top Rated pixhawk mount 3m to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) pixhawk mount 3m?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for pixhawk mount 3m.
- Before deciding to buy any pixhawk mount 3m, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose pixhawk mount 3m and What you should consider when buying the pixhawk mount 3m and Where to Buy or Purchase the pixhawk mount 3m. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 pixhawk mount 3m of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about pixhawk mount 3m.
Conclusion
By our suggestions above, we hope that you can found pixhawk mount 3m for you.Please don’t forget to share your experience by comment in this post. Thank you!
