Top 10 Troy Bilt 2200 Psi Pressure Washer Parts

The Briggs & Stratton 6188 Pressure Washer Replacement Hose will replace worn or damaged hoses in cold-water pressure washers up to 3,000 PSI. Equipped with a Dual O-Ring Sealing System, the 6188 replacement hose will remain secure on your device. This 30-foot hose connects to male M22 pump and spray gun fittings, making it compatible with most brands of pressure washers. Help keep your outdoor power equipment running at peak performance by ordering the Briggs & Stratton 6188 Pressure Washer Replacement Hose. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them also ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations. For more than a century, Briggs & Stratton branded engines and power equipment have helped consumers get the job done. Known for hard-working, dependable, efficient products, Briggs & Stratton is the world’s largest producer of gasoline engines for outdoor power equipment. Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on all seven continents. Visit www.amazon.com/briggsstratton for more information on Briggs & Stratton and our extensive line of products.

This genuine Briggs and Stratton pressure washer quick-connect spray tips replace old, worn, or lost spray tips for pressure washers up to 4000 PSI. This kit contains four high-pressure pre-defined spray patterns from pin-point to wide fan for precise cleaning and one low pressure cleaning solution spray tip.

Pressure Washer Pump, 2800psi, Vertical 308653045 /308653052 2800 psi 2.5 gallons per minute Pre-filled with oil and ready to use Mounting Bolts Spacing between mounting bolts: 7 11/16″ – 6 3/16″ – 6 7/16″ 7/8 shaft Fits Honda GC135, GX140, GC160, Briggs and Kohler engines with 7/8 inch diameter shaft Will NOT fit 3/4” shaft motors, these motors require different pump Thermal Relief Valve IS Included but will need to be installed opposite the inlet fitting. WHEN MOUNTED, the inlet and outlet will point in the OPPOSITE DIRECTION as the spark plug. This part is compatible with the following machines: Homelite HL80833 3-N-1 Hi-Speed Gasoline Pressure Washer UT80709 Pressure Washer UT80911 Pressure Washer UT80911A Pressure Washer UT80709A Pressure Washer UT80835 3-N-1 Hi-Speed Pressure Washer UT80933 3-N-1 Hi-Speed Pressure Washer UT80993 Pressure Washer UT80993A 2700 PSI Gas Pressure Washer GC80747 G-Clean Pressure Washer HLCA80710 Pressure Washer HU80709 Pressure Washer HU80911 Pressure Washer HU80709A Pressure Washer HU80911A Pressure Washer HU80714 Pressure Washer HU80915 Pressure Washer HU80715 Pressure Washer HU80722 Pressure Washer HU80722A Pressure Washer HU80833 3-N-1 Hi-Speed Gasoline Pressure Washer HU80833A 3-N-1 Hi-Speed Gasoline Pressure Washer HUCA80709A Pressure Washer PS262311 Pressure Washer PS80944 Pressure Washer PS80946 Pressure Washer PS80979 Pressure Washer PS80979A Pressure Washer UT80993B Pressure Washer UT80993D Pressure Washer WF80710 Pressure Washer WF80911 Pressure Washer HL80835 3-N-1 Hi-Speed Gasoline Pressure Washer UT80993E Pressure Washer UT80993F Pressure Washer Ryobi RY80930 Pressure Washer

Product description

Briggs & Stratton Pressure Washer Hose; 1/4-inch X 25` 196006gs; New

From the Manufacturer

Genuine Briggs & Stratton replacement pressure washer hose that is 1/4″ x 25′.

✯Good Customer Service:✯
Any quality or use problem ,feel free to contact us. The professional service team is always here for you.

★Package Includes:
●1x Pressure spray gun
●1x Replacement Wand Lance
●5x Nozzles

★Specification:
☆Pressure spray gun
1.Length:18″
2.Requires pressure: 70BAR – 1000PSI;Maximun pressure: 275BAR – 4000PSI; Maximum flow:5.3Gpm.
3.Metric M22-14mm inner connector fitting.

☆Replacement Wand Lance
1.Length:19.68″
2.M22-14 fitting,1/4″ quick-disconnect end
3.Maximun pressure:4000PSI

☆Nozzles
1.degree:red(0°);yellow(15°);green(25°);white(40°);black(soap).
2.1/4 inch connection design

★Applicat
☆Pressure Washer gun with M22 connection, compatible with use with most of gasoline powered and electric powered pressure washers.
☆It allows you to apply soap and detergents, spray hard to reach places like crevices in sidewalks and driveways, clean stains from concrete and brick, clean painted surfaces like wood and lawn mowers, and wash windows and screens. No task is hard to tackle.

★WARNING:
DO NOT POINT AT FACE OR OTHER PERSONS, AND DO NOT USE CLOSE TO SURFACE.

2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8″ and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE. SPECS: FITS 7/8″ Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES. MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4″ – CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16″ – 6 3/16″ – 6 7/16″

It is the customers responsibility to make sure that this is the correct part for their unit. New vertical 7/8″ shaft pressure washer water pump for many different makes and models. SPECS: 7/8″ shaft, aluminum head, 2800 PSI, 2.3 GPM, Includes thermal release valve, chemical injector, garden hose hookup (22mm outlet), pump oil already installed, 1 year warranty against manufacturer defects. If you are not sure if this is the correct pump for your unit please send us model number off your machine and we will gladly check for you. PLEASE NOTE: Spacers may be required for installation depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine. Pump may require longer mounting bolts due to its thicker flange, for added strength.

Fits most pressure washers up to 3,000 PSI with standard 22mm connections

Schieffer textile braided hose is designed for use on gas or electric pressure washers with operating pressures of 3,000 PSI or less. Fits many DeVilbiss, Excell, Generac/Briggs, Karcher & Ryobi Light duty units with dual 22mm-14 female twist connects. Devilbiss & Excell # 17781, D28094 & D22166

Schieffer Makes The Hose – Schieffer isn’t just an assembler. Schieffer makes most hose stock in one of it’s modern, highly controlled, state of the art hose factories.

Number One – Schieffer has made more high pressure spray hoses than any other company in the world, Schieffer stands alone

Features:
Made in USA with high quality components
4:1 Burst to operating pressure
Smooth thermo plastic cover
Textile braided reinforcement
Seamless inner tube
Superior strength, ozone, abrasion and kink resistant

Specifications:
Hose: 1/4” ID x 25’ Long
Maximum Pressure: 3,000 PSI
Molded black bend restrictors on both ends
Ends: (2) 22mm-14 Female twist connects
Weight 2.0 lbs

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Troy Bilt 2200 Psi Pressure Washer Parts, eg:

• What are Top 10 Troy Bilt 2200 Psi Pressure Washer Parts for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Troy Bilt 2200 Psi Pressure Washer Parts to buy?
• What are Top Rated Troy Bilt 2200 Psi Pressure Washer Parts to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Troy Bilt 2200 Psi Pressure Washer Parts?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Troy Bilt 2200 Psi Pressure Washer Parts.
• Before deciding to buy any Troy Bilt 2200 Psi Pressure Washer Parts, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Troy Bilt 2200 Psi Pressure Washer Parts and What you should consider when buying the Troy Bilt 2200 Psi Pressure Washer Parts and Where to Buy or Purchase the Troy Bilt 2200 Psi Pressure Washer Parts. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Troy Bilt 2200 Psi Pressure Washer Parts of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Troy Bilt 2200 Psi Pressure Washer Parts.