Which Is The Best Watts Hot Water Temperature Control Valve
Nowadays, there are so many products of watts hot water temperature control valve in the market and you are wondering to choose a best one. You have searched for watts hot water temperature control valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings watts hot water temperature control valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Watts USG-B-M2 3/8" Under Sink Guardian Thermostatic Mixing Valve (0204141)
Watts USG-B-M2 3/8″ Under Sink Guardian Thermostatic Mixing Valve (0204141)Series USG-B Under Sink Guardian 3â„8″ (10mm) compression fitting thermostatic mixing valves maintain and limit hot water to desired selectable temperature between 80 degrees Fahrenheit and 120 degrees Fahrenheit (27 degrees Celsius and 49 degrees Celsius) with flow rates as low as 0.5 gpm (1.9 lpm) and as high as 2.5 gpm (9.5 lpm). The mixing valve is listed to ASSE Standards 1070 for single fixture applications. The USG-B series uses a double throttling design to control both the hot and cold water supply to the mixed outlet. The superior flow characteristics of this valve provide accurate temperature control (±3 degrees Fahrenheit) with low pressure drop. As an added feature, the USG-B-M1 incorporates dual check valves to protect against cross-flow and integral screens to filter out debris.The unit is intended for under sink installation to control the hot water temperature and prevent accidental scalding. The water temperature must be adjusted by the installer using a thermometer to measure the hot water temperature at the faucet outlet. Maximum temperature of 110 degrees Fahrenheit (43 degrees Celsius) is recommended.Watts USG-B-M2 3/8″ Under Sink Guardian Thermostatic Mixing Valve (0204141) Features:• Maintains mixed water temperature to 3 degrees Fahrenheit up to120 degrees Fahrenheit (49 degrees Celsius).• Installs easily between the stop valves and faucet• Includes tamper resistant locking cap to prevent accidental mis-adjustment.• Built-in check valves prevent migration of hot water to cold and cold water to hot water piping.• Provided with cap for three port application.• Integral strainer with 40 mesh stainless steel screens to filter out debris.
Watts – LFMMV-M1-UT – 3/4 Union Inlet Type Thermostatic Mixing Valve,NoLeadCopper Silicon Alloy, 13 gpm
TEMLOCK Thermostatic Mixing Valve for Point-of-Source – 100-140°F Adjustable Water Temperature Anti Scald – Lead-Free Brass – 3/4” Sweat Fittings & Integral Check Valves
- DO YOU WANT TO SET YOUR WATER BOILER AT 140° F SO YOU CAN KILL HARMFUL BACTERIA BUT ARE WORRIED ABOUT CHILDREN GETTING SCALDED? TEMLOCK thermostatic mixing valve allows you to set your water heater at 140° F. Then simply set the valve at the safe temperature of around 120° F.
- DO YOU WANT THE WATER TEMPERATURE OF YOUR SOLAR HOT WATER SYSTEM TO BE MORE CONSTANT? TEMLOCK thermostatic mixing valve will help you maintain hot water temperature to your desired temperature, for example 120° F.
- ARE YOU ALWAYS RUNNING OUT OF HOT WATER BUT CANNOT INSTALL A LARGER TANK? TEMLOCK thermostatic mixing valve allows you to keep your current boiler. Simply set your water heater at higher temperatures and set the thermostatic mixing valve at the safe temperature of around 120° F. With these settings, the valve will use less hot water from your boiler !
- DO YOU NEED TO CONTROL THE WATER TEMPERATURE IN YOUR PEX RADIANT FLOOR HEATING OR OTHER HYDRONIC APPLICATIONS? No worries ! Use TEMLOCK thermostatic mixing valve to set water temperature to your desired level.
- TEMLOCK TEMPERATURE ACTUATED MIXING VALVE IS DESIGNED FOR CONTROLLING IN-LINE WATER TEMPERATURES IN DOMESTIC HOT WATER SYSTEMS AND INSTALLED AT THE HOT WATER SOURCE, INCLUDING BOILERS, SOLAR WATER HEATERS, AND RADIANT FLOOR HEATING SYSTEMS. TEMLOCK mixing valve is not intended to be installed at point-of-use such as sinks or showers.
Sloan 3326009 Valve, 1 Pack
Product Description
Every day around the world, Sloan products connect the systems that manage our planet’s most precious resource. As the world’s leading manufacturer of commercial plumbing systems, they’ve spent more than a century pioneering smart, water-saving restroom solutions that are built to last a lifetime.
From the Manufacturer
Regardless of your requirements, Sloan offers a variety of solutions to meet your water conservation and restroom needs. For below deck installations with built-in check valves.
Similar items with 4 stars and above
KES ML100 SOLID BRASS 3-Way Thermostatic Mixing Valve G 1/2 Male Connections, 68-119 ¨H Stepless Adjustment
- Shape Memory Alloy (SMA) cartridge, ensuring precise control and long lasting.
- PREMIUM BRASS BODY: ONE-PIECE STURDY BRASS (non-plastics) faucet body ensures quality and longevity.
- CONNECTION: 1/2″ male connections.
- 68-119 ¨H/20-48¡æ Stepless Adjustment
- Ideal for bathroom, washroom, kitchen, wash and etc.
SPECIFICATIONS
-Body Material: High Quality Brass
-Cartridge: Shape Memory Alloy (SMA), precise control and durable
-Connection: 1/2″ male straight threads
-Inlet Cold Water Temprature Requirement: 34-84°F/1-29°C
-Inlet Hot Water Temprature Requirement: 113-210°F/45-99°C
-Outlet Water Temprature: 68-119 °F/20-48°C
-Notice: Press Red Button if you need water higher than 100°F or 38°C
Package Includes
1x Thermostatic Mixing Valve
About KES
Founded in 1996, KES is a professional manufacturer in kitchen and bathroom industry. We strive to provide industry-leading quality, affordable products to customers worldwide.
– ISO9001 certified quality management system
– Socially responsible company, BSCI compliant
– Original designs under global patent protection
– Served millions of users from Europe, North America and Asia
– Walmart, Home Depot trusted supplier
– ISO9001 certified quality management system
Watts 500800 Instant Hot Water Recirculating System with Built-In Timer, Easy to Install
- WATTS HOT WATER RECIRCULATING PUMP: Provides hot water at every faucet or shower when needed, eliminating wasted water , 0.5 inches bypass value
- BEST SELLER RECIRCULATING SYSTEM: Conserve Water – Up to 15,000 gallons of water per year. Save Money – Up to 10% of your water bill and its cost only 5 a day to operate
- EAST TO INSTALL: This unique product connects easily to existing plumbing. Easy to install in less than 1 hour. And it is maintenance free
- WATTS HOT WATER RECIRCULATING SYSTEM: The Kit Includes: Pump with timer, 2 adapters with rubber washers, valve mounting screws, sensor valve, two 12-inch supply lines
- RECIRCULATING PUMP WITH TIMER: 24-hour programmable timer activates pump when you need it. And it is extremely quiet compared to other system in the market – no vibrations. Do not use with tankless water heaters. Insert the 115V plug on the line cord from the pump into a properly grounded 115V outlet
Product Description
Specification:
- Voltage: 120 volts
- Item Weight: 8.5 pounds
- Overall Dimension: 6.2 x 6 x 5 inches
- Size: Full
- Color: Blue
- Material: Case
- Warranty: 1 Year
Never wait for hot water again! The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. System that provides instant hot water to every faucet or shower in a home when you need it. Stop throwing money down the drain and waiting for your hot water.
From the Manufacturer
The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.
Cash Acme 24505 In-Line Thermostatic Hg110-D 3/4-Inch Mixing Valve with Sharkbite Connections And Intergral Checks
- CASH ACME Heatguard 110-dlf thermostatic mixing valve with SharkBite connections 3/4 in lead free
- CASH ACME Heatguard 110-dlf thermostatic mixing valve with SharkBite connections 3/4 in
- This is manufactured in Australia
- Connection or adaptation of Heat guard valves to various pipe systems
- Use with Heat guard 110, 160 and 115 base valves
- Available in sweat, barb/PEX, compression, threaded (NPT) and CPVC
Honeywell AM101-US-1 Sparco Thermostatic Mixing Valve, 3/4″ Union-Sweat 100-145F
- 3/4 in Sweat Union Mixing Valves
- Features dual purpose mixing or diverting values
- Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
- Provides reliable performance at minimum flow of 05 gpm and proportional valve for simultaneous control of hot and cold
- Maximum pressure 150psi and maximum temperature of 212 F (100C)
Motorized Ball Valve- 1/2" Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid
- SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable
- The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last
- NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards
- This electrical ball valve is full port, meaning the bore in the ball is a full1/2”
- This minimizes pressure loss through the valve
- Perfect for home automation projects
- 9V-24V AC/DC- Works effectively over entire voltage range
- Will open or close valve in 3-5 seconds
- Limit switch minimizes power after valve is fully open
- Ideal for projects where an automatic return is necessary
- 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening
- Returns to fully closed if power is removed
- ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed
- This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time
TargetEvo 3-Way Mixing Valve with G 3/4" Male Connections Lead Free Brass Body 95-140F Temperature Range Anti-Scald
- SPECIFICATIONS: Lead Free Brass body construction
- All 3/4″ male connections – DN20 (4x3x2in)
- FUNCTION: Thermostatic mixing valve is designed to connect the hot and cold water, and maintain temperature to provide maximum comfort
- TEMPRATURE: Inlet Water Supply Temprature: Cold 39-84 F/4-29 C
- Hot 122-203 F/50-95 C
- Outlet Water Temprature Range: 95-140 F/35-60 C
- SAFETY: If the cold water stop suddenly, the valve will automatically close to avoid the risk of scalding
- FUNCTION: It offers outstanding anti-scald, anti-chill protection, allow you to quickly achieve and maintain the ideal temperature setting for a more enjoyable shower experience
Specification
Material: Brass main body
Work Pressure: 1.0 MPa
Size: DN203/4″ Male
Product size: 4*3*2in
Thread: G thread (male)
Inlet Cold Water Supply Temprature: 39-84F/4-29C
Inlet Hot Water Supply Temprature: 122-203F/50-95C
Outlet Water Temprature Range: 95-140F/35-60C
Suitable medium: fresh water/drinking water, water/antifreeze additive (glycols less than 50%)
Delivery content
1 x Mixing Valve
Note
Little color difference, is subject to material object.
There might be slight measure difference due to manual measurement error.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found watts hot water temperature control valve for you.Please don’t forget to share your experience by comment in this post. Thank you!